HT4110 How do you swich back to normal view from negative?

Everything on my screen has gone into negative view (not sure what was pressed)
Does anyone know how to fix this?
Thanks In advance!

>System Preferences>Universal Access>Seeing>Display...change to Black on White.

Similar Messages

  • How do you eliminate back the border width from a given selection?

    Perhaps a stupid question, I dont know, but whenever I make a selection and then go to selection>modify>border to select any given width from 1 to 200px, how do you eliminate back any created width? the value 0 is not accepted, only from 1 up. Does this mean I have to deselect everything and start the whole selection back over? that would take a lot of time if my selection was a little complex and took me some time perform it!
    I tried "googleing" that answer but couldnt find anyting so I am coming for help here.

    It's unclear to me what you mean by "Eliminate back".  Do you want just the border to extend inside the original selection?
    Are you recording an action?
    Keep in mind you can save any number of selections under different names via Select - Save Selection, then combine them with the Load Selection function using features like "Overlap" and "Subtract From Selection".
    -Noel

  • How do I get back to normal mode from safe mode and enable add ons again?

    I switched to safe mode to disable a few add-ons, but now I want to go back to normal mode. How do I do that?

    Firefox will open normally as long as you do not click the Safe mode link in the Start menu.
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    >In Firefox 4 Safe mode also disables plugins (Tools > Add-ons > Plugins) and hardware acceleration (Tools > Options > Advanced > General)
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • How do you connect "back to my mac" from and ipod touch?

    Does anyone know how to use the back to my mac function with the iphone or ipod touch? This would be really great to get access to the computer like you can with a laptop when on the road.

    Hi kclarke2000,
    The Apple official feature *Back to My Mac* is only supported from a Mac computer to another Mac! So, this means you won't be able to use this functionality with your iPhone or iPod Touch yet!
    However, you may want to leave feedback for Apple, by using filling out [this form|http://www.apple.com/feedback/mobileme.html].
    Hope this helps!
    Francisco

  • How do you get back to your mail from an Internet link?

    I am going thru my emails on my iPad and one email may have a link to an Internet site and I click on it - which takes me to the Internet.  How then do I get back to my mail?  Right now I have to press the Home key to get to my main screen and then click on the Mail app again to re-open it.  Is there any easier way?

    The iPad on the left is the iPad 1, on the right, the iPad 2.
    You will find MTG on the iPad 2 at Settings/General. And yes, KP is right, you must have upgraded the iPad 2 to iOS 5.

  • How do you roll BACK to iTunes 11 from 12.

    In a nut shell, version 12 of iTunes is a MESS. My Ipod HATES it as I can NOT delete nor add play lists and I've tried everything. 12 is a bug fest.
    I had no problems what so ever with version 11 and would LOVE TO roll it back. Anyone do it with success?
    If so please help the hundreds of us out in cyber space who would love to roll back too.
    Thank you.

    If you really want to roll back to 11.4 uninstall all iTunes/Apple components, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
    iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
    iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
    If you have trouble uninstalling or reinstalling see Troubleshooting issues with iTunes for Windows updates.
    tt2

  • IPhone 6: i accidentally tapped my iPhone 6 and everything got huge on my screen. now i can't even log onto my phone because everything is so big on the screen. how do i get it back to normal view, so i can log on?

    i accidentally tapped my iPhone 6 and everything got huge on my screen. now i can't even log onto my phone because everything is so big on the screen. how do i get it back to normal view, so i can log on?

    i googled for answer to resolve the zoom problem.  all the anwers just told you to read links but didn't tell how to fix the screem back to normal then it can be able to go to Setting to fix the zoom funciton.  HOWEVER, I accidentally found the solution myself by using a fingers or more
    to draw circles clockwise on the screen....it will reset it normally.  I spent hours trying to go diagonally, compressively still didn't work.

  • Acrobat 9 standard. The adobe inons on my desktop turned white, how can I bring back the normal pdf icons?

    Acrobat 9 standard. The adobe inons on my desktop turned white, how can I bring back the normal pdf icons?

    Please don't post the same question mutliple times!  I have deleted your duplicate post.
    Have you tried a System Restore to a time before the change occurred?

  • When I scrolled text became very small and I do not know how to get it back to normal

    I don't know what happened. I was moving my mouse over the screen and the text kept shrinking, until it's so small you can barely read it. I don't know how to get it back to normal size.

    Holding the Ctrl key while scrolling increases or decreases the zoom level. You can reset the zoom by pressing Ctrl+0 (zero). [[how-do-i-use-zoom|More on Zooming here.]]

  • How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

    how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.

  • How can you enable back the Android native Menu button in AIR 2.7?

    I've noticed in AIR 2.7 for Android, that now the bottom icons in Android 3.0 Honeycomb are hidden (replaced by small dots) in AIR 2.7, whereas in AIR 2.6 they were always visible. That's cool. Since the bottom bar can never be hidden in Android 3, at least now those icons are less visible (unless you intentionally touch the bottom bar, then the icons show up for a few seconds).
    BUT I also noticed in AIR 2.7 compiled apps, the native "Menu" icon is not visible anymore, even after touching the bottom bar. In AIR 2.6 you could see and press that button (which can be captured from AIR so you can show a custom settings menu or whatever).
    So, quoting the subject --> How can you enable back the Android native Menu button in AIR 2.7?

    There is a work around and a reason for the menu issue.  Honeycomb doesn't natively support a menu softkey, it is only to support old apps comiled in phone API levels.  If you compile a Honeycomb app in 2.7 or 3.0, it is expected you manage the settings within the larger tablet UI framework.  See below link for more info and work around. 
    http://forums.adobe.com/message/3964792#3964792

  • My iPhone seems to be in visual impaired mode, and the touch screen no longer works.  How do I get back to normal mode?

    My iPhone 4S seems to be in visual impaired mode, and the touch screen no longer works.  I have tried rebooting the phone without success.  How can I get back to normal mode?

    I solved my own problem by clicking the home button 3 times.

  • How can you get back to the registration screen to change information once registration is complete

    how can you get back to the registration screen to change information once registration is complete?

    You don't have to. Just go to Apple's Express Lane and add products.

  • With the new io5 on safari how do you get back to top of the page quickly

    With the new io5 on safari how do you get back to top of the page quickly?

    Same way as before - click on the top. But the area to click seems to be slightly lower ... aim for the touch of the grey and black instead of the black.

  • How do you get back to the main screen?

    How do you get back to the main screen? My little movie screen is not in the top right corner as it usually is... ever since it unexpectedly shut down. I can not edit it anymore and the screen is in the middle and the clips and sound are separated underneath. PLEASE HELP THIS PROJECT IS DUE TOMORROW AND I WAS ALMOST DONE

    my limited experience tells me that different magazines work differently.
    try double clicking the home button and then swiping the magazine image up off the top of the screen

Maybe you are looking for