HT4113 my ipad is lock and ask me to connect to Itunes.

Hi,
Im having trouble with my ipad...i forgot the password and enter so many times,that now is asking me to connect to itune.what should I do to unlock my ipad?

iOS: Wrong passcode results in red disabled screen - http://support.apple.com/kb/ht1212 - entering wrong codes results in progressively longer lockout times until device must be restored completely.
Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

Similar Messages

  • My iPad is locked and it says to connect to iTunes, and iTunes will not let me connect.

    My iPad is locked and it says to connect to iTunes, and iTunes will not let ,me connect.

    Try this:
    1. Go to Settings>General>Date and Time>Set Automatically>Off
    2. Set the date ahead by a few months
    3. You should then be able to connect to the store

  • TS2634 ipad screen lock and ask for passcode

    my ipad screen lock and ask for passcode, which i don't remember. my kid change the passcode.  Aslo, it talks for passcode 4 values require.
    Is there any reslove for this issue?? Thank you.

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My ipad is locked and i have to connect it to itunes

    my ipad is locked and i have to connect it to itunes but now itunes wont accept it unless i unlock the ipad but i can't, what do i do?

    I have no clue what you're talking about.  Perhaps you can rephrase with correct spelling and real sentences that include initial caps and periods and other grammatical niceties.

  • My phone is on disable and ask me to connect to itunes and when i try it says i need to unlock my phone? how can i unlock it if its locked ?

    my phone is on disable and ask me to connect to itunes and when i try it says i need to unlock my phone? how can i unlock it if its locked ? please help?

    Connect in recovery mode according to http://support.apple.com/kb/HT1212

  • My ipad 2 suddenly shut off and asked me to connect to itunes it asks me to restore but it wont work need help pls

    my ipad 2 suddenly shut off and asked me to connect to itunes it asks me to restore but it wont work need help pls

    The iPad is telling you it has entered the recovery mode - you need to follow the instructions in http://support.apple.com/kb/HT1212 for connecting to a computer running iTunes by way of the recovery mode.

  • HT4623 My IPad is locked and shows that Please connect iTunes since iPad has been stopped to be used. How should I unlock it?

    My iPad is locked and shows that Please connect iTunes since iPad has been stopped to be used. How to unlock it?

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • HT1766 what do i do when my phone is locked and it says to connect to itunes?

    what do i do when my phone is locked and it says to connect to itunes?

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • When I downloaded ios 7.0.2 to my iPad 2 it's asking me to connect to iTunes

    After I downloaded ios 7.0.2 to my iPad 2 it's asking me to connect to iTunes, but I have never connected this iPad to iTunes. I tried turning it on and off, but it won't do anything until I connect to iTunes. I'm concerned based on some other questions that this is going to erase everything and make me start again. I believe I have a back up in iCloud, but I don't know if I've backed up since upgrading to ios 7. Is there anything I can do besides connect to iTunes and see where it takes me?

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
     Cheers, Tom

  • My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

    My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

    Try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Last, try restoring on another computer.

  • My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...

    My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...

    Those Links are working here...
    Try this one,
    iPad Unable to Update or Restore
    http://support.apple.com/kb/ht4097

  • My ipad is disabled and i have to connect to itunes what do i do

    my ipad is disabled and i have to connect to itunes what do i do

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • HT1689 My phone was locked and it says to connect to iTunes

    My phone was locked and it says to connect to iTunes, what do I do to restore my iPhone and unlock it

    Restore the iphone
    iPhone User Guide (For iOS 6 Software)

  • My iPad is disabled and it says to connect to iTunes with my Mac. Its not working. How can I get my iPad to work?

    My iPad is  disabled and it says to connect to ITunes with my Mac. It still is not working.

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • IPhone displays a USB connector image and asks to be connected to iTunes?

    Hi
    On three occasions now when I have turned my iPhone on it has displayed a USB connector image on screen and asks to be connected to itunes? If I turn it off and then on again it works normally but I get a message "iPhone activated".
    Is this something I am doing wrong or is this a 'glitch'?
    Phil Tyler

    I think it is a glitch of some sort. That happens to me every once in a while and it goes away after I reboot my phone.. I have 2.1 still on my phone.. Hope this helps.

Maybe you are looking for

  • Does iTunes/iPhone Backup backup Application settings?

    Hi guys, it happened to me to buy a new MAC and transferring my purchased Application to the new computer via my iPhone; it happened to me to buy a new iPhone and sync my iTunes with it... in both cases I kept my Apps setting. The question is: does t

  • Needs to remove Balnk spaces in the report next to data

    Dear SDN's, Report is displaying as below,my end user wants to remove blank spaces which has no data. Ex: In C1 sales is 10,but profit is blank.so profit wont be display for C1.Similar for C2 sales wont be displayed & profit shoud display. Customer  

  • Why are the rules not working correctly?

    I have a rule, for example, that recognizes emails coming From: my address (a copy coming in from a forum) and also To: the forum address. It does 3 things to the message: 1. puts in on a folder in Mail (folder created for that purpose). 2. puts back

  • HT204053 i forgot my answer security questions.

    I forgot my security question is not how to change in order to purchase my mac pc

  • Usage of an xsl in xi ?

    Hi I need to create a message type  and the informstion that i have is the documentation of the fields (elements) for that message , it is really very complex and big one. I also have an xsl , how this could help me building my message type? Thanks