HT4106 How do I use a midi keyboard on GarageBand with my iPad? When I try it says the device cannot be used as it requires too much power. However, I have given the midi it's own power source.
How do I use a midi keyboard as an input device on garageband? Its an oxygen 61 board. I'm using an iPad camera connection kit and a separate power source for the midi but each time it says it cannot use the midi as it requires too much power.
I have the same problem with my iPad and 61. Sometimes it says device not supported and sometimes it rants about power - any solutions anyone ?
Similar Messages
-
When I tried to sync my iphone 4 and ipad in iturnes, an error message popped up saying this device cannot be used because Apple Mobile Device service is not started! What does that mean and how do I start service? I've had these devices for over a year and update and sync regularly and have never seen this message before!
I got that message yesterday. I'm new at this so don't know if this is the correct solution but it worked for me. I reset my iPod by holding the 2 buttons down until the apple appears AND I restarted my computer. After that everything worked.
-
My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I am trying to restore my Iphone but get a message that reads "The Iphone "Iphone" could not be restored. The device cannot be found.
Can anyone help?
Thank you.That screen indicates that you need to connect the iPhone to your computer with the USB cable and restore from iTunes
Allan -
Problem with iPad when I try to select a photo from gallery using browseForImage
Hi, this is my first post, and I hope you can help me with this problem...Im using cameraUI.launch for open the camera app and take a picture without problems, this works fine, but when I try to open gallery from iPad using browseForImage this open a little window to select a folder rigth? but when I try to select any folder this cancel all operation and I cant upload any picture from my gallery..please help,,,Im working with FB 4.7 , apache 4.14 and adobe Air 16.0.0.272, on Android devices and iPhones I dont have this problem just on iPad.
this is the source code:
protected function btnGallery_clickHandler(event:MouseEvent):void {
if( CameraRoll.supportsBrowseForImage )
if(Capabilities.manufacturer.indexOf("Android") >= 0)
loader = new Loader();
loader.contentLoaderInfo.addEventListener( Event.COMPLETE, this.contentLoadedHandler );
cameraRoll = new CameraRoll();
cameraRoll.addEventListener( MediaEvent.SELECT, imageSelected );
cameraRoll.addEventListener( Event.CANCEL, browseCanceled ); /*This is activated whenever I try to select a folder to select an image on the iPad*/
cameraRoll.addEventListener( ErrorEvent.ERROR, mediaError );
cameraRoll.browseForImage();I have te same unfortunate problem. Only happens in iPad. cameraRoll.browseForImage() opens a new window but wherever I touch (on folders, or anywhere on the window or out of the window) it dispatches a Cancel event and closes window.
I tried to dispatch flash.events.Event.DEACTIVATE, from nativeStage and from cameraRoll, before and after calling cameraRoll.browseForImage() , but still it was behaving same as above.
I tried setting displayState as:
Starling.current.nativeStage.displayState = StageDisplayState.NORMAL;
But no help neither.
It doesn't show any error, I don't have any other solutions to come up with. I feel that somehow I need to invoke application to deactivate, to let my touches focus on CameraRoll window, but I don't know how to do this actually (I tried to dispatch DEACTIVATE event from various sources but I dont believe it is an effective way of doing it).
I use AIR 16.0 with Starling, test on iOS 8.1. -
Cant install flash player. when I try, it says flash player is in use
I have uninstaaled it from contro
l panel, I havr run the adobe uninstall program, yet when I try to insta
ll it, it says the program is in useDownload the installer from http://www.adobe.com/products/flashplayer/fp_distribution3.html
Make sure that all browser windows and messengers are closed when you run the installer.
If you continue to have problems, please state the exact error message you're getting, as well as your Windows version and browser. -
Firefox 5.0 quickly uses 256,000+ of memory and becomes slow enough to use 60% of a twin-code processor and fails to respond for many, many minutes (10 mins +). It is often quicker to kill it ans start again, but this is a pain as I can have up to 4 /5 tabs open.
Try a new Profile and see how it is.
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows -
Can someone tell me why my macbook pro wont bootcamp to windows xp and it says that the disk is invalid or unreadable?
Vista isn't supported either but my MacBookPro 4,1 with Lion does boot off the Vista DVD. I'd wonder if this Windows XP disk actually is invalid or unreadable. Can it be mounted when you're running Lion?
-
can anyone help me solve the problem? i've tried on all apps i have. i can buy apps from the app store, but i can't do in-app purchase.
Not clear what you mean by iTunes help. You can contact iTunes support by:
Apple - Support - iTunes - Contact Us -
how do i reset my security answers
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(95586) -
can't install firefox 4
Temporarily disable your anti-virus application just long enough to do the Firefox program download.
-
How do i sync my outlook (on a PC) with my ipad
How do I sync my outlook (on a PC) with my iPad? I want to sync everything if I can including mail, contacts, calendars, and tasks.
I don't have my computer on to doublecheck this but in iTunes, under 'info' there's selections for syncing email, notes and contacts. So I'd looks there first.
-
Resounding note with a MIDI keyboard in GarageBand
Hi everyone!
I am having a problem with a resounding note with a MIDI keyboard in GarageBand. I am running the following:
GarageBand Version: 10.0.2
Keyboard: Korg PA50
Macbook Pro 2.3 GHz Intel Core i7
16 GB of RAM
OSX 10.9.4
What happens is when I am recording, one note (could be an Eb, could be a G, the note changes each time) continues to sound after I have stopped recoding and taken off the sustain pedal and my fingers off the keyboard. It happens for virtual instruments that don’t even sustain using the sustain pedal such as an organ. The solution to this is to select a different virtual instrument and reselect the one I was using. This is not great especially in the middle of recording.
If anyone has any ideas, that would be much appreciated! If you need any extra info, please ask!
Thanks for your time!To anyone with this issue, I have resolved it. I was using a third party USB-MIDI cable. I bought a new proper one for $65 (NZ Dollar) and have had no problems since. Hope this helps!
-
Looking for the Product ID and Vendor ID for my Radium 49 USB MIDI keyboard to work with Labview 7
Is there a tool to find out the Vendor ID and Product ID for a USB device?
Example: of what I'm looking for
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The
USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093)
(that is decimal 4243).
Thanks for all the fast responses this newsgroup RULES!!!!!!!!!!!!http://digital.ni.com/public.nsf/allkb/335A90747734097886257070006415B9
How To Find The Vendor and Product ID for USB Devices?
Primary Software: Driver Software>>NI-VISA
Primary Software Version: 3.3.1
Primary Software Fixed Version: N/A
Secondary Software: N/A
Problem:
I want to make an NI-VISA driver that requires the vendor and product ID?
Solution:
There is a utility called USBView,
free from Windows, attached below, which you can use to view what is
connected to your computer's USB ports. It is necessary to load this
program and connect the USB device in development. Upon selecting the
device in USBView, one can then look on the right side of the
application window to obtain the Product ID and Vendor ID. This will
allow you to enter in the correct IDs when creating a driver .inf file
when using the VISA Driver Development Wizard. For more information
about how to use the VISA Driver Development Wizard see the related
links below.
Note: It is necessary to keep the hexadecimal
(0x####) format. Do not remove the "0x" hexadecimal format preceding
the ID number. -
How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?
Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario
Maybe you are looking for
-
Syncing my Centro on two computers
I am trying to hotsync my centro on two different computers. I have desktop ver 6.22 and hotsync manager 7.0.2 installed on both computers. When I sync on my "main" computer all is well. This is the computer I first sync'd my centro on. When I try to
-
Video clips are not sorted by capture date
I am running a 30 days trial on LR5 as I want to "ascend" from Photoshop Elements / Organizer to PS CC / LR. I noticed immediately that movie clips from my (Sony) digital still cameras don't sort by their capture date/time, but instead put at the bot
-
Installing JDK6u2532bits on Oracle Linux v6 64 bits
Hello, I am having some dependency issues when trying to install JKD32bits on OEL 6 64 bits. When using the self-extracting JDK package I get the following error: $ sh jdk-6u25-linux-i586.bin Unpacking... Checksumming... Extracting... jdk-6u25-linux-
-
Tried restarting download from the "Purchases" tab but the app comes out with "an error ocurred " message and I the button next to it is grey without any text or action. Please help, cannot dowload bad piggies game
-
Please help. Issues with opening a .prm file.
I am trying to open a Win-CNC.prm file and all that happens is Adobe Premier Elements program pops up and that is it. What am I doing wrong?