HT4101 When I plug my USB adaptor into my iPad 2 and 3 I get error this accessory is not supported by iPad
I have a apple USB adaptor and I keep getting the error accessory not supported
On the iPads...
1: Make sure the Dock Connectors are Clean and Free of Lint.
2: Try a different Cable.
3: Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Similar Messages
-
So, my phone won't connect to my mac computer when I plug the USB charger into my computer and then into my phone it won't charge or connect. How should I fix this?
Test with another computer and another cable
To discover if the problem is eith the phone the cable or computer -
my niece has locked herself out of her ipod touch. when i plug it into the computer with the usb cable, a message on itunes says i have to enter her passcode. her ipod will not allow me to do so. what next??
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
When I connect the 30 pin digital AV adapter to my iPad 2 I get the above error message. I tried reset/ power recycle etc. No joy!
http://support.apple.com/kb/ht4108
Here is the compatibility chart and Adapter Versions...Althought this,many have problems even with the Official product and the Digital adapter.... -
my iphone I fell to the ground yesterday, from a height of approximately 1 meter. after this I trailed off, now only turns on when I plug the usb but the apple appears and just turn off and turn back, there is nothing more that I recommend doing?
With that behavior you need to take the iPhone to an Apple store genius bar for an out-of-warranty replacement. In the US that is $269 for the iPhone 5.
-
When trying to sing into the Itunes Store I get error message "Itunes store not availble at this time. Please try again later" I've updated everything and doesn't help. Anyone have any ideas?
Send a PM(Private Message) to ATT Uverse Care.
-
I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message. "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?
Hello GuynStPete,
Thanks for using Apple Support Communities.
I found the following support article that has some troubleshooting steps for you to follow in order to resolve this issue you're experiencing:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Take care,
Alex H. -
Connecting my lightning to sd card reader accessoire THE iPad air Lets know' this accessory is not. supported by this iPad' could Someren help solving this issue?
Thanks for the advice. Unfortunately it didn't work. Have tried both kinds of restore. First restoring from backup and second as a new device (twice). Still get the same "Accessory not supported" message. Thank goodness I can use the old 30 pin SD reader with the lightning adaptor for my up-coming trip. I tried it again and it worked again. BUT I hate having a piece of Apple equipment that doesn't work.
-
please help! when i plug my iphone 4s into itunes, it tells me it cant sync and to restore it back to factory settings. how do i do this without losing all of my contact list, music i purchased on my phone, and all the other data and pics? i do have i cloud that recently backed up, but does i cloud back up my contacts to?
i have icloud but does that backup everything thats on my phone currently? even music that i have purchased on my phone thats is on my itunes? pic, contacts, apps?
-
Trying to copy photos in folder on desktop to a flash drive but keep getting error that there is not enough free space when there is. I read to delete trash with the flash drive in but that still doesn't work. Help!!
How is the flash drive formatted? Open Disk Utility (Applications>Utilities) and see how it's formatted - that might be the problem.
Clinton -
Can i plug an usb drive into a iMac and access it with a Macbook pro?
I have an iMac that is less than 3 months old and my wife now has a two week old Macbook Pro.
IMac:
21.5" screen
3.1 quad core i7
16 GB Ram
1 TB Fusion drive
Macbook Pro:
13" screen
3.0 dual core i7
8 GB ram
512 GB Flash storage
Both have Mountain Lion.
Both are running iOS 6.1.2
I would like to attach an external USB hard drive to the iMac and allow the Macbook Pro to be able to have full access to just the external USB hard drive. Either it can't be done or I am just not getting the Sharing settings set correctly. I played around with sharing last night on both machines. When I would plug in a FAT 32 thumb drive into either machine and find it, I would add it to he shared folder but it would only allow me and "Everyone" to have access. I could not change "Everyone" to "No Access" because "Everyone" was greyed out or add my wife. I can access the Macbook Pro as Mark with the iMac but I can only access the iMac from the Macbook Pro as a "Guest".
I am using a Netgear WNR3500L router. I currently have the USB hard drive connected to the router via the Readyshare USB port but it is formatted as NTFS for Windows shared files. This router does not recognize HFS+ formatted hard drives in the USB port. When I move it to the iMac, I will back it up and then reformat it as HFS+. Since the router is about a year old and working fine, I would buy an Airport Extreme or Time Capsule if that is my only choice.
I don't normally turn off the iMac.
I would not want to allow access to any other device.
Since I am very new at Mac's, I would appreciate any help that any of you can offer me.Topher Kessler,
Thanks for commenting to me.
My thumb drive is formatted as Fat 32 so your first paragraph explains what I am seeing.
You are correct that my existing router does not support HFS+. It is visible from my MAC and some file are read only.
The drive that I will be wanting to attach to the iMac would be formatted as HFS+ so it would not be accessible from my router.
So, if I setup sharing (If it is possible) and thern plugged in a USB 3.0 hard drive into my iMac, would it be accessible to my Macbook Pro? If it would not be, it looks like an Airport Extreme or a Time Capsule are my only options?
I see that a Netgear 4500 is Time Machine compatible. Any idea what that means? When I read pages 80 through 82, it appears to me that you format your drive to HFS+ and then eventually plug it into the router usb.
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_08Jul12.pdf
Thanks for your comments. -
i plug the cable into my ipod touch then plug it to the tv, it works for a few seconds but then my ipod tell me that its not supported, what does that mean and what can i do about it?> and is tv out supported with the ipod touch? help please
runs ios 5.0
white ipod touchi am using a cable connector like this one.. it works with audio when pluged into a stereo but not a TV.i am trying to display video from ipod, also from other apps.. i also want to know why it does not work.
i use the video app on the iPod and video stored on other aps. -
I'm still very new to forums so please excuse anything that may have been previously asked. I purchased a USB controller for my mac to play a couple games and the vibrate function on the controller will not stop. I was wondering if there is a way to access the controller setting or if os x supports plug and play controllers? Any help is greatly apprectiated.
Hello Knowledgelink
Go through the steps in the article below to restart your iPhone into recovery mode to then restore your iPhone to the latest version of iOS.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G. -
please can anybody help??!!
Hello EmilyLauren92,
It sounds like your phone is not seen in iTunes on your computer but is recognized in My Computer. You have done an excellent job troubleshooting so far, and next I recommend these steps from the article named:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
4. Empty your Temp directory and restart
7. Remove and reinstall iTunes
9. Update, Reconfigure, Disable, or Remove Security Software
10. Deleting damaged or incorrect registry keys
The title mentions the iPod, but the steps will be relevant for the iPhone as well.
Thank you for using Apple Support Communities.
All the best,
Sterling
Maybe you are looking for
-
Add-on enabled but doesn't work
Extension add-on Multi-row Bookmarks Toolbar 5.0.1 (enabled) has been working fine for many months. Today it stopped working. Tried several times restarting Firefox each time but it still wouldn't work. I removed it then re-installed and tried again
-
External mail doesn't come in,
Hi, i have a 10.4.3 tiger server running, everythings works fine exept for the mail server. I can send and receive localy mail, and i can sent mail to external mail servers but i can't recieve mail from external mail servers. This is the output of po
-
ITunes library will not populate in Aperture
MacBook Pro (Retina, 15-inch, Mid 2014), 2.8 GHz Intel Core i7, 16 GB 1600 MHz DDR3 OSX 10.10 iTunes 12.0.1.26 Aperture 3.5.1 I am trying to create a slideshow. Aperture asks me to open iTune to populate this list. This does not work. I still cann
-
How to transport particular files from "workcatalog" to "archivecatalog"
I only want to bring some paticular folders from a workcatalog into an archive catalog so this could look like : workcatalog folder a subfolder with original files an catalog info subfolder with exported jpegs subfolder ....... folder b sub b sub b s
-
Do I need to patch ASM home?
Hi, I have a Linux 4 server which has ASM HOME and RDBMS HOME and both are on 10.2.0.2. I want to apply the latest CPU. Do I need to apply CPU on ASM home too. This is not a RAC environment. --MM