HT4097 my ipad not responding when i connected to pc

my ipad2 not responding when i connected to pc, like no device connection to cpu

Do you mean evil your device is not recognised in iTunes for Windows? If so,
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/

Similar Messages

  • My iPod is not responding when I connect it to my PC. What Should I do?

    I have been trying to connect my iPod to ny computer so that I can sync music to it, but it's not responding. I tried all the steps on the apple website & it still doesn't work. I have a 3rd genereation iPod touch.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Itunes not responding when iphone connected or when itunes is opened

    When I try to open iTunes on my windows 7 computer, it will not open completely before it says its not responding.  Sometimes itunes will open, but as soon as i plug in my iPhone 3s it will not respond.  I do not have any podcasts on the phone.

    See Here for,
    http://www.apple.com/support/itunes/troubleshooting/

  • Volume control will not respond when iPod connected to Griffin iTrip

    When I connect the iPod Classic 80GB from the bottom to the Griffin iTrip and to a 12 volt source, and listen to the music on an external FM radio, as in a boat, I cannot change the volume through the wheel of the iPod. I have to go to the radio to change volume.
    What do I have to do so that the volume can be changed from the wheel of the iPod?
    I would appreciate very much the solution to this problem.
    Suribe

    This is normal - cant adjust the volume from the iPod if we connect it via dock (the bottom of the iPod). If you would like to adjust the volume with the wheel of the iPod, then you should plug your iPod via its earphone jack - of course, different cable i.e. minijack to RCA audio cable

  • Safari not responding when HTTPS connections are unavailable

    I'm using a 13" MBP with 10.7.2 installed, which is setup to sync calendar, address and bookmarks with iCloud. Since last week I've constantly encounter a problem that my Safari 5.1.1 would keep crashing, and I had to delete the ~/Library/Safari/extensions folder to get it back to work.
    This situation happened whenever I've switch to wireless connection. In my office we've setup a limited wireless environment that all HTTP/HTTPS connections will be redirected through a proxy. Since last week the proxy server was malfunctioned. All HTTP connections are proceeded normally, but all HTTPS connections will be suspended. I'm not sure but I suspect it's the main reason for the crashing problem.
    The syndromes are:
    1. When I left Safari open, unplug the ethernet, and turn-on WiFi, everythings goes on normally, until I open an HTTPS web page, for example, https://www.icloud.com. Of course that HTTPS URL will not load, since our proxy is broken; but the connection itself will NOT timeout. I've tried to leave it connecting for 10 minuntes, and it's still there.
    2. The statement above may due to a glitch in our proxy server and I can understand that. But the problem is: after I tried to open an HTTPS connection, the Safari will refuse to open any other URLs, including normal HTTP connections. It will just keep "connecting". Meanwhile the FireFox and Chrome can load these HTTP pages normally.
    3. If I quit Safari in this situation, Safari will not be able to re-launce: the icon will keep bumping on the dock. I have to force quit Safari and delete extensions folder, so that it can be launched again. But even after Safari re-launced, it still refused to load HTTP pages.
    4. Neither reconnecting WiFi, relogin, or switching back to ethernet can fix the problem. I have to restart the whole system to get it back to normal.
    It seemed to me that some Safari-related process will keep in the system after Safari is quited. And that process may keep the inactivated HTTPS connections alive in its TCP pool, and blocked all sequence connections, including the iCloud synchronization. And while I force-quit Safari, the extensions.plist file is damaged. That's the only plausible explanation to this situation.
    I'm sure this situation is introduced after 10.7.2: it's not the first time our proxy server breakdown, but I've never have this problem before.

    I've done some detailed test and now I can give a conclusion:
    1. It's confirmed that sequence HTTPS connection will be blocked in Safari and Google Chrome after a failure HTTPS connection (due to proxy). And rebooting is the only way to recover connections.
    2. My previous observation is wrong: this is NOT a system wide problem. FireFox is not affected. FireFox will return to normal and all sequence HTTPS connection can be proceeded without any problem when I reconnect to a valid network connection (i.e. ethernet), while the Safari and Google Chrome remained being blocked. And DropBox is NOT affected as well.
    3. None of the solutions mentioned in other threads can solve this problem. Checking the "Auto proxy discovery" does not help. Delete ~/Library/Preferences/com.apple.security.revocation.plistfile does not help. Clean Keychain does not help either. I've created another account for testing.
    4. It's apparently something related to some system built-in network services. Since the FireFox and DropBox both gets its' own Proxy implementation, while Safari and Google Chrome will take the system settings. It's also worth noting that the POP3-SSL connection in Mail.app is also blocked after a failure HTTPS connection.
    Currently the ONLY valid solution is using FireFox instead.

  • Itunes ''not responding'' when iphone connected

    Hi
    I have had an iphone 3g for 12 months and has been fine until very recently.
    Whenever i connect it to itunes now it crashes itunes almost immediately. I have updated itunes but it hasnt solved it. It seems to charge the phone but just crashes itunes.as soon as i disconnect the cable itunes runs fine. however i have another iphone cable which i tried and it seemed to solve the problem but this solution only lasted about a week before the same thing occured. I have sinced purchased a new cable on the off chance and it still dosnt help?????
    any advice

    They sometimes get corrupted on the phone, thus can cause the problem you experienced. The suggestion to reinstall itunes was done first because we always want to try and preserve data. Since that didn't work, we start to look at potential data problems. Glad we got it worked out.
    You're welcome.

  • Ipad not found when connected to laptop

    Ipad not found when I connected to laptop and itunes

    iOS: Device not recognized in iTunes for OS X
    iOS: Device not recognized in iTunes for Windows

  • My ipad wont respond when i plug a charger into it

    So about a week ago my ipad wouldent respond when i connected the wall charger to it, But if i turn the ipad fully off and leave it over night it would charge to 100% but then run out of battery fast, ive updated my ipad and the update said it would fix a battery life bug but nothing seems to have happend...last night it was at about 56% and then it randomly started charging again and then stopped at 58%'i dont know what i did but all i know is that the ipad charger still works and the cable still works, any ideas?!?

    Correct, as most computers do not supply sufficient current. It may charge, but very, very slowly. It would be best to use the included power supply.

  • With ios 8.3 ipad mini apps sometimes do not respond when touched

    a new problem occurred with ios 8.3 ipad mini applications sometimes do not respond when touched Fix it in ios 8.4

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • My music will not synk when I connect to my Ipad

    My new music will not synk when i connect my Ipod

    Hi!
    when you connect your iPad to iTunes an iPad tab was appear in left (iTunes 10 or older) or on top right (iTunes 11):
    1) In Bottom of this page you have an option to sync "Only checked songs". turn it off if you don't check your files in library.
    2) Check the Music tab sttings on this page (included albums for sync).
    3) Check the free space on your device!

  • HT2305 My windows 8 laptop not recognising when I connect my iPad

    My windows 8 laptop not recognising when I connect my iPad

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • My ipad will not charge when i connect it to my computer.

    My ipad will not charge when i connect it to my computer.  It will sync but it states "Not Charging" next to the battery icon.  It will chrage when I plug it into a wall outlet driectly.

    The USB port on your computer does not provide enough power oto charge your iPad. This is normal. Charge it by plugging into a wall outlet.

  • My Ipad is not charging when I connect it to my laptop, how can I proceed?

    My Ipad is not charging when I connect it to my laptop or desktop. What should I do? Thanks for your advices!

    My iPad 2 charges when connected to my MacBook Pro.
    http://www.apple.com/batteries/ipad.html
    The quickest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode. Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.

  • Server not responding when connected to Internet

    ServerSere ever not responding when connected to internet

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You may have to re enter your Wi-Fi password.
    If nothing above has helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections
    iOS: Wi-Fi settings grayed out or dim

  • Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

    I am running
    Windows 7 64 bit
    Access 2010 32 bit
    Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

    I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
    Then again, if the form has several subforms they might be slowing up the loading time.
    Bill Mosca
    www.thatlldoit.com
    http://tech.groups.yahoo.com/group/MS_Access_Professionals

Maybe you are looking for

  • IPhoto 6.0 and IMovie6.0 no audio and audio effects

    IPhoto I can't hear any audio in the slide show (Music from ITunes or Demo Songs Garage Band) for exampels or when i add the Music to a slide Show. IMovie In IMovie i can't hear after the import of a film from JVC over Fire Wire the audio and then is

  • Not all tracks of a CD show that are imported

    I have imported Maroon 5's CD - "Hands All Over" - twice now into iTunes.  There is a track (track 12) called "Moves Like Jagger".  Both times only 11 tracks show on the album view, but in song view I can see the 12th track.  Any idea why it doesn't

  • Olympus E5 and PSE9

    I have recently installed PSE9 and also successfully downloaded RAW 6.3..............which is suitable for my Olympus E5 camera. Whilst I am able to open a RAW image in PSE9 from the folder on my desktop, I am unable to open any RAW images in Adobe B

  • Way to Offset Path that doesn't suck, please

    The current Offset Path method is laborious. Can't we get a dynamic way to offset path instead of entering a number in a dialog box? I can't speak for everyone but I simply can't imagine what effect .015 would have on offsetting a path. I wouldn't ev

  • I am running Mac OSX 10.10 -- is this system compatible with CS3?

    I am running Mac OSX 10.10 -- is this system compatible with CS3?