HT4111 Ipad 3 wifi performance very poor whilst using Bluetooth headsets

Anyone else noticing iPad 3 wifi performance slows down significantly whilst using Bluetooth stereo headphones? I can't even stream from YouTube or NBA.tv if I'm paired with Bluetooth headphone ( tried two different headphones). I can switch between Bluetooth and iPad speaker and watch the speed and performance increase instantly. I have and iPad 2 and it does not do this.

Try change the WiFi channel e.g. channel 1, 6, or 11

Similar Messages

My ipad is not recocanize my iPod using Bluetooth,but both devices are recoconizing some other devices

My ipad is not recocanize my iPod using Bluetooth,but both devices are recoconizing some other devices

You have stated an issue, but you have not stated what you are trying to accomplish.
Repeating the same question and expecting a different answer is questionable.
Robert

IPad update to 4.3.5 wifi connection very poor

I have a iPad wifi 3G. The wifi connection use to be fine but after I updated to the 4.3.5 the connection became very unstable. It usually auto disconnect every 5 mins and will back to normal in 2 mins. it was very frustrated especially when I am watching YouTube
If anybody know the cause and solution plz reply under will be much apperciated
Regards

Tap Settings / General / Reset / Reset Network Settings.
If that didn't help try here > iOS: Troubleshooting Wi-Fi networks and connections

My apple new apple ipad wifi connectivity is poor

hi presently iam using latest ipad. i observed its wifi connectivity is poor. when try to connect ipad via wifi it is taking lot of time some times not getting coneect if the signal is poor, while my laptop, my phone and my ipod were connecting very fast. is their any solution.

If your router is dual-band, try ensuring that the SSID is different for the 5GHz band from the 2.4GHz one.
If sounds like your other devices which have no issue would all be 2.4GHz only.
If this is the case, try updating your router firmware - latest can firmware can make it easier for dual-band devices to connect firmly to the router without 'hunting' between signals of similar strength from the two bands from the same router.

Macbook pro performing very poor due to Yosemite

Hi,
I bought macbook pro 2012 model just 10 days back. Unfortunately i got yosemite preinstalled. My macbook pro is performing very very poor now .. Please help me in this regard
Problem description:
Very slow performance
EtreCheck version: 2.1.5 (108)
Report generated 12 January 2015 8:06:38 pm IST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 3 days 1:6:20
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.89 GB (428.37 GB free)
Core Storage: disk0s2 499.25 GB Online
HL-DT-ST DVDRW GS41N
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 6
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.driver.LogJoystick (2.0 - SDK 10.9) [Support]
[loaded] com.logitech.driver.LogiGamingMouseFilter (1 - SDK 10.9) [Support]
Startup Items: ℹ️
MySQLCOM: Path: /Library/StartupItems/MySQLCOM
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[killed] com.apple.bird.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.pluginkit.pkd.plist
[killed] com.apple.rcd.plist
[killed] com.apple.recentsd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.spindump_agent.plist
15 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.corestorage.corestoragehelperd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.diagnosticd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.spindump.plist
[killed] com.apple.systemstats.analysis.plist
[killed] com.apple.wdhelper.plist
16 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.teamviewer.Helper.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.valvesoftware.steamclean.plist [Support]
User Login Items: ℹ️
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Searchme [Cached] Adware! [Remove]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
MySQL [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
 5% WindowServer
 0% fontd
 0% smcFanControl
 0% AppleSpell
 0% Google Chrome
Top Processes by Memory: ℹ️
408 MB com.apple.SpeechRecognitionCore.speechrecognitiond
133 MB Google Chrome
120 MB Skype
86 MB loginwindow
77 MB Pages
Virtual Memory Information: ℹ️
51 MB Free RAM
1.30 GB Active RAM
1.22 GB Inactive RAM
773 MB Wired RAM
45.09 GB Page-ins
646 MB Page-outs
Diagnostics Information: ℹ️
Jan 12, 2015, 01:11:20 PM /Users/[redacted]/Library/Logs/DiagnosticReports/httpd_2015-01-12-131120_[redac ted].crash
Jan 12, 2015, 01:06:00 PM /Users/[redacted]/Library/Logs/DiagnosticReports/httpd_2015-01-12-130600_[redac ted].crash
Jan 11, 2015, 11:11:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/httpd_2015-01-11-231116_[redac ted].crash
Jan 11, 2015, 11:09:03 PM /Users/[redacted]/Library/Logs/DiagnosticReports/httpd_2015-01-11-230903_[redac ted].crash

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
 OS X 10.7 or later was installed by the previous owner
 The startup volume was encrypted with FileVault
 You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Dreamweaver CS6 performs very slowly when using Bootstrap

I'm working with a Bootstrap template that includes alot of JavaScript and CSS files, and Dreamweaver CS6 performs EXTREMELY SLOWLY when working with this site.
It takes a few seconds to be able to scroll, especially when working in "Split" view, and everytime I want to Preview the page in a browser I must save the file and then wait 2-5 seconds for the save to complete before I hit Preview or else Dreamweaver will crash.
I've checked for updates to Dreamweaver CS6 but my copy seems to be up-to-date.
Any suggestions?

Dreamweaver performs very slowly.
This depends on a number of factors.
The operating system - apparently the latest version of Mac OS causes all sorts of problems
Processor
RAM
Disk space
External links to scripts and style sheets
In my case, I do not have a problem other than the normal ones
Windows 8.1
i7
16GB
2T
local files

HT4111 Using Bluetooth headset with my ipad

I want to use my bluetooth headset to listen to itunes or othe apps with sound on my ipad. Can I listen to things from my ipad through my bluetooth headset?

Thanks for the link, I found this in my search but it does not seem to help me with the problem I am having which is this (quoted from a previous post):
"It shows that it is connected in Settings. I put the device in my ear (with it on) and start up itunes but am hearing it through my ipad speakers not the headset. I push the call button on my bluetooth headset and it comes up with Siri on my ipad wanting me to ask a question. I am hearing her through the headset though but nothing else seems to play through the headset."

OCI Performance Very Poor

I've been experimenting with using
OCI in the Proc Precompiler with
some user defined object types and
varrays. In fact, my code is
essentially the RESET example for
collections in Chap 18 of the "Pro C/C++
Precompiler Programmer's Guide" with
names changed. I tested this code
alongside a similar test using traditional
non object-oriented tables.
The results so far have shown that
the performance of the code which simply
fetches and updates the data, is significantly better with the traditional
method than the one using OCI. In fact,
I cannot find a data configuration in
which using varrays and object types
even comes close to the speed on the
traditional methods.
Has anyone noticed performance hits or
improvements using OCI, object types,
or collections? It would seem odd that
Oracle would spend so much effort to
promote this technology if there was no
performance improvement at all. In fact,
I'm showing that using the collections and object types is 20 times slower! Yikes!
Any feedback on this would be much appreciated.
Thanks,
Kristi Uthoff

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
If it still happens with a new, unmodified, Firefox profile then maybe security software is causing the problems and you should check that. 
You can also do a malware check. 
See "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

I cann't connect ipad with my windows 7 laptop using bluetooth

I cann't connect ipad with my windows 7 laptop using bluetooth

for what purpos as you cant sync or transfer files using bluetooth
on ios devices
this is the profiles the ios devices support
http://support.apple.com/kb/HT3647

Wifi degrades when using Bluetooth headset

I've noticed that when I use my Bluetooth headset (Sony Ericsson HBH PV-700) with my iPhone, the wifi (airport extreme) degrades or stops working. If I switch back to speakerphone or iPhone, them wifi starts working again. The PV-700 is only Bluetooth 1.1... perhaps iPhone requires 2.0 ?

k.alexander - thanks for posting. It's a relief to hear that another headset exhibits the same issue. Alas, it's also disappointing. The thing I most wanted to do with my iPhone was talk using Bluetooth and surf using wifi. I'm guessing it’s a proximity issue - both the Bluetooth and the wifi signals are emitted from the phone at the bottom through the black plastic. I upgraded to the iPhone from a Sony Ericcson z525a. I had no issues using Bluetooth to talk on it while simultaneously surfing on a laptop connected via wifi. Hopefully the Apple Bluetooth headset will be designed to get around this apparent limitation…
eMac 1 GHz Mac OS X (10.4.10)

Use bluetooth headset

Can you use a bluetooth headset for Skype calls while on a wireless WIFI connection? I was attempting that kind of connection and could not get it to work.

Go to Bluetooth in System Preferences and choose to pair a new device. When the Bluetooth Setup Assistant starts it will ask what type of device you would like to set up. Choose Headset. The assistant will set up yourhead set and creat sound input and output channels for that device. From there you either set up your software to stream to your headset, or go to Sound in System Preferences to set input and output through the headset. Just rmember to switch Sound preferences back after if you do it the second way. That way iTunes and other programs that use shound won't try to play through your bluetooth headset.

CANT USE BLUETOOTH HEADSET AS AUDIO DEVICE

I just got a bluetooth headset today, paired it with my imac, went into teh sound settings, then selected it as my audio input and output device. was working fine all day then all of a sudden it stopped working and no matter what i do it will not show up in the sound setting to let me choose it as a audio device.
It does however show up in bluetooth prefences as connected/paired etc. what can i do to fix this? i am on 10.4.2 with all the latest updates and have the 20" imac.
thanks

I am experiencing this problem also. Strangely, I had my headset working properly, with no problems at all. Then, for no reason, the headset stopped working. I switched to another bluetooth headset and the new one worked properly. I also used a third headset, but it seems that the system is not properly clearing information about each headset. Now none work at all.
I have deleted all from bluetooth preferences, repaired one. The pairing appears to work properly, but the headset never shows up in the Audio section of System Preferences and cannot be used with Skype. I am at my wits end. I have repaired preferences. Shut down and restarted. Reinstalled Skype. Trashed Skype preferences. You name it I have tried it. I cannot get any of my 3 bluetooth headsets working now.
Please someone help.

Fm radio while using bluetooth headset

Hi folks
How do I listen to the fm radio while using bt headset ?
I must be a lucky one as my bh 505 headset is still going after around 9 months. I do keep it under my car sunvisor so maybe it gets dried out. Impressive sound, better bass and volume than standard headet. Bh 505 battery will last longer than 8 hrs continuos play at work.
Don

You need a wired headset to listen to the radio.
I saw a post the other day on this forum of a guy who claimed to get fm reception using just a male 3.5mm connector.
It makes me wonder if you can use a wire with a connector from old headphones cut to a certain length just to receive the radio wave and play via bluetooth.
I think it's about time Nokia made an antenna for the radios to give us more options.
Show your appreciation. Hit that kudos button real hard

Use Bluetooth headset during audio playback

When I listen to an audio file, the audio plays on my iPhone external speakers. I want to change this to my Bluetooth headset (which I use quite often for the phone app), but I don't see any way to do this. Any ideas?

I'm assuming
I would look at the directions for my headset to find out?

Use Bluetooth headset with Shuffle?

Is there anyway I can use a Bluetooth headset with my latest generation iPod shuffle?

There is no built-in Bluetooth, obviously, but I suppose it is technically possible if you plug in a Bluetooth transmitter like this one
http://www.iogear.com/product/GBMA211W6/
which works with anything that outputs audio through a mini-stereo jack. It might look somewhat rediculous with a tiny iPod shuffle connected.
It might be better to get something like this
http://www.arriva.com/shuffle/index.html
where the shuffle becomes part of the headset, with no cord in between.

HT4111 Ipad 3 wifi performance very poor whilst using Bluetooth headsets

Similar Messages

Maybe you are looking for