HT4110 my brightness on screen is fading even though turned all the way up

does anyne know how I can fix this or do I need to take to a service dept.?
Thanks

Hello dreuer
Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Regards,
-Norm G.

Similar Messages

  • HT1937 my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • Vol is low even though adj all the way up.

    I have set up and adjusted vol high and still is low how can I correct this problem ?

    Hi,
    One thing can help is the following.  Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My volume is really low even when turned all the way up.  Is there a fix?

    I got this ipod for fathers day and just started messing with it this weekend.  The volume is really low.  I downloaded my music and have tried several songs plusdifferent earphones and the radio on the ipod.  I can hear it but it is to low to run with.  I think ill here myself panting over it.  Is there a fix or does apple support the problem?

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • Mini Dvi to hdmi problem, the mini dvi doesn't even plug in all the way?

    hi,
    i have a mid 2007 macbook, i just bought a mini dvi to hdmi cable, i tried to plug it in and it doesn't even plug on all the way, 1/3 of the conector is still hanging out, and it doesnt display anything anyways, nothing is detected on the macbook or the TV.
    somone seem to have the same exact problem as me with the laptop, but his query wasn't answered it was the last post on this thread.
    https://discussions.apple.com/thread/3660057?start=0&tstart=0                        

    Thanks for that. I have a Y adapter (3.5mm stereo headphone jack to RCA sound just like you said). Under input options on my TV, I can select either HDMI1 input (which gives me video only) or AV1/S input (which gives me audio only) - not both at once...Could you explain how I can get stereo audio on my TV?

  • HT201210 the screen on my ipod touch will only show the apple icon it will not turn all the way on

    the screen on my ipod touch only shows the apple logo.it will not shut off or turn all the way on and when plugged into itunes it will not allow the newest update

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When i record i can barely hear anything and the input meter is barely reaching -34db even when the gain on my interface is turned all the way up on my interface

    this issues is really getting to me. its works perfectly fine when am recording on ableton but on logic the input is so low :/

    a
    as u can see i have used the same setup for years no problem till a week ago :/

  • 3g phone ringer all the way up but very faint, all sounds are very faint or none at all.  Even the click when turning off is bearly audible.  Is there a fix for this?

    My phone volume has almost disappeared.  Screen clicks, ringer all of it is bearly audible, sometimes not at all.  Everything is on, ringer volume turned all the way up.  Is there a fix for this on the iphone 3G?

    I am simply lookig for some help not an argument.  I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts.  I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another.  As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP.  This MBP was running Leopard when the problems started
    I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue.  I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion.  In Windows 7 I am able to print and scan to my hearts content without any issues.  I am able to browse the internet as much as I want.  I close Fusion and try to connect to my printer via wireless and nothing.
    In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems?  Out of the 1000 + posts is there a consolidation of which answer is the best?  BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
    In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time.  Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. --  Thanks

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

    I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings If yu can see the screen enough to do it)
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store since you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My 2012 MacBook Pro fell and it now makes a clicking noise and shows a grey screen on startup. I'm afraid the hard drive is damaged. Is their anyway to still back up my hard drive even if it doesn't turn on all the way?

    So my late 2012 MacBook Pro was sitting on my desk when the desk collapsed. The computer fell with it and I was quite scared at the moment, but thankfully I opened it up and it worked perfectly fine again.
    I was later watching a YouTube video and pressed the back button. The screen then froze, and I could not force quit safari. Then this weird clicking noise started to happen. It was coming from the right of the trackpad. That's when I decided to force shutdown the computer with the power button.
    I let it sit and then decided to turn it back on. The clicking noise then came back and there was just a blank screen on the boot up. Eventually a grey folder with a question mark started flashing on the screen. That was all it did so I decided to turn it off again.
    I'm going to take it into the Apple store ASAP, but I'm curious if my hard drive is damaged and if I will need a new one, which would erase everything on my Mac. So I was wondering if there is anyway to back up the hard driver even if it doesn't boot up all the way, or turn on the computer all the way.
    P.S. I have never backed up my hard drive so I wouldn't know what to do.

    You may have damaged the HDD which is located in that spot. I would take it in for service.

  • TV screen is blank even though the apple tv is installed correctly

    I sucessfully installed my new apple tv 2 with my television yesterday, then took it to another home where I want to use it and it will not work, tv screen is blank even though it is plugged in correctly etc

    Did you verify the input? Is it an HDTV capable of 720P?

  • My iPad dosen't open, my screen is black even if I use the open/close buttun??what can I do

    My iPad won't open, my screen is black even if I use the open/close reset botton???

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset (not sure whether this is what you meant by a reset) ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but fro

    ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

    ipone5 screen became curved so you can show filter lighting internal slightly from both sides and then taking the bend is growing even split-screen device by 2 mm from the top screen still works, even though it is no longer adjacent to the device, but from the bottom with the appearance of a blue line longitudinally as a result of the curvature of the screen is also a button home-does not function well will not make my device and search for a solution with my friends interested in the technology, because I am embarrassed by the form of the device after the holidays where it seemed like device industry is poor and I am writing to Mtabaana that the iPhone is the best among "smart phones" unwillingness on the label and I have reasons as he have many ideas Perhaps the first is to install the replacement screen with adhesive to Atsamad in front of the machine heat from the inside and the outside of the hot weather in another way Macaianikiholas latest device that will not require recharging,,, NOTE: void wrought screen contributed to increase the signal network and wifi is erase

  • Blank screen on updates even though it shows I have updates

    My Ipad screen is blank even though it says I have updates

    Try this workaround
    App Store>Purchased>Select "All"
    Note: Look out for apps that have the word "Update"
    http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

Maybe you are looking for