HT4113 how to get passcode for ipod

how do i get the passcode for my sons ipod... he has forgotten it

You don't get the password. You either know it or you don't.
Put it in recovery mode - described here:
iOS: Unable to update or restore

Similar Messages

HT1689 how to get Appstore for iPod touch 1st generation?

How do I get Appstore for my iPod touch (1st generation)?

Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

How to get Quicktime for iPod touch

How to get Quicktime on an Ipod touch

You already have it.
It is built into the ios.
There is nothing to get.

How to get apps for ipod touch 3g

I have ipod touch 3g. Recently i have restored it without backing up. Other words, i lost all apps that i had. So, now i cannot install any apps because all of them have the newest IOS. Where can i find apps with old IOS for ipod 3g?
Thank you.

- First, yo really have a 2G iPod. A 2G can only go to 4.2.1 while a 3G can go to 5.1.1
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
For the apps you had:
Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
To find compatible apps:
VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
apps for ios 4.2.1: Apple Support Communities
Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
apps for 4.2.1 (also works for 3.1.3)
Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities

HT1430 how to recover forgotten passcode for ipod touch

How do I recover a forgotten passcode for iPod touch?

Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Backing up, updating, and restoring iOS software

My daughter forgot her passcode for ipod touch. What do we do?

My Daughther forgot her passcode for ipod touch. What can we do?

Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Re: how to get apps for iphone 3g 4.2.1

Re: how to get apps for iphone 3g 4.2.1 all apps support higher version help....
Sep 24, 2013 6:34 AM (in response to Rajmit)
I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.

I still have an old 3G which I use mostly as a ipod/radio. By accident I found you can overide the i-tunes block.
1. Select Apps in Apps store icon on the phone.
2. Choose App to download
3. At "Instal" button press it QUICKLY in blocks of 3 presses, keep doing this until it overides the i-tune warning, then if there were legacy versions for os 4.2.1 it says something like "this app is for os 5 or above", but gives you a choice to download an older version. Select this.
Sometimes it says the Apps is for newer hardware, requiring motion sensors, front camera's etc.. just got to accept these ones don't work on legacy hardware.
4. Download does not work for all Apps, esp. newer ones written after os 4.21 or if the developer doesn't have the vintage apps archived- e.g. Instagram downloads, but won't run (wants to update), or WSJ and Barrons stalls and goes through a download loop.
I am not making this up, as I bought this old 3g unit on e-bay, after a complete factory reset I now have:
- Tune-in, FB, Pandora,Skype, Twitter, Bloomberg, MSNBC, Forbes, Marketwatch, Viber, amongst a host of other news apps like LATimes.
Some Apps will download ok, and then at activation says its too old and no longer supported e.g Whats App.
Otherwise, good luck. Tune-in, Pandora, Skype and Twitter is all I need to keep me happy with an old unit, even though I've got newer hardware. Never let anything die unnaturally.

HT4113 How to find passcode?

How can I find a forgotten passcode for Ipod Touch 4th Generation with IOS 6? The Ipod Touch has been reset and will only go back to passcode screen one time. After that, the Ipod only shoes IOS 6 on the screen. The Ipod will not go to a red screen!
if anyone can help, please do???.....

You cannot.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New
Also, see iTunes- Restoring iOS software.

How to get Text for nodes in Tree Structure

Hi Friends,
How to get Text for nodes in Tree Structure
REPORT YFIIN_REP_TREE_STRUCTURE no standard page heading.
                   I N I T I A L I Z A T I O N
INITIALIZATION.
AUTHORITY-CHECK OBJECT 'ZPRCHK_NEW' :
                  ID 'YFIINICD' FIELD SY-TCODE.
IF SY-SUBRC NE 0.
    MESSAGE I000(yFI02) with SY-TCODE .
    LEAVE PROGRAM.
ENDIF.
class screen_init definition create private.
Public section
public section.
    class-methods init_screen.
    methods constructor.
Private section
private section.
    data: container1 type ref to cl_gui_custom_container,
          container2 type ref to cl_gui_custom_container,
          tree type ref to cl_gui_simple_tree.
    methods: fill_tree.
endclass.
Class for Handling Events
class screen_handler definition.
Public section
public section.
    methods: constructor importing container
               type ref to cl_gui_custom_container,
             handle_node_double_click
               for event node_double_click
               of cl_gui_simple_tree
               importing node_key .
Private section
private section.
endclass.
*&                        Classes implementation
class screen_init implementation.
*&                        Method INIT_SCREEN
method init_screen.
    data screen type ref to screen_init.
    create object screen.
endmethod.
*&                        Method CONSTRUCTOR
method constructor.
    data: events type cntl_simple_events,
          event like line of events,
          event_handler type ref to screen_handler.
    create object: container1 exporting container_name = 'CUSTOM_1',
                   tree exporting parent = container1
                     node_selection_mode =
            cl_gui_simple_tree=>node_sel_mode_multiple.
    create object: container2 exporting container_name = 'CUSTOM_2',
    event_handler exporting container = container2.
event-eventid = cl_gui_simple_tree=>eventid_node_double_click.
    event-appl_event = ' '.   "system event, does not trigger PAI
    append event to events.
    call method tree->set_registered_events
         exporting events = events.
    set handler event_handler->handle_node_double_click for tree.
     call method: me->fill_tree.
endmethod.
*&                        Method FILL_TREE
method fill_tree.
    data: node_table type table of abdemonode,
          node type abdemonode.
types:    begin of tree_node,
          folder(50) type c,
          tcode(60) type c,
          tcode1(60) type c,
          tcode2(60) type c,
          text(60) type c,
          text1(60) type c,
          text2(60) type c,
          end of tree_node.
data: wa_tree_node type tree_node,
            t_tree_node type table of tree_node.
wa_tree_node-folder = text-001.
wa_tree_node-tcode = text-002.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-003.
wa_tree_node-text1 = 'GR/IR aging'.
wa_tree_node-tcode2 = text-004.
wa_tree_node-text2 = 'Bank Balance'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-005.
wa_tree_node-tcode = text-006.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-007.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-008.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
wa_tree_node-folder = text-009.
wa_tree_node-tcode = text-010.
wa_tree_node-text = 'Creditors ageing'.
wa_tree_node-tcode1 = text-011.
wa_tree_node-text1 = 'Creditors ageing'.
wa_tree_node-tcode2 = text-012.
wa_tree_node-text2 = 'Creditors ageing'.
append wa_tree_node to t_tree_node.
clear wa_tree_node .
node-hidden = ' '.                 " All nodes are visible,
    node-disabled = ' '.               " selectable,
    node-isfolder = 'X'.                                    " a folder,
    node-expander = ' '.               " have no '+' sign forexpansion.
    loop at t_tree_node into wa_tree_node.
      at new folder.
        node-isfolder = 'X'.                      " a folder,
        node-node_key = wa_tree_node-folder.
               clear node-relatkey.
        clear node-relatship.
        node-text = wa_tree_node-folder.
        node-n_image =   ' '.
        node-exp_image = ' '.
        append node to node_table.
      endat.
     at new tcode .
        node-isfolder = ' '.                          " a folder,
        node-n_image =   '@CS@'.       "AV is the internal code
        node-exp_image = '@CS@'.       "for an airplane icon
        node-node_key = wa_tree_node-tcode.
         node-text = wa_tree_node-text .
                 node-relatkey = wa_tree_node-folder.
        node-relatship = cl_gui_simple_tree=>relat_last_child.
      endat.
      append node to node_table.
    at new tcode1 .
        node-isfolder = ' '.                          " a folder,
        node-n_image =   '@CS@'.       "AV is the internal code
        node-exp_image = '@CS@'.       "for an airplane icon
        node-node_key = wa_tree_node-tcode1.
                 node-relatkey = wa_tree_node-folder.
        node-relatship = cl_gui_simple_tree=>relat_last_child.
          node-text = wa_tree_node-text1.
     endat.
      append node to node_table.
       at new tcode2 .
        node-isfolder = ' '.                          " a folder,
        node-n_image =   '@CS@'.       "AV is the internal code
        node-exp_image = '@CS@'.       "for an airplane icon
        node-node_key = wa_tree_node-tcode2.
                 node-relatkey = wa_tree_node-folder.
        node-relatship = cl_gui_simple_tree=>relat_last_child.
        node-text = wa_tree_node-text2.
     endat.
      append node to node_table.
    endloop.
    call method tree->add_nodes
         exporting table_structure_name = 'ABDEMONODE'
                   node_table = node_table.
endmethod.
endclass.
*&                        Class implementation
class screen_handler implementation.
*&                        Method CONSTRUCTOR
method constructor.
   create object: HTML_VIEWER exporting PARENT = CONTAINER,
                  LIST_VIEWER exporting I_PARENT = CONTAINER.
endmethod.
*&                 Method HANDLE_NODE_DOUBLE_CLICK
method handle_node_double_click.
case node_key(12).
when 'Creditors'.
submit YFIIN_REP_CREADITORS_AGING via selection-screen and return.
when 'Vendor'.
submit YFIIN_REP_VENDOR_OUTSTANDING via selection-screen and return.
when 'Customer'.
submit YFIIN_REP_CUSTOMER_OUTSTANDING via selection-screen and
return.
when 'GR/IR'.
submit YFIIN_REP_GRIR_AGING via selection-screen and return.
when 'Acc_Doc_List'.
submit YFIIN_REP_ACCOUNTINGDOCLIST via selection-screen and return.
when 'Bank Bal'.
submit YFIIN_REP_BANKBALANCE via selection-screen and return.
when 'Ven_Cus_Dtl'.
submit YFIIN_REP_VENDORCUST_DETAIL via selection-screen and return.
when 'G/L_Open_Bal'.
submit YFIIN_REP_OPENINGBALANCE via selection-screen and return.
when 'Usr_Authn'.
submit YFIIN_REP_USERAUTHRIZATION via selection-screen and return.
endcase.
endmethod.
endclass.
Program execution ************************************************
load-of-program.
call screen 9001.
at selection-screen.
Dialog Modules PBO
*&      Module STATUS_9001 OUTPUT
      text
module status_9001 output.
set pf-status 'SCREEN_9001'.
set titlebar 'TIT_9001'.
call method screen_init=>init_screen.
endmodule.                 " STATUS_9001 OUTPUT
Dialog Modules PAI
*&      Module USER_COMMAND_9001 INPUT
      text
module user_command_9001 input.
endmodule.                 " USER_COMMAND_9001 INPUT
*&      Module exit_9001 INPUT
      text
module exit_9001 input.
case sy-ucomm.
when 'EXIT'.
set screen 0.
endcase.
endmodule.
        exit_9001 INPUT

you can read the table node_table with nody key value which imports when docubble click the the tree node (Double clifk event).
Regards,
Gopi .
Reward points if helpfull.

How to get classification for a given material and material type in MM

Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours Sincerely

Hi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok

How to get LASTDAY for each and every month between given dates..

Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friends

Here's a 8i solution :
select add_months(
         trunc(
           to_date('12-01-2011','DD-MM-YYYY')
         ,'MM'
       , rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
                                  trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
   trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
   trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

[JS][CS3]how to get refrence for source file

Hi All
I am new and learning javascript Gradually Could any one help on this as i do have a code for load style but don't know how to get refrence for "source file" and "targetDoc"
targetDoc.importStyles(charImport, sourceFile, clashPolicy);
targetDoc.importStyles(paraImport, sourceFile, clashPolicy);
Can any one figure it out
Many Thanks

I'm not sure what you are trying to achieve, could you please elaborate?
Do you want to load all the styles from one document into all 100 documents, or do you want all the styles from the 100 documents into 1 document or what is the goal?
The following will let you choose a folder of files, open each of the files in it and import the styles from source document. It is not a complete script, make sure to test and modify before running on anything else than test files :-)
var MyFolderWithFiles = Folder.selectDialog ("Choose a folder");
var sourceFile = File.openDialog("Choose the styles source");
var myFiles = MyFolderWithFiles.getFiles("*.indd");
for(i = 0; i < myFiles.length; i++) {
    theFile = myFiles[i];
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
    var targetDoc = app.open(theFile, true);
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
    targetDoc.importStyles(ImportFormat.CHARACTER_STYLES_FORMAT, sourceFile, GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
    targetDoc.importStyles(ImportFormat.PARAGRAPH_STYLES_FORMAT, sourceFile, GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
    targetDoc.close(SaveOptions.YES);
Thomas B. Nielsen
http://www.lund-co.dk

I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

You need to contact Adobe Customer Support :
They will check and assist you. (Live Chat)
Contact Customer Care

How to remove passcode from ipod touch 3g if power botton is not working?

how to remove passcode from ipod touch 3g if power botton is not working?

Use this program to place the iPod in recovery mode so that you then can restore the iPod via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode

HT4113 how to get passcode for ipod

Similar Messages

Maybe you are looking for