HT4097 Terms and Conditions button will not respond after recovery and restore of ipad

I have recovered and restored my ipad, set up wifi, discovery etc, moved to Terms and Conditions and can get no further.  Agree and disagree buttons appear but will not function.  I can go back so it isnt a frozen screen.  I have scrolled through all T&Cs and even emailed them.  Still stumped.  PLease Heeeellllllpppppp!!!

Thanks for the suggestion.  Had tried that, and just did again.  Still the same.  Have tried plugging it in to itunes as suggested elsewhere - Agree button still will not respond.  Went on to itunes to download an app - wasnt asked to agree to conditions.  I just don't get it......

Similar Messages

  • HT4623 when trying to do an update for settings I had to change my password. I am now stuck on 'Terms and conditions' it will not let me 'agree' and has locked my Tablet. Pleas help

    When trying to do an update for Settings on my iPad I had to change my password.  Having done that I am now stuck at 'Terms and Conditions  My iPad is locked down it will not let me 'agree' and I can't get out of the procedure.
    Please help/
    Kath

    Reset iPad and continue with update
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My home and power button is not responding after I deleted an app from my settings. Can anyone help?

    I went to update my iPhone 4 to the new iOS 7 but needed to create some space. After deleting a couple of apps, my home and power buttons now aren't responding.
    Has this happened to anyone else before? I've read that a back up and restore might help.
    Any advice would be greatly appreciated.
    Thanks, Claire

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • Buttons will not respond

    I've had my 5th gen iPod for a loong time and I've had the occasional issue, but nothing that a reset wouldn't fix.  I went to go use it today and the buttons will not respond.  No lighting up when I touch the wheel, no play, won't even let me reset it.  I've plugged it into the charger, hooked it to the computer and restored it.  Nada. Zip. Zilch.
    Any suggestions or links to other threads with fixes?

    ideas?

  • After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

    After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

    After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.

  • HT3529 I receive messages on my iPad, but I cannot send a reply. The send button will not respond to my touch.

    I receive messages on my iPad, but I cannot send a reply. The send button will not respond to my touch.

    It's not that you can't use the subject field, but it is very unreliable when I try to use it. Sometimes the message send button will work and sometimes it won't.
    But the biggest reason to turn it off is so that you do not accidentally type your message in the subject field. You can type a subject in that field, but you still have to type the actual message in the space below the subject field.

  • IPad 2 - did an erase and reset and now it will not respond

    I did an erase and reset on my iPad 2 and now it will not respond, not even by plugging it in to a computer.
    I attempted to do this last night before 10pm and it is after 1pm and is still "cycling".  (The little circle in the middle of a black screen that just goes round and round)
    I've tried to power off with side and front buttons and I have plugged it into the computer as well.  Computer is not recognizing it is even there.
    HELP!

    Powering Off by using the two buttons? Did you reboot it this way?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Safari: Will NOT Open and Menu Bar will NOT Respond to input

    Safari: When opening Safari it sticks on Top Sites, Menu Bar will NOT respond to inputs and wheel spins indefiantly.  Can someone assist? (I am using OS X Lion 10.7.5 on Macbook Pro)

    If you updated to 6.1 & the problems began then - you might have Glims installed...
    How do I uninstall Glims? | www.MacHangout.com
    If not, test briefly in a new or Guest user account on your computer.

  • 09 I Mac goes asleep ends up with a spinning disk on the screen and the mac will not respond has to be rebooted

    09 I Mac goes asleep ends up with a spinning disk on the screen and the mac will not respond has to be rebooted

    First this:
    In EnergySaver deselect "put the hard disk to sleep when possible". You must logout after the setting to make this effective.
    This probably will not solve it, but let it be deselected.
    When the issue is still there:
    Open Terminal;
    copy/paste following command (after every command hit "enter" key)
    pmset -g | grep hibernatemode
    when the answer is not 3 write it down;
    then copy/paste following command
    sudo pmset -a hibernatemode 0
    reboot
    Open Terminal;
    copy/paste following command
    sudo rm /var/vm/sleepimage
    after that type EXIT in Terminal and close Terminal.
    This does following for you:
    it will set the hibernatemode to zero: the sleepimage (a copy of the complete ram) will not be written and the space on the HD is freed up.
    This sleepimage does not do anything for you but taking time at sleep/hibernate and startup. It is an old remnant of earlier days.

  • Lost my iPad and when I attempt to use the "LOST" feature in icloud, the NEXT and CANCEL buttons are not responding.  I have tried this on 3 different windows based computers.  Any ideas???

    When using icloud because I lost my ipad...when i attempt to use the "LOST" feature the "next" and "cancel" buttons do not respond.  I have attempted this on 3 different windows based computers on 3 different networks.  Any ideas? 

    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
     Cheers, Tom

  • My iPhone power button will not respond?

    My Iphone 3g power button will not respond to when I touch it.

    Sounds like there is a hardware problem with the button.

  • Have a Canon MX860 and the magenta will not print after several deep cleanings

    Have a Canon MX860 and the magenta will not print after several deep cleanings

    Hello allenaeifert.
    Unfortunately, if the issue persists after deep cleanings have been performed, we would have to advise that you contact our support group at 1-800-OKCANON for additional assistance with this issue.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I updated to IOS 7 on my Ipad 2 and now videos will not play, they freeze and skip and will not play.

    I updated to IOS 7 on my Ipad 2 and now videos will not play, they freeze and skip and will not play.  Can anyone help?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    How much Available storage space do you have?
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
     Cheers, Tom

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

    I'm having a very similar issue, paired with iTunes not being able to get online.
    iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
    Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.    

Maybe you are looking for

  • Using macbook air in clamshell mode

    I have a MBA running Lion, and when I try to use it in clamshell mode, the screen on the external monitor doesn't do anything. There is a Logitech USB keyboard and mouse plugged in, but nothing happens when I move the mouse or type on the keyboard wh

  • Quicktime file won't play in my pc

    I made a HD movie on my G5 and export with no compression to a mov file to play in a PC,the mov file size is 3,1gb. I burn a data-dvd with the file in the Toaster. Any PC that I try to use the file, to copy or play, doesn't work because its show 1,99

  • Z2 Tablet LTE - 2 questions?!

    basically I bought a Z2 LTE Tablet 2nd hand from my local cash converters, will this be under warranty if something breaks? and: I have android L on my device, 5.0.2 but according to your site: Latest available software: 23.1.A.1.28 there's a new upd

  • Key date problem

    Hi Friends, I want to create the routing for material.but i have one problem. when i create the routing for material on the intial screen of the routing one option is there . ie KEY DATE. the system shows automatically 02.02.2006. but iwant to create

  • Update to 10.6.7, system random shutdown at mbp mc721.

    I check the graphic card setting in gfxCardstatus. System will be random shutdown by using ATI6490, but force to use intel HD 3000 not so.