HT4108 Can I use the VGA adapter to show keynote slide shows on a projector?

Can I use the VGA adapter to show keynote slide shows on a projector?

iPad 1 does not do screen mirroring like the iPad 2.
Open the app you want to output and see if it works.
http://support.apple.com/kb/ht4108

Similar Messages

Can I use the same adapter for my ipad mini w/ retina display as I use for my iphone 4S?

I have an iPad mini with retina display and an iPhone 4S. Have both the small and large adapters (5W and 12W I believe) that came with the two products. I am traveling abroad and want to know if I can just use the smaller adapter (little cube-shaped one, 5W) for both the ipad and the iphone. OR, can I forgo taking the Apple adapters that were supplied, and instead use one of the travel adapters that has two 2.1-Amp USB ports?

You can use the 5W to charge the iPhone, but if it charges the iPad Mini Retina, it will be slow, so you would have to turn it off and let it sit forever to get charged. If you were going to take just one, take the 12 W on as you can use it to charge both devices without issue.
I would recommend getting the Apple travel adapters if you are going abroad. The 12W adapter should have a duck head you can pop off and put the international adaptation on there. http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit

How can I display to a projector using the VGA adapter?

Using a VGA Adapter to the Thunderbolt connection, I can display a Keynote presentation just fine, but I cannot seem to display the screen to project an internet page to a group of people. Is there some trick to this?

From your description my guess is that you need to open System Preferences and select the Displays tab. Then click on the Arrangement tab and in the bottom right hand corner click on Mirror Displays. My guess is that at the moment your display setup is for 2 separate displays, 1 for the computer and 1 for the projector.

Can I use the source adapter 10W to load the ipod touch 4 generation? The same used to Ipad.

Can I use the 10W power adapter to load the ipod touch 4 generation? The same used to Ipad?

Yes.

Can I use the AC adapter made for the iPad with my iPod Video (5th Generation)?

I have a choice of using the original adapter or the newer adapter made for the Ipad. The original is rated at 5 volts @ 1 amp output. The newer (iPad) adapter is rated at 5.1 volts @ 2 amps output. I tried to recharge the battery and it worked, but the recharge time from a dead battery was around 6 hours. The difference of the voltage is neglegible, but the ampere rating shouldn't hurt the iPod as it only draws as much current (amps) as needed. Having said this I thought that the recharge time would be less...apparently not. I just do not want to damage the iPod. The iPad charger does not get as warm as the original while charging.
Any help is most appreciated. Mike (Phillipsburg, Missouri, U.S.A.)

I've been using my iPad charger to charge my iPhone for over a year. I haven't had any issues. But I can't promise you that your experience would be the same.

Can I use the File Adapter to transfer files from/to my own PC

Hello,
Would it be possible to set tu the file adapter to send or receive files from my own PC's file system?
For example I would like to transfer a file from my PC to PI instead of using PI's file system?
Can I do that?
Thanks
Marcelo

If your PC has Windows-based system, SAP XI is Unix-based, you have a problem: Unix can't connect to UNC-path - Unix doesn't understand path like this "
mywindowspc\myfilesharefolder\", and Windows can't mount unix-drives. There are has a tool that can mount Windows UNC-file-share on NTFS like dirive UnixFS - but this tool is not freeware and has a problem when you switch off your PC without unmounting your Windows-dirives on Unix system. You can use a SAMBA, but Admins doesn't like to install this to Unix...
So, if you want to use a File Adapter you can set only FTP path, create FTP-site on your own PC, and so on...
Another way to send information from/to your own PC is "Plain J2SE Adapter Engine". This is a standalone part of SAP XI, you install it on your PC, configures URL of XI pipline, sets local folders to transfer from/to your PC, masks and types of your files, time to sending, any rules and DOS-commands for "before/after sending and receiving" and so on...
In case of sending files from PC to XI, files transforms to XI-payload inside this Adapter Engine and then goes like XI-message to pipeline... When you send it back, payloads come to this Adapter Engine and transform to files on your PC.
I used this Plain J2SE AE on my working notebook for checking sending messages to many different XI Systems.
For more info: http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/content.htm
Regards.

Can I use the IPad adapter/charger to charge my iphone

My wife and I have been using the same Apple adapter/charger to charge our iphone & ipad.
I decided today to purchase another aso we can each have our own.
When I went to the apple store I was told that I should purchase an IPad Adapter as it used 10 watts.
When I got home I checked and found that I've been using the 10w to charge my wife's iphone successfully.
Should I return the adapter I have just bought & get an iphone adapter or can the ipad charger be used for both.
thanks

The iPad adapter can be used to charge the iPhone.
Stedman

Qosmio X305 - Can I use the AC adapter in Europe?

I just bought the model listed above from the USA and I am from Europe. I am not a tech person and would like to ask a simple question please.
It says it has AC Adapter
180W (19V x 9.5A) 100-240V AC Adapter
Does it mean that it will switch automatically to my country's voltage or no? Or I need to do something from my side?
Etienne
[email protected]

Hello
Yes, that means the AC/DC adaptor switches automatically to your Voltage in your country and so you dont need an additional adaptor.
I hope I could help you a little bit :)
Greets

Can I use the Apple ADC to DVI adapter with a VGA monitor?

Hey everybody,
I have a quick question. I work on computers fr friends and family as a hobby. I have an ADC monitor and need ot be able to hook up computers with a VGA port on them to it. Can I use the Apple ADC to DVI adapter along with an Apple DVI to VGA adapter to successfully connect VGA computers to my ADC display? I was assuming this would work and ordered both adapters but now I have made myself nervous about weather or not this will actually work. Has anybody out there successfully done this? Thanks for your help in advance everybody.

You can't run an ADC display with a VGA computer without a converter. Adapters won't do it.
a VGA to ADC converter will drive the ADC display directly
<http://www.gefen.com/kvm/product.jsp?prod_id=1301>
If you have the Apple DVI to ADC adapter
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
you could use it with a VGA to DVI converter
<http://www.gefen.com/kvm/product.jsp?prod_id=1310>
It might be cheaper to get DVI graphics boards for the computers and use the Apple DVI to ADC adapter.
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>
Your title says "Can I use the Apple ADC to DVI adapter with a VGA monitor?". If you want to connect a VGA monitor to a computer's ADC port you need the ADC to VGA adapter
<http://www.gefen.com/kvm/product.jsp?prod_id=1299> You can't use an ADC to DVI adapter followed by a DVI to VGA adapter, because the ADC to DVI adapter doesn't pass the analog video signals needed for VGA.

When I connect my iPad2 to my tv using the AV adapter I can hear sound for everything else except for my movies. I can hear tv shows, music, videos off YouTube, etc. I just can't hear the movies. Any ideas of what may be wrong?

When I connect my iPad2 to my tv using the AV adapter I can hear sound for everything else except movies. I can hear tv episodes, music, YouTube videos, etc. anyone have an idea of how to fix this issue? Thank you for your help in advance.

Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Can I use the new Apple Thunderbolt to Firewire adapter to download video from a video camera by firewire to my Macbook Air ?

Can I use the new Apple Thunderbolt to Firewire adapter to download video from a video camera by firewire to my Macbook Air ?

Yes, you can use the 85 watt adaptor. You cannot use the new adaptors because your computer is not equipped with the proper MagSafe connector. But you can use the older MBP adaptors as well as a 60 watt replacement adaptor. All can be found at Apple's Online Store.

In my SOA Composite, Can I use file/FTP adapter to get the EDI X12 850

Our requirement is to build a SOA Composite to dump all the details in a EDI X12 850 ( Purchase order ) document in to a database table. In my SOA Composite, Can I use file/FTP adapter to get the EDI X12 850 element details to map them to a base base columns.

Drop the File Adapter to the left lane of the composite i.e., Services lane...
Go to Step 2, give a meaningful name....
Step 3, select "define from operation and schema"
Step 4, select the operation type as "read"
Step 5, select physical path and give the folder path in the "Directory for incoming files" field.,
Step 6, select wildcards and give the expression depending on the file name it would be at run time...
Step 7, select the polling frequency as required....
Step 8, in the URL field, adjacent to that , select "browse for schema file" and select the XSD which you have exported from B2B Editor.
say next and finish, you will be good to go.
Hope this helps,
Thanks,
N

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why??

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why?? Pls help.

Yup - nothing happens. I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote. My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right? Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
Sorry - novice at this. Not very tech minded either...

Can I use the Ipad3 power adapter for the Iphone5

Can I use the Ipad3 power adapter for the Iphone5 or vice versa?

No more than usual...
A quick search will yield the number of times this comes up.
I have been charging my 4s with mu iPad 2 charger since new

Can i use the iPhone-power adapter to charge my iPad 2??, Can i use the iPhone-power adapter to charge my iPad 2??

Can i use the iPhone-power adapter to charge my iPad 2??, Can i use the iPhone-power adapter to charge my iPad 2??

I don't know about that for sure, but my guess is that it won't matter. Battery technology today is much better. You should follow Apples battery tips here:
http://www.apple.com/batteries/ipad.html

HT4108 Can I use the VGA adapter to show keynote slide shows on a projector?

Similar Messages

Maybe you are looking for