HT4098 having trouble to download clear image from i tune

Dear Sir/ Madam,
I have trouble to dowload March issue Living etc magazine.I have dowloaded the magaine but having problem to show clear image in my I-pad. I don't have problem in other issue. Can you help above.
Regards
Eric Cheng

Contact iTunes support. They will probably let you down load it again.

Similar Messages

  • I'm having troubles converting my raw files from Nikon D5200 (NEF) to DNG. I tried using Lightroom 4, but it didn't identify the folder containing the files. So i downloaded the latest DNG converter but that too didn't identify the files kept in the folde

    I'm having troubles converting my raw files from Nikon D5200 (NEF) to DNG. I tried using Lightroom 4, but it didn't identify the folder containing the files. So i downloaded the latest DNG converter but that too didn't identify the files kept in the folder location. So I downloaded DNG converter v7.3 for D5200. It identifies the folder and files; but it is giving me parsing error on trying to convert files. I'm running Windows Vista Home Edition SP1. Kindly advise. Thank you.

    I probably missed this detail in what you’ve posted, but do you see the thumbnails of the three cameras’ raw files in Finder if you don’t convert to DNG?
    What has happened in the past is that the Apple raw interpreter doesn’t read thumbnails of DNGs it doesn’t like, where at least one thing it didn’t used to like was embedded lens corrections for mirrorless cameras.  Are the Olympus and Panasonic mirrorless—meaning there is no optical viewfinder and everything is seen on an LCD screen or perhaps an electronic view finder?  If so the reason these are different is that the camera is doing the lens distortion corrections automatically and this information is stored in the raw files and in the DNGs but Apple doesn’t know how to use these embedded lens corrections or doesn’t know how to read the newer DNG spec that does allow for this information to be embedded in the DNG, at least.
    Apple could just extract the embedded jpg preview and ignore the other parts of the file it doesn’t understand, but it apparently doesn’t do this.
    What I’m not sure about is if the Apple raw interpreter still has this problem or if you’re on an older system without the latest updates for camera raw decoding by Apple.

  • I am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

    i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

    Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
    Tom Wolsky
    Re: How to import 60p footage 
    Aug 17, 2011 12:40 PM (in response to ptburnett68)
    Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo

  • HT1386 having trouble syncing/downloading contacts & calendar & tasks from outlook 2010 to iphone4s help please.

    having trouble syncing/downloading contacts & calendar & tasks from outlook 2010 to iphone4s help please.

    I had the identical problem.  I still don't know how to sync the tasks, but here's how I did the contacts and calendar:
    1.  Connect the 4s to the computer.
    2.  Open iTunes.
    3.  Click the iPhone box in the upper right corner.
    4.  Click on the info tab.
    5.  Hit the checkbox Sync Contacts with... and choose Outlook from the dropdown box.
    6.  Ditto for Calendars.
    7.  Hit Apply.
    My problem was that originally, I wasn't getting the checkboxes.  I turned off the iCloud settings on the 4s.  That did the trick.

  • I use an iMac 10.6.8 with iPhoto '09 to download digital images from Canon DSLRs. Until the last two weeks there has been no trouble whatever importing images by  a USB connection from either camera to the Mac. Now the process will not kick in. Any ideas?

    I use an Mac OSX 10.6.8 with iPhoto 09 to download digital images from two Canon DSLRs. Until the last week, there has been no problem whatever in launching the import procedure once the USB connection has been connected and the camera switched on. Now the process will not kick in at all for either camera.  I can't find a solution through iPhoto help or from other sources.
    Any ideas to fix?  (I admit I have not tested the USB cable at this time).

    What does "kick in" mean?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • I am having trouble opening .nef raw files from a nikon d800 in elements 9.

    I am having trouble opening .nef raw files from a nikon d800 in elements 9.
    I have tried to update ACR to the latest version but can not tell if this has been successful
    I just get the message "wrong type of file"

    For the D800 you have two alternatives:
    (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.3
    Mac download click here DNG Converter 7.3
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Hello.  May I ask:  I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files.  Each page is formatted to A4 size, portrait.  But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.

    Hello.  May I ask:  I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files.  Each page is formatted to A4 size, portrait.  But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.  I cannot seem to find any controls to adjust this.  Any advice appreciated.

    Thanks CtDave, for the further info.  Unfortunately, those suggestions are not working, which is strange.
    ....Until last week, I used to make multi-page PDFs straight from Photoshop: File > Automate > Make PDF.  One simply choses the files, orders them, and creates a PDF.  (Resolution doesn't matter; 300 DPI is no problem.)  However, my new Photoshop CS5 does not have the option in Automate.
    What I've done, seeing as Acrobat is letting me down, is use Bridge (new to me) to create the PDF.  It worked without a problem, but seems like more work than the old PS method.  I will download a newer version of Acrobat to see if that makes any difference.
    .....Also, thanks Test Screen Name:  I agree with you that jpeg is irrelevant, and that one can make a PDF from Photoshop (Print > Save As - pdf).  But that only works for SINGLE PAGE pdf, not multiple pages as far as I can tell.
    Kind regards,
    Prince Nuada

  • I am having trouble with the Canon Image browser ex.l

    i am having trouble with the canon image browser ex.After sevearl downloads i eventually got past the 80% mark.it is now downloaded.however as soon as I click on it it opens up and then a message comnes upm saying that there is a problem and windows is searching for the problem.it then closes the oprogramme down..Any help would be appreciated 

    I am having the same problem and have contacted Canon, they've answered me several times with things to try but nothing they've told me to try helps. It looks like they are going shrug, scratch their heads soon and  pass the buck to Microsoft or HP my comp make .
    I have a Windows 8.1 OS, 64 bit comp.

  • I just upgraded to Lightroom CC5 from 4, and the card will only download 1 image from my recent shoot of 10 images. Why can't I see the other images?

    Lightroom 5 will only download one image from my card, when I shot 10. Iphoto doesn't have a problem with it. I never had this problem with Lightroom 4.

    Sort by capture time and the images won't be "scattered all over the place".
    Just show "NEW" photos in the import.
    As Jim said, reformat your card after all your backups are done and verified.

  • I want to download an image from the url and image is in byte format

    hi
    i want to download an image from the url
    http://www.tidelinesonline.com/mobile/j2me_v1?reqType=imageJoin&imageCount=1&month=1&day=1&year=2008&id=1&imageWidth=230&imageHeight=216&imageDepth=8&imageUnits=feet&imageType=JPG&msisdn=456
    first 5 digits will be the length of the image,we need to download except first 5 digits and display an image file
    i need to finish this today
    pla reply if any body knows solution for this.
    thanks in advance
    Mraj

    You do not need to do anything - iPhoto always keeps the original and you can revert to it at any time
    If you want to be able to see the original and the cropped version in iPhoto at the same time duplicate the photo (this does not really duplicate but simply starts a new edit stream for the photo - command-d) and crop the duplicate
    LN

  • Guys im having trouble in download ipad software for my ipad it stops at 200mb

    Guys im having trouble in download ipad software for my ipad it stops at 200mb
    Is there anyone know how to fix this reply fast plss??????????

    Do you have a max download limit with your Internet Service Provider?

  • AP unable to download the image from 5508 WLC

    Hi,
    I have a 5508 WLC connected to 2950 Switch and the LAP 1262 connected to the same default VLAN. My AP's are able to join the controller since they are in the same broadcast domain but They are NOT able to download the image from WLC. When I am looking at the wireless TAB of WLC.. it says... Downloading Image.
    Can anyone pls. suggest what all needs to be done to make UP the APs. Also, Following is the error i am seeing at the AP.
    *Apr 27 11:48:40.640: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.99:5246
    *Apr 27 11:48:40.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 27 11:48:40.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 27 11:48:40.694: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout
    *Apr 27 11:48:40.700: capwap_image_proc: problem extracting tar file
    *Apr 27 11:48:40.700: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
    *Apr 27 11:48:51.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.99 peer_port: 5246
    *Apr 27 11:48:51.000: %CAPWAP-5-CHANGED: CAPWAP changed state to 
    *Apr 27 11:48:51.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.99 peer_port: 5246
    *Apr 27 11:48:51.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99
    *Apr 27 11:48:51.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    examining image...
    *Apr 27 11:48:56.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99perform archive download capwap:/ap3g1 tar file
    *Apr 27 11:48:56.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
    *Apr 27 11:48:56.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
    *Apr 27 11:48:56.589: Loading file /ap3g1...
    logging facility kern
            ^
    % Invalid input detected at '^' marker.
    %Error opening flash:/update/info (No such file or directory)
    ERROR: Image is not a valid IOS image archive.
    archive download: takes 48 seconds
    *Apr 27 11:49:44.640: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.99:5246
    *Apr 27 11:49:44.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 27 11:49:44.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 27 11:49:44.694: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout
    *Apr 27 11:49:44.700: capwap_image_proc: problem extracting tar file
    *Apr 27 11:49:44.700: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
    *Apr 27 11:49:54.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.99 peer_port: 5246
    *Apr 27 11:49:54.000: %CAPWAP-5-CHANGED: CAPWAP changed state to 
    *Apr 27 11:49:54.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.99 peer_port: 5246
    *Apr 27 11:49:54.572: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99
    *Apr 27 11:49:54.572: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    examining image...
    *Apr 27 11:49:59.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99perform archive download capwap:/ap3g1 tar file
    *Apr 27 11:49:59.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
    *Apr 27 11:49:59.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
    *Apr 27 11:49:59.589: Loading file /ap3g1...
    logging facility kern
            ^
    % Invalid input detected at '^' marker.
    %Error opening flash:/update/info (No such file or directory)
    ERROR: Image is not a valid IOS image archive.
    archive download: takes 48 seconds
    *Apr 27 11:50:47.644: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.99:5246
    *Apr 27 11:50:47.644: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 27 11:50:47.644: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 27 11:50:47.697: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout
    *Apr 27 11:50:47.697: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
    *Apr 27 11:50:47.703: capwap_image_proc: problem extracting tar file
    *Apr 27 11:50:57.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.99 peer_port: 5246
    *Apr 27 11:50:57.000: %CAPWAP-5-CHANGED: CAPWAP changed state to 
    *Apr 27 11:50:57.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.99 peer_port: 5246
    *Apr 27 11:50:57.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99
    *Apr 27 11:50:57.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    examining image...
    *Apr 27 11:51:02.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99perform archive download capwap:/ap3g1 tar file
    *Apr 27 11:51:02.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
    *Apr 27 11:51:02.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
    *Apr 27 11:51:02.589: Loading file /ap3g1...
    logging facility kern
            ^
    % Invalid input detected at '^' marker.
    %Error opening flash:/update/info (No such file or directory)
    ERROR: Image is not a valid IOS image archive.
    archive download: takes 48 seconds
    *Apr 27 11:51:50.640: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.99:5246
    *Apr 27 11:51:50.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 27 11:51:50.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 27 11:51:50.694: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout
    *Apr 27 11:51:50.700: capwap_image_proc: problem extracting tar file
    *Apr 27 11:51:50.700: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
    *Apr 27 11:52:00.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.99 peer_port: 5246
    *Apr 27 11:52:00.000: %CAPWAP-5-CHANGED: CAPWAP changed state to 
    *Apr 27 11:52:00.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.99 peer_port: 5246
    *Apr 27 11:52:00.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99
    *Apr 27 11:52:00.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    examining image...
    *Apr 27 11:52:05.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99perform archive download capwap:/ap3g1 tar file
    *Apr 27 11:52:05.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
    *Apr 27 11:52:05.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
    *Apr 27 11:52:05.589: Loading file /ap3g1...
    logging facility kern

    hi amjad,i am working on the same controller and i upload the image to another AP and cponvert it to LAP. bot this is not registering on controller and behaves like first as first ap is registered and working fine. 2nd ap console output is given below
    %Error opening flash:/update/info (No such file or directory)
    ERROR: Image is not a valid IOS image archive.
    archive download: takes 48 seconds
    *Apr 29 10:16:29.644: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192
    .168.1.59:5246
    *Apr 29 10:16:29.644: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 29 10:16:29.647: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 29 10:16:29.707: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout
    *Apr 29 10:16:29.713: capwap_image_proc: problem extracting tar file
    *Apr 29 10:16:29.713: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
    not established.
    *Apr 29 10:16:40.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
    p: 192.168.1.59 peer_port: 5246
    *Apr 29 10:16:40.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *Apr 29 10:16:40.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
    peer_ip: 192.168.1.59 peer_port: 5246
    *Apr 29 10:16:40.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.59
    *Apr 29 10:16:40.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    examining image...
    *Apr 29 10:16:45.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.59pe
    rform archive download capwap:/ap3g1 tar file
    *Apr 29 10:16:45.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Do
    wnloading image from Controller.
    *Apr 29 10:16:45.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
    *Apr 29 10:16:45.589: Loading file /ap3g1...
    logging facility kern
            ^
    % Invalid input detected at '^' marker.
    %Error opening flash:/update/info (No such file or directory)
    ERROR: Image is not a valid IOS image archive.
    archive download: takes 48 seconds
    *Apr 29 10:17:33.647: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192
    .168.1.59:5246
    *Apr 29 10:17:33.647: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 29 10:17:33.650: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 29 10:17:33.710: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout
    *Apr 29 10:17:33.716: capwap_image_proc: problem extracting tar file
    *Apr 29 10:17:33.716: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
    not established.
    *Apr 29 10:17:43.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
    p: 192.168.1.59 peer_port: 5246
    *Apr 29 10:17:43.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
    *Apr 29 10:17:43.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
    peer_ip: 192.168.1.59 peer_port: 5246
    *Apr 29 10:17:43.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.59
    *Apr 29 10:17:43.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    examining image...
    *Apr 29 10:17:48.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.59pe
    rform archive download capwap:/ap3g1 tar file
    *Apr 29 10:17:48.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Do
    wnloading image from Controller.
    *Apr 29 10:17:48.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
    *Apr 29 10:17:48.589: Loading file /ap3g1...
    logging facility kern
            ^
    % Invalid input detected at '^' marker.
    %Error opening flash:/update/info (No such file or directory)
    ERROR: Image is not a valid IOS image archive.
    archive download: takes 48 seconds
    *Apr 29 10:18:36.647: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192
    .168.1.59:5246
    *Apr 29 10:18:36.650: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 29 10:18:36.650: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Apr 29 10:18:36.710: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout
    *Apr 29 10:18:36.716: capwap_image_proc: problem extracting tar file
    *Apr 29 10:18:36.716: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
    not established.
    *Apr 29 10:18:46.000: %CAPWAP-5-DTLSRE
    pls help

  • I'm unable to download raw images from my canon 70D to elements 12.?

    I'm unable to download raw images from my canon 70D to PH elements 12, downloaded camera raw 8.2 as I saw in a discussion but still unable to convert images.  In the "select images" window the images are soft and cannot be selected.  What am I doing wrong? Any help?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • How to download RAW images from Canon S100 to iPhoto?

    How to download RAW images from Canon S100 to iPhoto?

    You need the Raw compatibility update 3.9:
    http://support.apple.com/kb/DL1473

  • I am having trouble do upload my songs from cd to icloud(I Match).

    Hi. I am having trouble to upload the songs from my cd to I Cloud(IMatch). I´ve got to upload the all the songs that were in my Itunes. But now, when I transfer the songs from cd to I Tunes, I can´t upload them to I Cloud(I Match) anymore.

    I've done that and it doesn't transfer the apps or tones
    It actually says I'm not on an authorized computer.....so I make sure I am authorized and signed in correctly......and nothing

Maybe you are looking for

  • WLC 5508 HA-SSO 90-day timer

    Hello everybody We have 2 5508 in HA SSO (212licenses + 50permanentfor the secondary) it is not clear what is written in the documentations about the 90-day timer  – If the new WLC has a higher AP count than the previous, the 90-day counter is reset.

  • Need Help with the General Understanding WebUtil's Configuration

    We resently installed the following software so that we could migrate our 6i client-server forms to 10g web forms: 1) Oracle Developer Suite 10.1.2.0.2 for Windows (B24499-01, B24500-01) 2) Oracle Oracle Application Server Forms and Reports Services

  • Async to Sync Scenario

    Hi Experts, I am doing async JDBC to sync webservice scenario. I did create async interface for JDBC and sync interface for webservice. my scenario is i just want to see the response from webservice in XI for trouble shoot, i dont need to send the re

  • Mapping of repeating structure to nested structure

    Hi I have a mapping issue. My Data type look like this MT_RcicRecords -TRNH  1-1 -RECH  0-Unb -RECL  0-Unb -ENDT  0-Unb -TRLR  1-1 In above structure pattern of RECH, RECL and ENDT can occur multiple type. My output after File content conversion look

  • Not Prompting for Parameters in .jsp page

    Post Author: montgomm CA Forum: General We have defined an input parameter to our report and it will successfully prompt for the input parameter within the designer preview.  However, once we build a .jsp page to contain the report and load it to our