HT4097 Upgrade changed my ipad2 to spainish in App Store help me to change back to english
Also changed iTunes into spainish
Go to the App Store, and tap the featured tab. Swipe down to the bottom and tap on your Apple ID. Tap View Apple ID. Enter your password. Go down to Country/Region. Change it there.
Similar Messages
-
I switched my keyboard to french and now it won't change back to english. Quite the hassle when trying to write in english. Why would it be stuck?
When the keyboard pops up, tab the Globe icon, and select the English keyboard.
-
I am running 10.7.5 on an imac and I want to upgrade to Yosemite but I have no app store on my computer. Is there a way I can get the app store on my imac?
If you don't have it then you will have to reinstall Lion:
Reinstall Lion, Mountain Lion, Mavericks or Yosemite without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, Mavericks, or Yosemite
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.
Then you can download and install Yosemite if your computer meets the system requirements:
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite - System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
After upgrading to OS 10.8, my Mac App Store is not working. It says: Cannot Connect To The App Store. Kindly Help
Also having that problem - I checked and I am connected to internet (can access other websites or other pages in Apple's website), can login from Snow Leopard (10.6.8) with Mac App Store there, but if I use the (external) drive with ML to start up, no go.
I can get to the "Featured"/initial MAS page, and tried going to the login from there, but same problem as Mitoshacer.
In my case, MacBook Pro (2.66GHz, 8GB RAM, 500GB external with ML - vs. 320GB internal drive with 10.6.8), March/April 2009 model. Have done searches for the problem online, but nothing shows up (except some for older OS X versions). -
Since iOS7 on iPad2. Updates in App store cannot detect any updates.
Since iOS7 on iPad2. Updates in App store cannot detect any updates so i restart an iPad then it can detect many updates. After use for a few days it happens again.
Unable to connect to iTune Store:
1. Make sure internet is working
2. Make sure iPad is using the latest software
3. Settings>General>Date and Time>Set Automatically>On
4. Make sure Time Zone is correct
5. Try restart iPad -
Accidentally changed nano 6th generation from English to Chinese.how do I change back to english
AAccidentally changed 6th gen.nano to Chinese.how do I change back to English ?
Click here and follow the instructions.
(112138) -
Hi I have just upgraded my macbook to Maverick, but the Apps store doesn't connect to the dutch store/ apps, and I can't see my previous purchased apps as on my iPad, any idea ? thanks
Are you expecting to see the apps that you can see on the iPad, on the Mac?
iOS apps which run on your iPad and use the iOS operating system, won't run on your Mac, which usues a different operating system, OS X. -
My CQ is is non english laguage- how do I change back to english?.
My CQ is is non english laguage- how do I change back to english?.
Go to User through user admin -> user -> preference -> change language
Yogesh -
My Ipad2 has messages in App Store that says I have 22 updates. When I chose to update any of those 22 I receive this message "Cannot Connect to Itunes Store". I am able to make new purchase or free downloads but no updates.
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
After upgrading to mavericks, i cannot open mac app store, preview, calendar, etc
Why i cannot open mac app store, preview, calendar, software update, etc after upgrading to mavericks? How can i fix this? please help me
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Language change back to english!!!!!
A funny friend of mine changed my language to hebrew or arabic can't reall identify which.When I go into options the first thing I see is auto text ...the order is not the same and as I click into each heading I cannot find the option to change backI haven't backuped in some time now.
Is there a way to convert back?
PLEASE help
Solved!
Go to Solution.Here's a long shot from Google. Language in arabic is symbol. Hope this helps!
لغة
This might be better: لسان, لهجة, لغة, أسلوب
Message Edited by Bifocals on 08-10-2008 06:05 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Only getting french unable to access menu to change back to english
only getting french on opening apple tv unable to access menu ? to change back to english
Hi Adeline,
1) Can you see the Menu? Or is everything greyed out?
2) Adobe Reader 7.0.8 is suggested to use for the end users. We had a lot of problems with older releases. Please note that in case of Netweaver 2004 you cannot use Reader 8 or higher yet. Adobe and SAP are working on this issue. (The ACF - Active Component Framework) cannot install properly with Reader 8.
So the only fix is using Reader 7.0.8. - The problem is client side related, not ADS or PCR related.
Cheers,
Noë -
Change back to english interface
hi
i not sure why my dreamweaver interface become other language
i cant read it at all.
may i know how to change it back to english version ?Removing zh_TW.lproj or zh_CN.lproj(depending on your location)located in iTunes\*.Resources will force iTunes to use English interface.
For a permanent solution, go to Control Panel->Regional and Language Options and switch the settings to English-speaking countries. -
I can not open aperture databases anymore as osx10.9 keeps telling me i have opened it with a newer version, which i have not but i understand from other discussions that thru the upgrade of iphoto osx automatically thinks that you have opened with aperture 3.5. the app store does not show me the update as i have not purchased the program thru the app store but on dvd. what to do?
If you are running MacOS X 10.9 and Aperture is installed in your Applications folder and simply called Aperture, not Apertre 3 or something, the AppStore should be showing you the update.
Have you already updated to Aperture 3.4.5 from the Support page Aperture 3.4.5?
Try to update manually to 3.4.5 and then reboot and sign again into the AppStore with your AppleID and look at the Update page.
For some forum members it helped to set the main system language to English U.S. to make the update finally show.
Léonie -
My ipad2 defaults to Malaysian App Store but I have a uk account.
How can I change default App Store to uk one?
KDinKL wrote:
I am signed in with my UK account but still the App Store is Malaysia and tells me to switch to install apps, but I cannot see how to switch!
From the Link posted above...
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
Maybe you are looking for
-
Dear Friends, 1.When i try to download ALV report to excel it is not downloading the logo to the excel sheet. 2.I want my logo in the left side of the ALV. Please suggest. Thanks in advance
-
Different Spatial Features in same layer.
Hi, I'm going storing some spatial data in oracle, all the data is of the same type(same attribution) just some are represented by points and some are represented by polygons. My inclination is that all the data should be held in the same table as I
-
For the first time (I've had iTunes and an iPod for a long time), I'm getting an error message when I sync my iPod that says that "[s]ome of the items in the iTunes library...were not copied to [my iPod] because you are not authorized to play them on
-
I can't get on facetime. It says there is there is a connection error, and I have tried all the troubleshooting.
-
What NI Stepper Drive is compatible with both NEMA 11 and NEMA 42 stepper motors?
I have a NI PXI-7350(Motion Controller), a NI UMI7774 (Universal Interface), and a NI P70530(Stepper Drive) and I tried linking up a new NEMA 11 stepper motor linear actuator from Hayden Kirk and kept getting a constant red blinking light on the driv