HT4111 I have an IPAD updated with iSO 7. Recently I purchased a logitech wireless keyboard and I went to pair the two up and the IPAD shows that the keyboard is paired or connected but when I type using the keyboard it does not transfer to the pad scene.

I have an IPAD updated with iSo 7. Recently I purchased a logitech wireless keyboard.
I went to pair the two up and the IPAD recognizes the keyboard and cites that it is connected.
But I proceed to type the words do not transfer to the screen.
Any suggestions? Techs at Best Buy state that the iSO 7 is not yet compatible with the keyboard manufacturers?
How long before they are?

The BestBuy guys are clueless.  I use a Logitech BT Tablet keyboard with my iPad 4 - used it before with iOS 6 and use it now with iOS 7 and it works just fine.
A simply thing to try is to remove the BT pairing, reset your iPad (hold the on/off/sleep button and the home button at the same time until the Apple boot logo appears), then try repairing them.  You may have to force the keyboard back into pairing mode (on mine, there is a button on the underside, near the on/off switch, that I would press and hold for second or two to force pairing mode).

Similar Messages

  • My WiFi has a problem my ipod says it is connected but when i go to apple store it does not work

    my wifi has a problem . my ipod says it is connected but when i got to apple store it does not work

    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/disk-full-and -much-more-misery/e9dabe09-7392-4f67-848b-c09cb1adb364

  • My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT4623 Dear AppleCare,  My iPhone 5 was bought with full price in the USA from Sprint, and I was told that it is a global phone.  But when I am back in China  using local carrier,  Can not be activated

    >
    >>Dear AppleCare,
    >>My iPhone 5 was bought with full price in the USA from Sprint, and I was told that it is a global phone.
    >>But when I am back in China  using local carrier,  Can not be activated
    >>I can't believe that !
    >>>Details:
    >>>SN:F1*******8GL
    <Personal Information Edited by Host>

    Sorry to tell you this but this is not AppleCare.
    This is a forum of users just like yourself who do their best to help other users.
    We are not able to help you with your problem

  • I re-set password using specific user ID but when I put new password in it does not say incorrect password  it just spins and spins never accepting it.  What is the problem?

    I re-set password using specific user ID but when I put new password in it does not say incorrect password  it just spins and spins never accepting it.  What is the problem?

    Update on my problem connecting in Itunes with my Airport Express. Not sure if anything I tried made a difference
    but I finally got the Pop up window saying this device requires a Password. I entered the password and I can once again use the Airport Express as a remote speaker.

  • TS1398 On my ipod, it shows that it's connected to a wifi network but when i try to open safari, it does not work

    On the wifi settings it shows that my ipod is connected to a network, but when I try to open safari it does not open it, because it says its not connected to wifi

    You may not really be connected to your WiFi network.
    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • Why to I FREQUENTLY have to reload my page to get hot links to work? Andmy keyboard frquently does not register key strokes, particularly the space bar.

    Why to I FREQUENTLY have to reload my page to get hot links to work? Andmy keyboard frquently does not register key strokes, particularly the space bar.

    # Right-click an empty area of the tab bar and choose Customize.
    # Click the Restore Defaults button, then the Exit Customize button.
    # If you don't already have it, install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
    # Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
    # Next to Classic Theme Restorer, click the Options button.
    # On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
    # Right-click an empty area of the tab bar and choose Customize.
    # Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
    # Click the Exit Customize button in the lower right corner when done.
    That being said, I should point out that you can reload pages in other ways.
    * Right-click any tab and choose Reload.
    * Right-click an empty area of the page and choose Reload.
    * Press F5.
    * Press Ctrl+R (Mac: Command+R).

  • I have a brought cd that is in the store but when i go to import it it does not allow says to have to manually type heaps of songs. there are cds saying the same!

    i have a brought cd that is in the itunes store but when i go to add to to my list is says not on net data base. my own copy i brought! how do i solve it i do not want to type over 50 songs in to computer.

    Hi dones49,
    It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
    To find the file, use the information in this article to navigate through the iTunes media folders -
    Locate and organize your iTunes files
    If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
    Download past purchases
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Using JDIC opens Outlook But When I click on send email email does not send

    Hi to every one plz help me.
    I have used JDIC and when i open outlook through Desktop.mail(message);
    outlook express gets open but when i click on send email then email does not get send undelivered message comes even though i have tried to send the email on the same address by manually opening outlook with coding then there is no problem for sending email.
    here is the error come in inbox after pressing send button.
    Your message did not reach some or all of the intended recipients.
          Subject:     COSMOS
          Sent:     9/15/2008 2:12 PM
    The following recipient(s) could not be reached:
          '[email protected]' on 9/15/2008 2:12 PM
                None of your e-mail accounts could send to this recipient.Thanks
    ABid

    by using SMTP before email address problem solved
    SMTP:[email protected]
    but is there any other way to solve this problem please reply me thanks.

  • I have firfox installed on computer but when i double click on it it does not open or does not load

    i had issue with windows so i hit restore to put computer back to earlier point to fix problem i tried to open firefox and it would not load or open up

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • When atemping to use wifi hotspots FireFox does not redirect to login page.

    when trying to use a hot spot like in a hotel or airport (tmoble for one) will not redirect to login page. Nor can it find the page when I enter the DNS name. If I enter the IP address of the long in page then it can find it but not the subsequent pages that it calls by DNS.
    == URL of affected sites ==
    http://

    I am a Hotspot ISP and I am having this issue with Firefox on Linux devices. We use Colubris MSC-3300 as access controllers tied to a RADIUS server. Have tested all other browsers on Windows and Linux and they seem to work correctly, problem seems to be tied to Firefox on Linux (testing with Ubuntu 11.04). When I open Firefox the redirect to captive portal page works correcty. I enter my username and password and when it tries to send this information back to the controller I get a "connection was interrupted" error. I have gone into Preferences and turned everything off and/or on and still can't get this device to log in.

  • Emailed movie I made on Iphone 4/ios6 views/runs correctly on QuickTime on my pc, but when viewing on Iphone in emails sent does not. Any clue?

    Made a bithday greeting in four 9 second segments for a relative. Edited in QuickTime as one 36 second movie.
    Emailed and views/runs correctly when I open up sent in email on my PC, but when viewing same (sent) on I phone only shows first segment and balance of time (27 seconds) last frame of first segment.

    I have got an E72 but I still find that most of the apps on the OviStore are of no use.
    Practically it is better to spend time on internet for s60 apps that look into the ovi store.
    Also I am not able to find the Advanced Communication s/w that came free with my E72 in ovi store ... 

  • When my home page loads on igoogle it shows my gmail in the hoem page box but when I actually get into gmail it does not load the current emails

    I have gmail preloaded in a section of my google home page. But when I click on the gmail link itself it only posts email from a few days ago when this started and does not show any of the newer emails

    I'm not sure what you try to do.<br />
    If you type or paste http://odb.org/ in the location bar then that website should open.
    Only if you use the https: protocol then encryption is used and the technical info will show that like you see with this website (Verified by Equifax).
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • I'm trying to restore my sons 5th generation ipod. When I try to do so it tells me find my ipod is turned on and he must shut it off in order to restore. But there is one big problem. He does not know his apple id or icloud password.

    Like the title says. When I turn it on it goes to setup. Then I select my country, then ask me to connect to wifi or to a computer. Then after a screen appears with a title " Activate iPod" then below it says exactly "This ipod is currently linked to an apple id (the apple id) Sign in with the apple id that was used to set up this ipod" Then below that is says message from the owner  saying "we have permission to call the police" What can I do to get it back to normal. My son does not remember any usernames or passwords as he probably entered them in at random when first setting it up. Any help would be much appreciated! Thanks! Also I am not to sure what ios 7 version is operating, I know it is ios7.

    You have to enter the Apple ID and password. You are running into the Activation Lock
    iCloud: Find My iPhone Activation Lock in iOS 7
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

  • I get my messages, it shows that there are 6 int he inbox, but when i click to see them, nothing shows up. wherever i click, nothing gets available to read.

    I hit get new mail from pop.gmail. it shows that it is getting the new messages. but when i try to open inbox, nothing shows up. so frustrating.

    Please make sure your settings are correct [http://kb.mozillazine.org/Using_Gmail_with_Thunderbird_and_Mozilla_Suite Mozillazine: Using Gmail with Thunderbird]
    You can also try to right click on the folder of emails and click Properties > General Information > "Repair Folder".

Maybe you are looking for

  • Can't remove video from iPhoto/iMovie'11

    Help! I have an old video that shows up everytime I start iMovie'11, and I don't seem to be able to get rid of it. It shows up under the iPhoto video Library, but it doesn't show up at all in iPhoto so I am unable to delete it. I managed to locate it

  • VHS TO FCP TO QT NOW NEED AVI HIGH QUALITY

    We have a two minute segment given to use in vhs format (poor quality) to begin with. I imported into FCP 4 and exported high qual quicktime and it plays & looks okay on both mac and pc. However, we need to insert video into powerpoint on pc. I'm hav

  • Exception at setting message priority email messaging driver

    hi guys, i have a email polling process. and some times at the WLS console i get this exception <21 Mei 13 10:31:46> <Error> <oracle.sdp.messaging.driver.email> <SDP-25700> <An unexpected exception was caught. java.lang.NumberFormatException: For inp

  • LaqbVIEW 7.1.1 does not find a specific breakpoint, but stops execution there

    Hi all, I've got a small test LV7.11 Vi that opens one of a set of data files and loads it into a FG. It is a flat sequence structure containing the code. Works OK. Some hours ago I debug'd this using breakpoints. I've run into a situation, where the

  • EQL query via WS

    Hi there, This is a follow-up on a previous thread in the forum: EQL Query in Conversation WS As the thread mentions, I am able to submit a WS request using the structure defined in the thread to make an EQL query and return the results. However, whe