HT4113 ipad is disabled and i have connect to itunes. but when i connected to my computer, its not sinc automatically , so how can i restore it ?
ipad is disabled and i had connect to itunes. but when i connected to my computer, its not sinc automatically , still ask me to enter the pascode first. so how can i restore my ipad ? seems my laptop didnt know or never get sinc with my ipad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
Similar Messages
-
my iphone is disabled. it prompted me to connect to itunes but when i connected to itunes... it will just say cant detect iphone because it needs to unlocked. how can i unlocked if theres no way to unlock it? pls advise. ty!
Hey aldrichangel!
Here is an article that has a few suggestions for you that will help you unlock your phone:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
My iPad is disabled, connect to iTune, but when i connect to iTune, iTune showing to allow access please respond on iPad. but in long time it is not showing on device list of iTunes.
can any one help me.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
~~~~~~~~~~~~~
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
windows 8.1 itunes wont recognize ipad
https://discussions.apple.com/thread/5697247?start=0&tstart=0
Look at the solution in this link
https://discussions.apple.com/thread/5697247?start=75&tstart=0
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
Cheers, Tom -
My ipad 4 is in recovery mode and says connect to itunes, but when i connect to itunes it says nothing. but in the device driver properties on my computer it says my ipad is in recovery mode. what should i do?
please help!See: http://support.apple.com/kb/HT1808 to restore the phone using Recovery Mode. You will lose all content on the phone. This is the only way to bypass the lock screen if you don't have the last computer the phone was synced to.
-
Today was my ipod disabled. it says I need to connect to iTunes, but when I connect it brings up an error message that says I have to enter code but my problem is that I forgot the code!!!!
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My iPod Touch 5th generation says disabled connect to itunes but when we connect to itunes it says on itunes that the ipod is locked with a passcode and to go onto the ipod and type in the passcode to proceed but the ipod is still locked. what do i do?
http://support.apple.com/kb/HT1212
-
Hello,
I have a ipad 1 with me which is saying connect to itunes but when I connect to my laptop for itunes, ipad does not show up on itunes and ipad does not start also....
AbhishekTry recovery mode now.
iOS: Unable to update or restore - Apple - Support -
my ipod says "ipod disabled connect to itunes" but when i connect it says i have to connect to itunes bu twhen i connect it say i have to unlock it first but there is no option to unlock it the slide bar is gone what do i do?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My Ipod is locked since my daughter tried too many times trying to put the password. Now it says " iPod is disabled" connect to iTunes, but when I connect to iTunes it says "Please enter the password to access"
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
iphone 4 is not recognized by itunes and is only on emergency mode, keeps telling me to connect to itunes but when I connect iphone to computer it does not recognize it
Did you try recovery mode? Hold down the home button as you connect it to iTunes. iTunes should pop up a window that says "iTunes has detected a device in recovery mode" and give you the option to restore.
-
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
-
My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.
Are you running the most recent version of iTunes for Windows on your PC? You may be running an older version that is incompatible with the 4s.
Hope this helps -
hi, i have to reset an ipad from work which belonged to another employee. It says on the screen that it is disabled and connect to itunes but when i try to connect it says error i need the passcode, can anyone help?
You have to use recovery mode which will totally erase the iPad. Read here.
iPad: Unable to update or restore - Support - Apple -
ipod touch is saying it is disabled and to connect to itunes but when i do it asks for a password ?
copied from iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document. -
My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Can not view Maps in the BB Maps App
I have curve 3G 9300, I have my BBM service active & downloaded BB maps on my phone. The GPS tracks my location but It does not display a map but just a grey patch of land. Can anyone help me out?
-
Where is the file "sun-resources.xml"?
I tried out this example once, http://www.netbeans.org/kb/60/javaee/ejb30.html Then I removed this project from Netbeans. Today when I want to play with this example again, I found there is already an existing "Server Destinations" when I want to cre
-
Issue with Backup NNHOP TE Tunnel with Auto-Tunnel Backup !
Hi All I am trying to implement NNHOP Backup Tunnel(Manual) to achieve Node Protection. The Network Topology is attached along with. I am using TE Auto-Tunnel to achieve Link Protection via Dynamic Backup Tunnels. I am building NNHOP Tunnel from core
-
JTabbed Pane not displaying title
Hi Friends, I am developing a desktop application using swing components in Netbeans IDE 6.7.1. I have added a jtabbedpane inside another jtabbedpane. Each has individual titles. The inner one has 3 tabs. In preview mode all are displaying the titles
-
My MG3100 series wifi printing is not working.
the blue light is on and it will scan but when i try to print i get the error message printer not responding. This is not a new printer and we have had it working wireless at all times previously.