HT4097 how to charge ipad 3 ! when connect usb charge hanged on apple logo !
and when i want restore to 6.0.1 ===> error 1602 . i have edited host file but The problem remains ! help me
Are you doing this?
If you can't update or restore your iPhone, iPad, or iPod touch
Similar Messages
-
i pod 3 rd generation
was left in the car for like 4 hrs, seems that the temperature was high
ever since it stopped working unless connected to power source wall mounted
when connected to PC it just shows the apple logo on the display
itunes can not read the ipod of course
is it something i can fix by myself and howTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
How to fix your iPod when it's frozen on the apple logo screen?
I tried to charge and restart it, but neither one worked. It has remained on the apple logo screen for two days.
Two days is two days too long. Read this which will eventually lead you to the procedure to restore the iPod:
iOS: Not responding or does not turn on -
Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g
does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g
See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
Mac pro does not recognize ipad device when connected via usb port, suggestions?
mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7
Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro? -
my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody
try restoring see guide
http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml -
Ipad is looping from the charging to the apple logo helppp????
ipad is looping from the charging to the apple logo helppp????
If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
After I slide to power off my iphone 3GS it would not turn on again.Only the apple logo comes on and then it is off. If I connect to the power the apple logo comes
and then it comes on . I have just used itunes to restore my iphone. How can I make my iphone work again?Keep using it untill it powers off, then charge it to full to re-calibrate the battery.
If problem persist, maybe your battery needs to be replaced. -
I dropped my iphone 5 in the water, its dead and when I try to charge it the apple logo comes and goes, thats my only sign of life, I've done many after market repairs but what I want to know is if I should replace the ligntning port or the battery... or just buy a galaxy s5?
If you dropped it in water, and then plugged it in, you may very well have destroyed the battery and/or the logic board. Charging/plugging in to a power source is very damaging to wet electronic devices. There is not much you can do but replace the entire iPhone...and since you did repairs yourself Apple will not do an out-of-warranty replacement.
You can try replacing the battery, the lightning port is another issue, but I would not expect that iPhone to work again. -
I bought a hd movie on my iPad , however when I try to play on Apple TV 1st generation. It does not appear or says content not available. My TV is hd compatible
AppleTV1 only supports HD upto 720p - chances are the iPad HD vserion is 1080p and beyond ATV1 capability.
Also do not expect recent iTunes purchases to appear on AppleTV 1 store menus as purchased - ATV1 does not know about 'cloud access'.
Best option is to download the 720p version (set in iTunes Preferences on computer iTunes) and sync/stream to AppleTV 1 from iTunes. -
Where do i go on my ipad 3 to connect to airplay on my apple tv?
where do i go on my ipad 3 to connect to airplay on my apple tv?
The Control Center.
http://support.apple.com/kb/HT5858
Use one finger to flip up from the bottom of the screen on your iPad with iOS 7 and that will bring up the Control Center.
What iOS do you have? -
My iPad constantly turns off and restarts, showing the apple logo on the screen. How do I fix this?
My iPad constantly shuts down, then restarts showing the apple logo. This happens over and over. I have tries resetting and restarting. What to do next?
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
(no media or data will be deleted from the device, this will only take a minute).
If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766 -
how to resolve error 21? my iphone 4 just showing apple logo... when i'm trying to restore it... it is showing error 21 n that's not letting me restore it pls help
From the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them. -
Why does my ipad 2 go to battery, connect to itunes and and apple logo?
why does my ipad 2 go to battery, connect to itunes and and apple logo?
seventy one wrote:
< off topic > Seeing your name I was inclined to add 'Old codger' to my Seventy One. -
My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766
Maybe you are looking for
-
Error in executing ODCIIndexStart()
I a Search Application,I need to find the documents, where a StringAttribute (Author) contains any of the values in a specified array. For this purpose, I use an AnyOf-query (combined with some other queries). Alas I keep getting the following error-
-
Hi All, I need to know if there is some standard report availbale in SAP on Vendor Evaluation, where i can check all parameteres related to Vendor's Performance. thanks & regards, Prashant Rathore.
-
My macbook pro took 4 hrs to switch on and once it was on, it was super slow
My macbook pro took 4 hrs to switch on and once it was on, it was super slow
-
Running Premiere on a Mac Pro 1.1
I currently run a Mac Pro 1.1 that's maxed out with OSX 10.6.8. My system will not be able to support the most current Adobe Premiere Pro CC (2014) which states it needs 10.8 or higher. The previous Premiere version worked great when I downloaded a
-
ESTK object model viewer has no documentation!
I can't find the relevant information about Indesign,Incopy and idserver script objects. The viewer enlists: (and nothing else) my current setup: I installed ESTK 3.5 directly on my dev machine, e.g. downloading estk from (http://www.adobe.com/devnet