HT4113 Can't figure out pass code and keeps disabling? How do I reset this?

Can't figure out pass code and keeps disabling? How do I reset this?

If you can't figure it out, you'll have to force recovery mode and restore the device.
Follow the steps in this article:
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212

Similar Messages

My iPad is disabled. i connected it to the iTunes, but the iTunes couldn't access it; because the iPad has a pass code. i can't enter the pass code in the disabled iPad! do you have any suggestions?

my iPad is disabled.
i connected it to the iTunes, but the iTunes couldn't access it; because the iPad has a pass code.
i can't enter the pass code in the disabled iPad!
do you have any suggestions?

You can unlock it on another computer though the content will be wiped and I think that you need to put it into DFU mode e.g. see post https://discussions.apple.com/message/15385719#15385719 in thread https://discussions.apple.com/message/15385641#15385641 .
From http://support.apple.com/kb/HT1212 :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

I can't remember my pass code and no longer have the computer my iPad was synced too

I can't remember my pass code. I've tyres to restore to factory settings but I no longer have the computer my iPad was synced too. Now my iPad is locked and I'm stuck.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

HT1212 my daughter set a pass code and forgot it how can i turn it on

ipad locked out after daughter put a pass code and forgoy it

Restore it http://support.apple.com/kb/HT1212
If it ask for the passcode when restoring, the last thing to do is take it to a apple store where they have unlimited access to all apple device restores without any passcode verification

I can't figure out why my IPad keeps crashing.

It's not pages I'm worried about It's my app that I just downloaded and every time I try to open it, it shows me a sponsor or it turns black than crashes.
I have closed all running apps and powered off.
I also delete it and rebooted it.
Please help.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
 Cheers, Tom

I'd like to configure my MacBook Pro so that I can use it both in English and Russian. How do I do this?

I'd like to be able to use my MacBook Pro for both Russian and English. How do I configure the notebook to do this?

John, are you perhaps already on Lion? I am a late adapter, so still on 10.6.8
I am not sure, whether I am able to put here a screen shot to help you ...
NO its not working :-(
But I am sceptic, that this will work. (I never saw pictures on this forum ... )
marek
Perhaps you drop me a message to my email?
Intelligence test: take the first letter of my first name "Marek" and then the four letters of my last name "Stepanek" then the at symbol, and podium international in one word, a dot with organisation top level domain

I restored my ipad today and i put in the passcode and now it is not letting me in and keeps disabling itself. i have reset it twice already and nothing has worked.

i have been trying to unlock my ipad for over an hour.i restored it today and have been putting in the passcode and it won't let me in. the passcode is right.

TRY FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

HT1212 hi cant get into my ipad and its disabled how do i do this

how do i unlock my ipad if disabled

Follow these instructions to resolve a forgotten passcode or a disabled iPad:
http://support.apple.com/kb/HT1212

Apex bug? Items being cleared in session state - can't figure out why

I have an item that is being submitted with a value but is then being overwritten and set to null. I can't see any reason why the submitted value is being overwritten with null.
I have been debugging this problem for most of the day and can't figure out what is happening and was hoping someone in the forum might be able to shed some light.
Some details:
The item is on Page 0, has source type of "PL/SQL Expression or Function", a source expression of "V('REQUEST')", and Source Used = "Always".
I viewed the HTML source of the rendered page and can see the following HTML, so I know the item has a value when the page is rendered:
<input type="hidden" id="RENDER_REQUEST" name="p_t08" value="EDIT" />
I have used Firebug to view the HTTP POST body and can see that p_t08 is being correctly submitted with a value of "EDIT" in the post body.
When I run the page in debug mode and then view the debug log, I see that Apex is indeed setting this item to null:
     0.01500     0.01600     A C C E P T: Request="WIZ_NEXT"
     0.23400     0.00000     Session State: Save form items and p_arg_values
     0.24900     0.01600     ...Session State: Save "BRANCH_TO_PAGE_ID" - saving same value: ""
     0.24900     0.00000     ...Session State: Save "ROWS_PER_PAGE" - saving same value: ""
     0.26500     0.01500     ...Session State: Save "P0_CLEAR_WS" - saving same value: ""
     0.26500     0.00000     ...Session State: Saved Item "RENDER_REQUEST" New Value=""
I can't figure out why the item is being set to null.
This problem also does not occur on every page. The pages in question are a multi-step "wizard" that allows the user to navigate between steps with "Next" and "Previous" buttons. Since this is a page 0 item, it appears on every page in the wizard so I'd expect it to behave the same. When you open the wizard at step 1 and press next to go to step 2, the item (RENDER_REQUEST) is set correctly on step 2 of the wizard, BUT when you then click Next to go to step 3, RENDER_REQUEST is null on step 3. If you open the wizard at step 2 and press Next, RENDER_REQUEST is null on step 3.
I did find a work around, but it doesn't make any sense why it would work: if I move the RENDER_REQUEST item from the "Footer Items" region to a page level item (by using Edit All and setting its region to blank), then the problem goes away. If I move it back to the "Footer Items" region the problem reoccurs.
I am working on Application Express 4.0.2.00.07 on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0.
Any help would be greatly appreciated!
Thank you.

Hi Patrick,
Thanks for the quick response. Unfortunately, I can't reproduce this on apex.oracle.com due because the app requires PL/SQL packages to be installed in several schemas, including some that require system grants (I gave a presentation at Oracle Open World a couple of years ago on some of the techniques I used in building this application that you attended; I think the session was called "Building Large Commercial Applications with Oracle Database 11g and Oracle Application Express").
Is there another way we can work together to debug this without reproducing it apex.oracle.com? For example, if you could send me an instrumented version of the APEX_040000.F procedure (or whatever procedure is clearing the session state) that has some additional APEX_APPLICATION.DEBUG calls, I could install it on my server, reproduce the error and send you the output.
Thank you,
Eric

Error message I can't figure out

Can anyone help with this problem: Whenever I try to save a video I created I get a file error:illegal name message. I can not figure out where the problem is or how to fix it. This occurs near the end of the saving process.
file name is final ceremony and reception 2-26-10

OSX has certain character strokes that are not to be used in file names. It's most likely the cause.
You can Google a full list.
Al

I have got 2 iPad Air one of it is not logging me in because I have forgotten the pass code and have logged out from iCloud by accident. Can you please help me to use my iPad.

HI
I have 2 IPads, I am unable to use one of it because I have forgotten my pass code and also logged out from iCloud accidentially. Can you please help me to solve this problem.
Cheers
Raveena

Follow the instructions on this page : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Can you single out an APP and put a pass code on it on the Iphone 4

Can you single out an APP and put a pass code onit on the Iphone 4

Very few apps will let you put a password for the app itself
Download Manager Lite ^
Video Downloader Lite/Pro ^

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Can't figure out what is the code

Hi
I got following macro that will help me to run certain transaction.
I just can't figure out where comments ends and where code starts so I was unable to run it for like 3 hours now.
In other words
I am trying to use Excel Macro that will get to active transaction in SAP and do waht I have recorded.
'SAPGUI Macro for updating SAP from Excel data 'Prerequisites: '1. Script Recording and Playback from the SAPGui must be enabled by admin '2. The Excel list must be set up from top left corner of a worksheet '3. The worksheet with data must be the active sheet '4. There is no error handling. Build it yourself! '5. The script will update the active (current) SAP transaction'Instructions for use 'Record a macro of your update actions. 'Paste the session.findById stuff between the <== and ==> markers'Edit the literal values and replace with Trim(CStr(objSheet.Cells(x, y).Value)) 'where x and y are the row and column counters'Open up your Excel sheet with data (row 1 is ignored here) 'Fire the macro! '===========BEGIN BOILERPLATE=================== REMSet up connection to the SAP screen: If Not IsObject(application) Then Set SapGuiAuto = GetObject("SAPGUI") Set application = SapGuiAuto.GetScriptingEngine End If If Not IsObject(connection) Then Set connection = application.Children(0) End If If Not IsObject(session) Then Setsession = connection.Children(0) End If If IsObject(WScript) Then WScript.ConnectObject session, "on" WScript.ConnectObject application, "on" End If REMSet up connection to the Excel data to be keyed into SAP: Dim objExcel Dim objSheet, intRow, i Set objExcel = GetObject(,"Excel.Application") Set objSheet = objExcel.ActiveWorkbook.ActiveSheet session.findById("wnd[0]").maximize
'===========END BOILERPLATE=====================
'REM Example: Mark material for deletion in Plant using MM06 For i = 2 to objSheet.UsedRange.Rows.Count 'Assuming there is a header rowREM Find a cell and put its value in: REM Note: The section of the Script shown below can be recorded ' and edited to pick data from the Excel sheetstrCN = Trim(CStr(objSheet.Cells(i, 1).Value)) strWerks = Trim(CStr(objSheet.Cells(i, 2).Value)) '<== session.findById("wnd[0]/usr/ctxtRM03G-MATNR").text = strCN session.findById("wnd[0]/usr/ctxtRM03G-WERKS").text = strWerks session.findById("wnd[0]/tbar[0]/btn[0]").press session.findById("wnd[0]/usr/chkRM03G-LVOMA").selected = false session.findById("wnd[0]/usr/chkRM03G-LVOWK").selected = truesession.findById("wnd[0]/tbar[0]/btn[11]").press 'session.findById("wnd[0]/tbar[0]/btn[0]").press '==> Next

Ok macro works and triggers actions from recorder. I was doing it with hope I will select data in SAP and paste in Excel AND/OR export file from SAP with data.
If I record select column and then copy it. Script is recorded until selection . It ignores copy (i tried use mouse right click and copy AND manual alt+F12 and then copy from context menu)
When I export recorder does open export window but does not writes the line relevant to clicking save.
I found such bits
'Choose the export format
session.findById("wnd[1]/usr/subSUBSCREEN_STEPLOOP:SAPLSPO5:0150/sub:SAPLSPO5:0150/radSPOPLI-SELFLAG[1,0]").select
session.findById("wnd[1]/tbar[0]/btn[0]").press
'Choose the export filename
session.findById("wnd[1]/usr/ctxtDY_FILENAME").text = "test.txt"
session.findById("wnd[1]/usr/ctxtDY_PATH").text = "C:\Temp\"
'Export the file
session.findById("wnd[1]/tbar[0]/btn[0]").press
But they dont seem to be relevant to my previous macro.
Any quick fix to get data out of Excel

Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!!

Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!! I don't have a credit card nor do they gove debit cards to foreigners here, or at least it's really hard so I'm using my bank at home and still have a debit there. My phone number is 8 numbers plus the country code which is strange! Another thing is I was given a phone email that I was told to use for texting but I'm not sure how that works!! It's so frustrating too because no one speaks English here and I'm not very tech savvy. God bless you if you can help :)

whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
If you are in japan, you need to use the japan app store

HT4113 Can't figure out pass code and keeps disabling? How do I reset this?

Similar Messages

Maybe you are looking for