HT4101 My 2 year old SD connector for the iPad 1 suddenly will not work.

Is it possible that I need to replace it?
I have downloaded around 700 photos.

Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Similar Messages

HT4913 Hello, Have I tunes, need to reset factory settings since I do not have password for the iPad? Will not open devices on itunes

Hello, never used this before but need your help please. When I click devices it does not open. I am using toshiba lap top, vista. Thank you.

Hello,
Try changing the view on iTunes 11 to classic view. To enable the menu bar, press Control-B. To enable the Side Bar, press Control-S. Test to see if you can access the device.
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
If the issue persists and iTunes becomes unresponsive when attempting to access your device, try the steps in the article below.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Cheers,
Jason H.

My iMac is less than one year old. Without warning, the screen suddenly goes black. It used to happen occasionally, but is now happening all the time without warning. What is Apple doing to correct the problem?

My iMac is less than one year old. Without warning, the screen suddenly goes black. It used to happen ocasionally, but now it happens all the time. Numerous people have posted about this issue. Why hasn't Apple solved the issue. For what I paid my computer, I expected more from the product than I have gotten. I was a PC person for years and most of my associates told me that I needed to get a mac...I am starting to regret having taken their advice.

Sorry you're having this problem.
A few years ago we had a similar issue on one of our machines, it was an early MacBook. Ended up being a cracked circuit connection on the motherboard. Changes in temperature caused the crack to expand and contract resulting in a shut-down followed by an automatic reboot. Sometimes over-and-over. I understood from AppleCare at the time that those symptoms could have also been any number of things including a intermittent issue with a powersupply.
If you take it back to the Apple Store at some point, I would ask them to have it run some CPU intensive tasks that closely resemble what you are doing when the screen goes black. It took us several try's to find the problem. Calling AppleCare each time to discuss it and troubleshoot before making the trips to the Apple Store really moved things along. In fact, it wasn't until the Apple Store had cracked the case from the inside that things kicked into a higher gear and AppleCare phone support sent out a pre-paid FedX package to send it to a refurbishing facility. Never a problem since and I know the people who have the machine today.
PS Can identify with the trip to the Apple Store, our closest one is in Knoxville, 2hrs from us.

How do I play a video through a connection to a projector? I have the connector for the iPad.

how do I play a video through a connection to a projector? I have the connector for the iPad.

Good job Chris!
You can also go into iTunes Preferences, select Playback, and check the Play videos: tick box, then select from the following:
in the main window
in a separate window
full screen
C

Ear buds not working. Not due to broken headphones, so it must be the connector in the iPod that is not working.

On my iPod Classic, the right ear bud does not work and the left one spots off and on. The music works fine on a dock, and I know it is not due to broken headphones (a problem I've encountered many times), because they work fine on other iPods, other headphones have the same problem on this iPod, so it must be the connector in the iPod that is not working. Can I fix this myself, do I need to take it in to get it fixed, or do I need a new iPod?

Yes, if you got very steady hands, and you must have the correct tools to open the Ipod. (which is the most difficult part).
For the parts, you can buy off ebay, the audio jack and cable, less than $20 I think.
Those plastic opening tools that they are selling only works for cases that has been opened before, they dont worked for sealed virgin iPod cases.
The screws are quite tiny, so be careful, it might jump out off the window or into the some hole, so better lay white sheets of paper on the floor.
Here is a 4 minute video on how to do it.
http://www.youtube.com/watch?v=ILd9AqzLW60&feature=related

Is there an app for the ipad that will allow you to access your mac.

Is there an app for the ipad that will allow you to access your mac via wifi or cell network.

Yep, two of the most popular apps are "LogMeIn Ignition" and "iTeleport." Check them out, they'll both set you back by about 30$ though.

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

Itunes provides the option for setting the Start and Stop times of each music track. However, the start and stop times do not synchronize to the iPhone. I don't understand why this option is even available as it doesn't work when listening to music on the phone. I have not found another application that will support the start and stop time markets. I have searched quite a bit for this but can't find anything. I hope we can find something.

Is there an App for the iPad that will show my GPS position on a world map, even if I'm at sea?

Is there and App for the iPad that will show mu GPS position on a world map, even if I'm at sea?
Thanks,
Tomac

BobTheFisherman wrote:
GPS will show your position anywhere if your device has unobstructed view of the GPS satellites. The issue is that you must find a maps/charts that include all areas of the sea.
There is no mobile data connection required to use GPS on land or sea. Once again your issue is the availability of downloadable maps/charts for the areas you will be traveling.
Sorry, but you can't install an app like NAVIGON on an iPad without 3G cellular data connection:
copied from NAVIGON app:
...can be installed on any iPhone3GS, iPhone4, iPhone4S, iPhone5 or iPad device (the navigation function is only available on the iPad WiFi+3G)
Can I navigate with my mobile phone?
Answer:In principle yes. For mobile phones there are both Onboardnavigation solutions and Offboardnavigation solutions.
The following requirements must be fulfilled:
•     The software must support the mobile phone. NAVIGON software
      always comes with a compatibility list. The software is guaranteed
      to work only for the mobile phones on this list.
•     The mobile phone must have a GPS receiver. Many new mobile
       phones come with a built-in GPS receiver. Otherwise you can use
       an external GPS receiver which is connected to the mobile phone
       by cable or Bluetooth.
•     It should be noted that an offboard solution incurs costs for using
      the mobile phone network to communicate with the provider's server.
Message was edited by: Ingo2711

Is there a Digital AV HDMI Adapter for the iPad 2(30pin) that works with iOS8?

Is there a Digital AV HDMI Adapter for the iPad 2(30pin) that works with iOS8? I had one that connected my Ipad2 to my tv so I can stream netflix on a TV that does not have the internet. As soon as I updated my iPad to iOS8 it no longer works Help!

You can speak & make notes. Get Dragon Dictation app.
 Cheers, Tom

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.

Pablos1966 wrote:
Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
Why don't you have the original Apple ID? Where did you get the phone?

After downloading the new update ios 6 for the iPad , I can not find the YouTube app

After downloading the new update ios 6 for the iPad , I can not find the YouTube app. Is there a way to get the YouTube app back?

It's now not part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
 Cheers, Tom

My GoFlexPro for Mac external drive will not work and freeze Finder after I switched to Mountain Lion. Anyone same trouble?

My GoFlexPro for Mac external drive will not work and freezes Finder after I switched to Mountain Lion. Anyone same trouble?

Search this site for many reports of problems with GoFlex drives.

Is there a replacement YouTube App for the removal of the native YouTube in iOS 6? There is one for the iPhone/iPod but so far nothing for the iPad. Will this be fixed soon?

Just wondering if there is anything coming out soon. Kind of a big missing chunk from the iPad features list in my opinion. Thanks.

The website version is nowhere near as functional as the original app. It can't even go into fullscreen mode. I hope Google will make a decent version of YouTube for the iPad like they did for the iPhone. Third party apps seem to fall short in terms of software fluidity and features right now.

HT5706 After the update the Apple TV will not work - It puts up a symbol to connect to the Icloud - which I do not have the cable for or know what it means or why - Message do not update if it works

After the update to the Apple TV, it will not work - It puts up a symbol to connect to the Icloud - which I do not have the cable for or know what it means or why -
Message to users is, do not update if it works. This product apparently was not tested very well

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
If when you choose restore you get a message that the device cannot be found, download the file below
Apple TV Software Restore 5.1.1 (2nd generation)
Apple TV Software Restore 5.1.1 (3rd generation)
Then hold down the option key while choosing restore and select the downloaded file when prompted.

HT4101 My 2 year old SD connector for the iPad 1 suddenly will not work.

Similar Messages

Maybe you are looking for