HT4085 I have a I pad MD522LL/A version 7.0 and cannot get off of mute I have tried items in settings and moving back lock switch as well as volume any help

I have a I pad MD522LL/A version 7.0 and cannot get off of mute I have tried items in settings and moving back lock switch as well as volume any help

Hey there,
It sounds like you are unable to get any sound from your built in speaker on your device, even after toggling the side switch. I recommend the troubleshooting from the following article named:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
The article title mentions the iPhone, but the steps are relevant for the iPad as well.
Thank you for using Apple Support Communities.
Regards,
Sterling

Similar Messages

How do I get off this list-I've tried changing my settings and am still getting inundated with emails-help

I have changed and saved my settings several times and still continue to get emails. Where do I go to stop this.

From your profile page, click Edit Preferences and on the next page, click the Email Notification Preferences tab and select No for either all the options or the desired ones.
B-rock

HT201272 i have purchased audiobooks on itunes, I have purchased a new computer and cannot get them again. I have tried to upload them to the icloud but my old computer wont let me, How do i get them from old computer to new without buying again?

Hi
I have puchased several audiobooks on itunes with my computer and i phone. I have recently purchased a new pc and have installed icloud and imatch. I cannot upload my books to either ot these. when I go to find the books on i tunes it wants me to pay again. How do i get these audiobooks from my old pc to my new pc?

support.apple.com/kb/HT1848
use instructions to transfer your books, apps and music from phone, ipad, ipod to computer.
http://support.apple.com/kb/HT4527
you might find that helpful as well.

I have a Mac PC OSx, version 10.5 and cannot get Icloud even though I have downloaded all new software? gh I have downloaded all available software.

I have a Mac PC, OS X, 10.5.8 Version but cannot download ICloud and I was led to believe this version supports it. I have downloaded all available software. Does anyone have suggestions? Just realized I need later version - - 10.7.5 or later. How do I go about upgrading this operatin system?

10.7 is no longer avaiable for immediate download. You need to purchase a download code, which will be delived by email in 1 to 3 business days. Using that code, you can download the software from the Mac App Store, and it will stay available for re-download from that Apple-ID.
http://store.apple.com/us/product/D6106Z/A/os-x-lion
To get the Mac App Store, you need to purchase a Snow Leopard 10.6 Installer/Utilities DVD. This physical DVD will be shipped to you by conventional means. The software can be Installed and re-installed from the DVD.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

I recently updated to Firefox 4. It worked that whole day, but next morning I get a crash error message and cannot get into Firefox. I've tried some suggestions on the site, but no help. Should I uninstall Firefox, then reinstall.

I can't even get into Firefox to troubleshoot

I don't know if this helps, but I'm still working on this problem and took a screen shot of my Console Message errors:
What's happening here is opening the program, trying to save and it crashes. Then trying to open the program again and it crashing before it even opens. Finally opening the program a third time and trying to save it using "save as" instead of "save" (which I found one forum recommending) and it crashing again.

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run.

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run. I tried 7.0.4 and 7.1.2, both from Apple software update and both crash during "loading themes". I am reluctant to upgrade OSX from 10.7.5 because I do not want to loose Final Cut Express 4.0.1. Apple Care no longer supports iDVD. I want a version if iDVD that supports Chapter markers as in iDVD 7.?.? that i used with my old (now deceased) Apple Power PC Mac Pro.

iDVD 7 should work fine with 10.7.5. Try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

HT4970 I have chosen not to use iCloud for the time being, and cannot get the Reminders i input on my Mac to replicate to my iphone and iPad? any help is appreciated.

I have chosen not to use iCloud for the time being since the syncing was inconsistently working with the calender and contacts; and cannot get the Reminders on my Mac to sync/replicate onto my ios device, neither iphone nor ipad. Help is appreciated in respect to Reminders. Thank you.

ok, thanks. couple other questions...
1. will it sync to my reminders on my MAC too if i enter via icloud? if not, what's the reason for having the reminder list available on my Mac if it can't sync?
2. I have 2 different email accounts, one with a .mac address and another with .msn. both can be accessed via icloud. i ran a test using my msn acct as the signin and it logged the reminder onto both the iphone and ipad fine.
however, when i try with my mac address, it only shows up on my iphone, which list reminders under icloud(which worked on both devices and then under mac which worked only on the iphone, not ipad. any idea why that might be happening?
thanks for your help.

I have tried several times to download ISO 5 but it is "coruppt" everytime? any help?, I have tried several times to download ISO 5 but it is "coruppt" everytime? any help?

I have tried several times to download ISO 5 but it is "coruppt" everytime? any help?
its really beginning to bug me as it a fairly big download...
once it is "complete" it brings up a error message saying that the file was only partially done or was corrupt and to try again...
any help?

trying again now..

When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!

When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

I have many songs on my iphone that play half way through and then the sound just stops, when I look at my phone the song is still playing, just no sound. Any help on how I can fix this?

I have many songs on my iphone that play half way through and then the sound just stops, when I look at my phone the song is still playing, just no sound. Any help on how I can fix this?

Could be a defective SIM. Try a new one from your carrier.

I have imported a jpeg photo into iPhoto and cannot get the Places map to let me fix a position on the map. It remains disabled for my photo. Checking out the Help file has not given any solution.

I have imported a jpeg photo into iPhoto and cannot get the Places map tp show. I have tried the Help file and the information was not helpful. Can anyone give advice here?

I am using iPhoto 9.1.1. When I select thephoto, then Places I get the window (Places to lookup disabled). When I hit theInfo button I get the size an JPEG notification, and Faces and Key words. The “reverse” of thepicture shows a window with Rotate, Hide, Trash etc.
When I select Places, get the Google worldmap, and this case a pin on Sydney Australia showing that eighteen photos arecorrectly placed. I am unable to make the connection to San Francisco wherethis particular photo was taken on a very modern camera.
Regards,
Theogt

I just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.

i just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.

Welcome to the Apple Community.
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p.

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you hel

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

Bluetooth is no longer working on iPhone 4s. It used to work very well. Not any more. Have tried reset network settings and all settings, no joy. Never had bluetooth problems before. Have tried connecting to other peripherics nothing works. Can you help? Thank you.

My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-insta

My Bridge CC opens in a locked mode - I cannot make any changes (dump cache) - it says "other instances of Adobe Application Manager are running, which must be closed." I have to force quit Bridge to get out of it. I tried to uninstall Bridge and re-install it but it did the same thing. Any ideas where to go next?
The fact that I uninstalled Bridge and reloaded it has me concerned as to what to do next.?

You need to force quit all other (real or fake) instances of the Application Manager. Instructions differ between Mac or Win.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Since Windows 2003 Services ending we moving Sharepoint Services 3.0 to Windows 2008R2, Any help how can this be done ?

Since Windows 2003 Services ending we moving Sharepoint Services 3.0 to Windows 2008R2,
Any help how can this be done ?
We have 1 Server and single Farm.
I have build New 2008 R2 Server and planning to restore Backup taken from Old server to this new server. Will this work ?
Which version of Sharepoint should i install on Windows 2008 R2 server , i run sharepoint.exe downloaded but it throws error

Sorry for late reply.
Your next step is, create a new web application and deattach the content DB from new web application. You need to attach existing CDB to that web app.
Here is some links for your ref (unfortunately this is for 2010 but it same steps should work in WSS as well)
http://nikpatel.net/2009/03/11/step-by-step-process-move-site-collections-from-one-content-database-to-another/
http://www.sharepointpitstop.com/2012/06/attachdetach-sharepoint-webapp-contentdb.html
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

HT4085 I have a I pad MD522LL/A version 7.0 and cannot get off of mute I have tried items in settings and moving back lock switch as well as volume any help

Similar Messages

Maybe you are looking for