HT4085 Hi, my iPad have no any button to adjust the volume. So, what can I do?
Hi, my ipad2 sound system can't found the button to adjust the volume. So, what can I do now?
You could have accidentally changed the volume rockers for the notification alerts. You can change this by going to setting<sounds, then under "Ringer and Alerts" there is an option called "change with buttons." Just tern this off and it should work if did happen the way I think it did.
I hope I helped!!!
Similar Messages
-
I have an iPod with iOS 4.2.1 and would like to up date to version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?
You cannot update it if you can't get the latest version of iTunes. Actually, the latest version of iTunes will run in XP if you have Service Pack 2. Also, you posted in the iPad forum, and your profile shows you have an iPad, but in your post, you say it is an iPod. Is it an iPad or an iPod?
-
I have managed to sync a ringtone to my ne i phone 5C but the volume is way too soft.
The sound is great on my computer but hard to hear at all on the phone. I have tried turning up the volume button on the phone but it doesn' do anything for the ringtone. Any ideas on how to solve this problem. The ringtone is "calypso blackberry" and I am not able to locate it in the Apple store ringtones. This should be so simple and it is making me nuts.
Help anyone please.
BobSo you use an RCA cable going into what before it hits the MBP?
EDIT: Also in System Preferences > Sound > Input > you can select the input & adjust the volume accordingly as long as it's plugged in. -
hello there i just have 1 question, i have forgotten my security answers to the login questions how do i reset/change these, so atm i cannot get into the itunes store on my new ipad2?
Hi sjs1983! You can get support for your Apple ID here:
http://www.apple.com/support/appleid/ -
Pressing the Lock/Power button now adjust the volume
When I am done using the phone (S3) I've always pressed the right bottom (Power / Lock) so that the screen will blank out.
Now, since the 4.3 upgrade, when I push the right hand Power/Lock button, 1/2 of the time, it brings up the VOLUME control.
This is a real pain, and I do not see a way to disable.
Please advise, this is very fustrating.Thanks Ann, It's weird, It just started with the upgrade, but I will make a conscience effort to watch that. It could very well be the case, which would be an easy fix.
Thanks for the suggestion.
-Bob -
My PC says it cannot download the latest Adobe Digital Editions update. The notice says I should check I am connected to the internet. I have done this and am connected.What can I do next?
You can explicitly download the latest version of ADE from:
http://www.adobe.com/solutions/ebook/digital-editions/download.html -
HT201441 In the activate ipad sceen and cant get ahold of the old owner what can i do
can somebody help me
If you deleted them from your iPad and iCloud, they are gone (unless you made a backup after you took the photos but before you deleted them.
Barry -
The stereo headset is not working properly
Try deleting your hotmail account and then adding it back as an Outlook account instead of "other". It worked for me.
-
Nomad Jukebox scroll buttons adjust the volume - I can't scroll up or d
Can anyone tell me what's wrong with my Nomad? I can't make any selections because every time I press the scroll down/up buttons I adjust the volume (that's what the screen indicates). How do I fix this? I loaded the latest firmware from the Creative web site.
Which Jukebox do you have? If it's the original Jukebox, it's probably because you got the beta firmware (JBFW40J_298J_Dual_BETA.exe), it changes the navigation of the player. There are two firmwares included in the file, if you don't like the navigation one uses, you can try the other firmware.
Cat -
I have 3 Dell laptops at home and I am unable to connect my iPad 1 to any of them using the USB cable. If I connect the iPad to any Apple computer using the same USB cable, it works perfectly. I have installed the latest versions of iTunes and iOS, but still no luck. Apple Store Geniuses helped me determine that it wasn't my iPad causing the problem, but were less helpful when it came to dealing with non-Apple devices.
Options?Does the OS see the iPad at all? In other words does it show up in either the My Computer or Device Manager?
I've had problems in the past where I had to modify the registry to get my son's iPod to sync with a particular HP laptop.
If it doesn't show up at all have your tried using an external hub (with or without power)? -
My iphone 5 will not turn on ....I have held both buttons down at the same for a long time and get nothing ...it is fully charged ....and other suggestions?
The screen on my iPhone 5 (iOS 8.1.3) went dark after unplugging it from the PC. I could still could see a backlight on the screen, but unresponsive. iOS was hung in this state.
I opted to try a reset holding power and home button, which succeeded in turning off the phone.
After that, the screen went completely off. Power button didn't appear to turn on the phone.
Upon plugging back to iTunes, I discovered, even as the screen was pitch black, the phone was actually able to power on, or off if I repeated the reset....I could hear the USB connection chime on the PC every time I powered on or reset. The iOS was in some sort of corrupted state with no screen output.
I couldn't restore to factory settings, as iTunes requires I disable "Find My Phone" on the phone itself, which I couldn't do without screen output. Also tried to put the phone in "Recovery Mode"...didn't work either.
I finally succeeded by:
Logging in via web browser to iCloud, locating the phone with the "Find My Phone" web app, and triggering [Erase]. iCloud reported the phone was successfully erased.
After a minute, the phone rebooted itself and screen output worked again.
I then restored my data and settings from my last backup using iTunes without further issues.
Hope this helps others. -
Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append
Hello, Miryam Maria.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with sound on applications when playing video/audio content. If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute. Below I have included an article that covers adjusting the settings for the side switch. Also, make sure to close all applications in Multitasking and power cycle the device. Test the sound issue after processing these steps.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H. -
Hi there has been someone on my game clash of clans on my iPad and have spent over £50 and I need the money back what can I do?
Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling -
HT4623 WHY IS MY IPAD HAVE A PASSCODE AFTER I UPDATED THE NEW VERSION?
why is my ipad have a passcode after updating new version?
If you can't remember the passcode:
FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
My Ipad2 has a message: Ipad disabled connect to itunes. The trouble is I am out of the US now and cant connect to my my home mac or any computer it is synced with. What can I do? I cant even access the serial number to contact apple. Help!
Call Apple anyway. If the device was ever registered with then they will have the serial # on file and can look you up by other info such as your name or phone number.
To re-enable an iPad any computer with iTunes should work. However, if your data was not backed up to iCloud you will not be able to access it until you get back to your home computer.
Maybe you are looking for
-
Page Fault Processor Exception TSA Scan
Been getting the following Abend when running a backup job with Backup Exec 12. This only happens when trying to backup the OFFiles directory. Tried to run a nss /poolverify , but it keeps crashing the server each time I try to run. Server is 6.5 wit
-
How to route the ctr0 in DAQ MX for PXI 6229?
Hello, The counter ctr0 of the PXI 6229 is internally wired to PFI12. How could i change the terminal on which this counter is wired? What is the function in LabWindows CVI 7.1 (NI_DAQ MX 7.3) should be used? Is there any example of this? (in all the
-
JWS Hanging when updated jar available
Hi, When I make an updated JAR file available, it gets downloaded and verified correctly (it's signed), but then nothing. The progress dialogue simply says that scanning has reached 100%. There have been a couple of threads along these lines, but not
-
Printer HP Officejet Pro 8600 Plus ePrint set up, printer has an e-mail and number of users with their e-mail adresses has been entered and stored as to be allowed to use the printer. When one of them tries to send a mail to the printer, it is receiv
-
How to install licenses on 2 RDSH servers behind F5 load balancer
I want to setup 2 separate RDSH servers behind a F5 load balancer. The load balancer is there to spread out the compute load between 2 VM servers as the application the users are using are somewhat "heavy" in nature. I have 10 users who will potent