HT4108 Getting sonos wifi speaker to play audible books

How to do this when the audible books were bought using the iPad via iTunes.?

It's 03/18/2014 as I write this. Don't buy the Sonos if you're an audio book lover. I couldn't get their system to sync with my Audible account. Another user in our household couldn't get the Sonos app to read audio books she bought from iTunes - all 100% legit, purchased items.
I returned my Sonos pain in the *** device and bought a Definitive Technologies Bluetooth-based Cube. I plugged it in and within 2 minutes I was playing every single thing I wanted directly from my phone. Awesome sound quality - every bit as good or better than Sonos. If it was on my phone I could play it - easily - no hassle. http://www.amazon.com/Definitive-Technology-Wireless-Bluetooth-Speaker/dp/B00GP3 XXBO

Similar Messages

How to play Audible books in Nokia 5310 ?

I have downloaded the books from Audible.com, and transferred it to the 5310. Also, an appliaction from Audible.com is also installed in my phone, I think the application is called Audible Air.
However, when I try to run this application, the phone pop up a message:"Certificate not on phone or SIM".
Anyone know how to play the Audible books in the Nokia 5310?
Is it necessary to connecto the phone to the internet?
Thank you very much

I'd be interested to know how you get around this problem. When I go over the air to install I just get 'certificate not on device or SIM'.
Any ideas?

Ipod touch playing audible books at an accelerated speed

My ipod touch is playing my audible books at an accelerated speed. My music seems to be fine, so just the books

When you are listening to an Audible book, if it shows the progression bar at the top, you will have three buttons under it. On the left is two arrows (repeat). Center is a circled arrow (go back x seconds). On the right is a square with a number in it. (Speed) There are three speeds, 1/2x, x1 & x2. When playing at normal speed, the button will be white, x2 and 1/2x it will be blue. Touch it until it says 1.
If you don't see the progression bar and buttons, touch the screen anywhere and they will come on. Then you will be able to see what I mean.
I hope this helped. I love my Audible Books. So much so, in fact, I have a 64GB Touch with only my Audible books on it.

HT4059 I am on a Mac Book Pro Laptop and how to play Audible books?

Hi, I am working with a new Mac Book Pro and would like to download Audible books from Amazon. I am having trouble finding the App that would allow me to listen to such books. Suggestions?

You'll need your CS6 upgrade serial number plus the serial number of the earlier qualifying version from which you upgraded (CS5?).
Download the CS6 Mac installer from Download and Installation Help
Install then enter your CS6 upgrade serial number and your CS5 serial number when prompted.

Audible Books

Palm Pre is not listed as a Device on Audible Web Site. Has anyone figured out how to play Audible books on the Pre?
Post relates to: Pre p100eww (Sprint)

I installed Classic by MotionApps on my Pre (free from the app catalog) and using The Missing Sync software from MarkSpace, which is the software I use to sync my Mac and Pre, I now have my audible books working on my Pre. Here are the websites, and instructions from MarkSpace, below.
http://www.motionapps.com/classic/overview/
http://www.markspace.com/
Instructions
Use The Missing Sync to get classic Palm apps onto your Pre.A wonderful app from MotionApps lets Palm Pre users run Palm OS applications on their phone. It's called "Classic". This is great news for Palm Pre owners who used to use a Palm OS device, like a Treo smartphone or Tungsten handheld. They can continue to use many of their favorite Palm OS apps, like SplashID, HanDBase and iSilo, and even games like Bejeweled 2 and Warfare Incorporated.*
The Missing Sync for Palm Pre can help easily install Palm OS applications on a Pre phone from a PC or Mac.
Follow these easy steps:
1. Create a folder on your computer named, "Palm OS Apps" and place your application PRC and PDB files in this folder.
2. Connect your Pre to your computer with the USB cable and mount it as a USB Drive.
3. Launch The Missing Sync for Palm Pre and open the Folder Sync settings by double-clicking Folder Sync in the Plugins list.
4. Add the new folder you created in step 1 as a folder to be synchronized.
5. Next, change the Device Folder by double-clicking the device folder path in the Device Folder column. Set the destination to "/ClassicApps/Install".
6. Close the settings window and you're all set!
The next time you sync with The Missing Sync, Folder Sync will copy your PRC and PDB files to your Pre, ready to be used in Classic! And, The Missing Sync for Palm Pre does a whole lot more.

Audible books are sounding tinny on my Iphone 4s. Is there anything that I can do.

I play Audible books all the time and all of the sudden they started sounding tinny when I played them. My music sounds fine. Does anyone know what to do about this?

What photos?
Photos that you synced from your computer to iphone should still be on your computer.
Camera Roll photos ( taken with iphone)? You should be importing these regularly to your computer as you would from any digital camera. If for some reason you have failed to do this, then you would have to be able to restore from a previous backup where the pics were present ( if on exists). Otherwise they are gone. Import regularly.

The Ipod I have been using for years no longer will hold a charge. My wife doesn't use hers so I would like to use it as my main ipod now. How do I get it to sync my play lists?

The Ipod I have been using for years no longer will hold a charge. My wife doesn't use hers so I would like to use it as my main ipod now. How do I get it to sync my play lists?

Hi BFW29,
Thanks for visiting Apple Support Communities.
You can use these steps in this article to set up syncing with your computer and the new iPod:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Regards,
Jeremy

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Treo800w: Wifi + Speaker = Suck (with wifi hint that should go in the sticky)

Hi all! Posting my first problem on these boards I've been through two Treo 800w's (I actually LOST one almost as soon as I got it, argh). Both 800w's had this speaker problem, although I didn't put all the pieces together until last week (I had been operating under the theory that the original Treo was suffering from intermittant speaker failure, possibly due to a cold solder joint- took some time to see that both units had the same problem, and only when wifi was on.)
When wifi is on (connected, unconnected, doesn't matter- but it's worse if wifi usage is heavy)- the speaker output sucks rocks. Speakerphone? Can't understand the speaker. Ring tones/notifications/etc? Crackly, awful. Ask it to play music or video? It really sounds like the speaker is being physically damaged now, the distortion is so crackingly severe.
Turn the wifi off? The external speaker is sweet as pie. [Edit: That's overstatement. The external speaker still sucks compared to the one on my old free VX8300, but it's MUCH better than it is with the wifi turned on.] Connect the USB earphones that come with the 800w? Sounds beautiful, no distortion whatsoever, and it doesn't matter if wifi is on or off in this case.
In summation: the wifi card being on totally screws up the external speaker, and even if you have the volume set to minimum where you can't hear it, it sounds like that poor speaker is dying if it's asked to play any sounds. Does anyone have a fix? (I bet it's a hardware problem and there IS no fix )
Edit: I just played with this a little. I turned the WiFi off and put a movie on the Media Player. It sounds OK-ish. With USB headphones, it sounds fantastic. Turn wifi on, and USB headphones sound fantastic (unchanged). Remove the headphones and go to the external speaker, the sound is extremely loud cracks and pops that are much louder than the sound generated by the movie. (MUCH louder...to the point that you can't hear the dialogue and worry that the speaker is being damaged.)
Edit edit: Interestingly, if you turn the phone off or on while sound is being played, you hear similar audio artifacts. They only persist while the phone is going on or off- and do not linger after the transition, unlike the wifi hardware, which generates louder artifacts the whole time it's powered on.
Also, one hint that's not in the stickied FAQ (for users in urban areas, mostly): If you can't get your wifi to connect and everything is set right on both ends: The antenna in your treo sucks. That's the price you pay for it being invisibly small. It's a good tradeoff. Change the channel on your wifi access point to be as far away as possible from any other access point within reception range (If you have to pick, get as far away as you can from the loudest one). What I mean here is that you should get a laptop or a PC with wifi hardware, put it where you want your Treo to work, and find out what channel your wifi WAP is on, and what channel the WAP with the most signal strength is on. Set the channel of your wifi WAP to be as far away from the competition as possible. Channel 1 and channel 11 are common factory presets for 802.11b and 802.11g WAP's. I spent about three hours today trying to get my Treo to connnect to an AP it had been working fine with the day before... and as soon as I changed the channel to get away from an AP that was so soft the Treo didn't even list it (though my PC listed it at -45 dbm), it started working great. (To clarify, my wifi broke because someone put up a WAP that was far enough away that my Treo didn't even see it, on the same channel as my WAP.... and no amount of fiddling could fix it. However, changing my WAP's channel fixed it immediately.)
Post relates to: Treo 800w (Sprint)
Message Edited by cmcgee03 on 09-16-2008 08:40 PM
Message Edited by cmcgee03 on 09-16-2008 08:47 PM

Sorry to hear about your trouble with the 800w. The issue with Wi-Fi causing issues with the speaker has been reported and has been escal to the proper department to attempt to address it.
We're always grateful for tips to improve function on the device. (Your wifi connection tip.)
Post relates to: None

New software and wifi speaker

I have just updated my software on my iPhone 4s to iOS7.0.2 and now can't get it to play my music through my wifi speaker - Pioneer A4. I only bought it recently and now I regret updating my software on my phone if I can't play my music!! Any help would be appreciated! I have gone through setting it up again (not that I should have to) and it still doesn't work.

Sorry everyone - discovered how to do it!!! Thanks anyway :-)

How can I get iTunes to locate and play all my music files?

How can I get iTunes to locate and play all my music files?

I have this problem too. I am researching now. Here is what I know so far. If you right click a song then get ifo the it will say Protected AAC or purchased AAC. Protected wont play on sonos, purchased will play on sonos. It seems that all my protected were purchased 2005 to 2009 or so. I am trying to find out if apply will convert these for a small dfee or if I use the itunes cloud these tunes will convert for me. downloading and reloading is not an option for me. Pretty much a money grab by apple either way. I am sure Steve is smiling.

Setup a pioneer sma 1 wifi speaker w/ ipod

I bought a pioneer sma 1 wifi speaker, how do I get the wifi to work ? did not get manual for the speaker.

I wish you did not have to pay Apple,Do I go on airplne setting. or what !

HT201272 When iTunes was upgraded to the lastest (11.0), many of of songs/music/audiobooks were deleted! I tried syncing my phone to my computer to get them back, but many of those were deleted too!   How do I get my purchases back to play them???

When iTunes was upgraded to the lastest (11.0), many of of songs/music/audiobooks were deleted! I tried syncing my phone to my computer to get them back, but many of those were deleted too!   How do I get my purchases back to play them???
It shows on iTunes SOME of my past purchases, but not all (looks like around 30-40% of purchases).    It shows on my apple id purchase history everything i have purchased; but in iTunes, some not all of these show up.    What does show up is kind of "greyed out", so NOTHING will actually play.   I have followed the steps in the iTunes support about how to redownload past purchases, but this dowsn't work, as the download button is also "greyed out".
I am extremly angry and upset about this issue. Could someone please help / advise re how to fix????

I'm hoping that this may be just a misunderstanding somewhere.
Could you show an image showing these greyed out items?

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

iTunes Store- Transferring purchases from iOS device or iPod to a computer
Downloading past purchases from the App Store, iBookstore, and iTunes Store
How to dowload purchased music

HT4108 Getting sonos wifi speaker to play audible books

Similar Messages

Maybe you are looking for