HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?

No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
I've loaded thousands of photos on my IPad and never have had that problem.
Don't blame a moment of carelessness on your device.
If you want to make such a suggestion to Apple use http://apple.com/feedback

Similar Messages

I have an iphone 4 with videos on it that I'd like to transfer to an IMac so that I can email them. (the iphone isn't in use anymore.) What's the procedure for transfering videos from an iphone to an iMac?

I have an iphone 4 with videos on it that I'd like to transfer to an IMac so that I can email them. (the iphone isn't in use anymore.) What's the procedure for transfering videos from an iphone to an iMac?

Connect the iPhone to your Mac with its USB cable and launch iPhoto. In iPhoto you can select which files to upload into the library. Once in the library export them out of iPhoto to a folder on the Desktop via File ➙ Export ➙ File Export with Kind=Original. That will give you copies of the videos in the folder for use outside of iPhoto.
If you want to bypass importing into iPhoto try launching Image Capture and manually upload the selected video files to the folder of your choice.
OT

I purchased a MacBook Pro in fall for College and it came with a $100 card. I signed up to redeem but accidentally put the wrong ending on my email and now that I try to do it over it says it has already been redeemed. Help, Please!

I purchased a MacBook Pro in fall 2011 for College and it came with a $100 "Back to School" card. I signed up to redeem but accidentally put the wrong ending on my email and now that I try to do it over it says it has already been redeemed. Help, Please!

- You can only sync an iPod to one iTunes library/computer. You can however, manually manage music and videos among different libraries.
Go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
- If y wnat to switch syncing libraries/computer see:
go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
If all the synced media like music is in the iTunes library of the second computer it is very easy.

I bought a used I pod touch 4, I deleted previous settings, now I just have a screen with a picture of the USB cable and the itunes logo. What do I do?

I bought a used Ipod touch, was supposedly factory refurbished, and it worked when I first used it. Then I noticed the previous owners User ID on the Apple log in and thought i should delete all info and start clean. I hit the delete button, Now all I get on the screen is a picture of the usb cable and above it the itunes logo. What do i do now?

Connect it to your computer, launch iTunes.
Right or control click the iPod under Devices left side of the iTunes window.
Click: Sync
If you want, you can rename the device. Double click the iPod under Devices. Type in a name.

Since updating to iOS5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to restore this feature.

Since updating to iOS 5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to resolve this issue.

There is No Pre-installed Youtube App in iOS 6.
http://itunes.apple.com/app/youtube/id544007664?mt=8

Exact Apple part numbers for original Discs that came with late G5 Quad?

If anyone happens to own a G5 Quad made 2006 and you still have the original Software Restore discs that came with it, I'd be much obliged if you would be kind enough to post the exact Apple part number(s) for said discs.
I have a Power Mac G5 Quad made in the third week of June, 2006, and it is my understanding that it originally came with either Tiger 10.4.2 or Tiger 10.4.4.
I'm very enthusiastic about this machine and very happy with its performance. I'd like to search through the stacks of gray OS discs at local second-hand electronics shops for a matching set of discs. It's more of a curiosity, as I do have retail Tiger and Leopard discs off of which the Quad boots just fine.
Thanks in advance.

Hi Ramon,
I actually have both sets of discs. I have the disc set which came with the G5 Quad I own and its 10.4.2 while I do have another disc set which is 10.4.4 and it has also a OS 9.2.2 disc of its own for classic. When I get home later today I can see what other discs I have.. I will post the part numbers for you when I get home.
Take care..
Romko

BDC for Uploading data from XL sheet with unknown order of fields

Hi SAP Gurus,
My requirement is as follows,
A BDC is to be developed for uploading data from an XL sheet, but the problem here is , the order of fileds in the sheet can be changed .
ie, for example the fields in the XL sheet are :-
matnr    maktx   menge amount
but the user can give as
matnr amount menge maktx
or
maktx   matnr amount menge
how i can solve this problem.
Thanks and Regards,
pavan.

Hi Pavan,
You need to handle it by your self, you can create a dynamic table based on the file value.
The field name pass from file with the record as a header, and based on the header name create your dynamic table.
afterward you can pass your value to BDC.
for creating dynamic table you can use this method
call method cl_alv_table_create=>create_dynamic_table
exporting
   i_style_table             =
    it_fieldcatalog           = it_field[]
   i_length_in_byte          =
importing
    ep_table                  = dyn_tab
   e_style_fname             =
exceptions
    generate_subpool_dir_full = 1
    others                    = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
             with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
-Dhirendra

Suppress standard Tax procedure for tax returned from external tax server

Hi All,
We are facing an issue after implementing the external tax engine called CTE.
In some scenarios, when CTE is returning reverse charge lines, we are passing the same lines into the BAPI for posting.
Ex: We can clearly see that two reverse charge lines (input and output taxes) being returned by CTE.
Now, we pass the tax lines into the BAPI for posting. We get the following:
We can clearly see that apart from the tax lines which have been sent by CTE, we also get two additional lines having +-1000 as amount.
Now, we tried to post the document without passing the tax lines into BAPI and we get,
The additional lines are still there. Thus, I came to the conclusion that these tax lines are being added by SAP standard tax procedure as tax calculation.
Now, since we have already calculated tax using CTE (for some cases specially reverse charge scenario), we do not need SAP standard tax procedure to calculate tax again and add new tax lines to the posted document.
Thus, our main objective is to suppress the standard tax procedure ( like TAXAT, TAXGB, etc) or few of the cases.
We tried to analyze from our end but still could not reach a solution for the same.
Is there any way or any indicator which you can use to suppress the standard tax procedure in case we are using CTE to calculate tax?
Please help.
Regards,
Saurabh.

Hi
You can create and use a new tax code which is applicable only for Delivery charge cases.
Use a new pricing condition type for this Tax .and condition records with access sequence and tax code can be amintianed only for this condition type.
You will have to modify pricing procedure for the same.
Depending on condition records and document inputs the tax values for delivery will get triggered.
You can also put an order reason in Accounting determination access sequence through which on This special sales ,
account determiantion can be changed.
hope this helps
Regards
Mandar

Please help me on a form i push the submit button and all i get is a page with the following code wh

<?php
//--------------------------Set these paramaters--------------------------
// Subject of email sent to you.
$subject = 'Results from Contact form';
// Your email address. This is where the form information will be sent.
$emailadd = '[email protected]';
// Where to redirect after form is processed.
$url = 'http://www.karenwebster.info/confirmation.html';
// Makes all fields required. If set to '1' no field can not be empty. If set to '0' any or all fields can be empty.
$req = '1';
// --------------------------Do not edit below this line--------------------------
$text = "Results from form:\n\n";
$space = ' ';
$line = '
foreach ($_POST as $key => $value)
if ($req == '1')
if ($value == '')
{echo "$key is empty";die;}
$j = strlen($key);
if ($j >= 20)
{echo "Name of form element $key cannot be longer than 20 characters";die;}
$j = 20 - $j;
for ($i = 1; $i <= $j; $i++)
{$space .= ' ';}
$value = str_replace('\n', "$line", $value);
$conc = "{$key}:$space{$value}$line";
$text .= $conc;
$space = ' ';
mail($emailadd, $subject, $text, 'From: '.$emailadd.'');
echo '<META HTTP-EQUIV=Refresh CONTENT="0; URL='.$url.'">';
?>
where do i put this and what am imissing

I don't know why but after about an hour the tool bar you rferred to came on its self jsut as the support solution and you have advised and it is now working, but the toolbar just disappears and that is why I could not find the link or correct store link. Weird! But thanks, Gordon

Keep getting error message " insufficient data for an image" on a pdf with a sketch and it strips out the data as well as the sketch

I am running Adobe Reader XI and IE 11 I have tried uninstalling and reinstalling and nothing works . HELP!!!

Hi barton123,
The error you describe was an issue with Acrobat X, but I haven't heard of it happening with Reader XI. Have you installed the most recent Reader update? Please choose Help > Check for Updates and install any updates that are available.
If that doesn't do the trick, it's quite possible that the PDF may be damaged. Do you experience the same error with other PDFs.
I look forward to hearing back from you.
Best,
Sara

I have Firefox 4 listed as a program, tried to un-install it so I could download 5. Now I cannot use 4, Cannot un-install 4 or Download 5 - What do you think? My stupidity? Or have I discovered a new flaw in the program? Thanks

When I try to un-install 4 it tells be to restart / reboot which I have done and nothing changes.
The same happens when I try to download 5.
Also when I click on the Mozilla / Firefox shortcut on the desktop it just brings up a blank white page.

You don't want to update to 3.6.4, trust me. Stay with 3.6.3. If you need to download it again you can find it here:
http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/win32/en-US/

I just received my iPad mini for christmas and it came with a case with a keyboard and I'm not sure how to get the keyboard to work with the iPad. Please help!

I cant get my ipad minis' keyboard to work how do you connect it?

is it something i need to charge or is it bluetooth powered?

Error when select sheet for Excel file from Excel 2013 with visual basic

Dim AppXL As Object
Dim MyWorkBook as Object
Set AppXL = CreateObject("Excel.Application")
Set MyWorkBook = AppXL.Workbooks.Open("E:\MyFile.xls)
AppXL.Sheets("Sheet1").Select
The above code run with no problem when use in machines with Excel 2007 and Excel 2010.
But when run in machine with Excel 2013, error with "Out of Range" occur. Kindly advise for any solution.
TS Lim

With your highlight on the AppXL.Workbooks.Open, I have solved the problem by re-position the statements.
Below are the 2 situation which works in for Outlook 2007, 2010 and 2013
Situation 1, work for Outlook 2007 and 2010 but d not 2013
With AppXL
Set WorkBookFrom = AppXL.Workbooks.Open("E:\MyFile.xls")
Set WorkBookTo = AppXL.Workbooks.Open("E:\MyFile2.xls")
WorkBookFrom.Activate
.Sheets("Sheet1").Select
.Range("A1:IV65536").Select
.Selection.Copy
WorkBookTo.Activate
.Sheets("Sheet1").Select
.Selection.PasteSpecial Paste:=-4163, Operation:=-4142, SkipBlanks:=False, Transpose:=False
.Range("A1").Select
WorkBookTo.Save
End With
Situation 2, work for Outlook 2007 and 2010 and 2013
With AppXL
Set WorkBookFrom = AppXL.Workbooks.Open("E:\MyFiel.xls")
WorkBookFrom.Activate
.Sheets("Sheet1").Select
.Range("A1:IV65536").Select
.Selection.Copy
Set WorkBookTo = AppXL.Workbooks.Open("E:\MyFile2.xls")
WorkBookTo.Activate
.Sheets("Sheet1").Select
.Range("A1").Select
.Selection.PasteSpecial Paste:=-4163, Operation:=-4142, SkipBlanks:=False, Transpose:=False
WorkBookTo.Save
End With
Thank you for indirectly help me to solve the problem.
TS Lim

Windows Media Player, since installing Firefox 4 I cannot click on a link in my website to play a video. I have gone through the procedure for downloading the new plug in and it still won't play this is the link I downloaded from

http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download
I then shut down firefox and tried again the video is enbeded in my website as an .asx file. It concerns me that others cannot see it either.
It is also a link in my email
It was fine in previous version of firefox

Sorry to hear about your problems. For a long time I and a colleage were having an issue with our MBP's. When we closed the lid, we thought it was going to sleep, then and hour later when you opened it, it would be all hot and the battery was drained etc. Turns out it wouldn't go to sleep. For a while we remedied the problem by going to the apple menu and hitting sleep then shutting the lid, but after some process of elimination, it turned out that a little freeware app called Desktopple that we used in presentations and etc. . . was the culprit. as soon as I took that app off, Both of our machines started sleeping like babies!!!
Morale of the Story! Sometimes it's a 3rd party app causing the problem.
Desktopple worked fine until one of the OSX updates happened, then it started causing this problem. My suggestion is that you disable these small freeware type apps one by one until you find the source of the problem.
I have a hard time believing that you were given 3 lemons in a row. It's gotta be something that your running.

Please provide clear instructions on the procedure for downloading Photoshop Elements 12

Having tried for numerous hours to download my recent purchase of photoshop elements 12 i would appreciate any assistance in the form of clear instructions.

try using a different browser if you're having trouble or if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
and activate with your serial serial number.
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).

HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

Similar Messages

Maybe you are looking for