HT4113 my power button does not work to power down phone. there for leading to the unablility of reseeting phone

please need help need to reset my iphoe but power button is broken and on a new computer. what do i do

You can also make a Genius Bar appointment at your nearest Apple Store and have it replaced under your warranty.

Similar Messages

Froze on black screen and power button does not work

my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
any suggestions would be appreciated

- iOS: Not responding or does not turn on
Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

The power button does not work

i recently noticed that my original iphone power button does not work i push but nothing happens. I know that i have to fix but the problems is that the warranty is been over for long i need to know a good place to repair because the apple people said they could not fix it. I live in Texas so somewhere close would be nice.

This link is for one 3rd party repair service you can contact for the first generation iPhone and for the iPhone 3G, which is located in Dallas.
http://www.drcellphone.com/iphone-repair-service.php
http://www.drcellphone.com/iphone2g.php

My iphone4 power button does not work can i take it into apple store would they replace it with a new iphone or whats the deal?

My iphone 4 power button does not work can i take it into apple store and replace it or what are some options

Assuming it is out of warranty Apple Genius bar will exchange for an out-of -warranty replacement unit identical to the to donor
In US $149 for in iPhone 4

Lenovo V570 Laptop Power Button does not work. Did I screw it up?

Hi, my Lenovo V570 keyboard recently stopped working so I took the keyboard off to reposition the cable. In the process I disconnected another cable on the motherboard (shown in the pictures below). I also cant find the black plastic piece that was holding it down.
Now not only does the keyboard not work but the power button does nothing. After research though Ifound out this laptop is notorius for having the power button go bad.
When I plug in the AC adapter I do see the battery light go on and it charges so I dont think the motherboard is bad. I
have tried every trick in the book as far as getting static out of the laptop power button (holding down power button for
certain times). I looked at the mainteneance manual for this laptop and could not figure out what the disconnected cable does. I have tried reconnecting the cable without the plastic piece but that did not work.
Is the disconnected cable responsible for this or should I order a new power button board with cable?
Link to image 1
Link to image 2
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Hi Deziant,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with power button not working in your V570 laptop.
As per the snap shot which you have shared it looks like the black support connector is broken, you can fix this cable by using a gum, but I would suggest you to visit nearest service center to fix this issue.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Is there a way to do a soft reset when the power button does not work?

After needing to enact my replacement repair warranty, I received a device (smae one and same serial) but the screen had unresponsive spoots, and dim spots, I decided to turn right around and send it back again. I got a replaced screen again, but this time my power button doesn't work. Now, this isn't too inconvenient for me except that I cant do a soft reset or power off/on in order to clear the cobwebs from time to time. Does anyone know of an app, or another way to do this? I'm simply afraaid of what iddues it may come back with if I send it in a 4th time.
So, App?
Or, maybe a special keybaord combo I can put in like on phones? (IE ##XXXXX#

To remove the Restrictions passcode, you need to restore the phone as a new device using iTunes. Hit the "Restore" button on the Summary Pane.

HT1212 i have a problem, my iphone is disabled and i can not get into it. the power button does not work and the computer i used before i do not have. icloud was not set up on it either. And it will not allow me to connect to my itunes. So what can i do t

i have read ur forgotten password or device disabled after entering wrong password. iphone is desabled dont have computer i conected it to before and power button is broke so how can i get back into my iphone?

You will have to restore the phone and set up as New. See: http://support.apple.com/kb/HT1212. The part you need is near the bottom, "If you have never synced your device with iTunes...". You will lose any content that is not backed up in iCloud.

HT2213 Holding the power button does not work

I've got a Mac Pro that stops recognizing my BD-ROM drive after it goes to sleep. I've been trying to reset the PRAM and NVRAM, per applecare's suggestion, but everytime I plug my Mac Pro in, it automatically starts up. I've turned off the "automatically restart" option in System Preferences, but it's as if all of that is stuck! So, I'm trying to reset the firmware using the firmware restoration CD, but when I hold down the "power" button, the computer's LED light flashes much more than three times, the computer gives a non-chime beep, then gives the chime, and then starts up using the Macintosh HD like I'm not holding down the power button.
Is there another way to get to the point where I can use the firmware restortaion CD? It's driving me crazy. I thought it was because I was plugged into an Uninteruptable Power Supply, but I plugged it into a normal power strip and there was no change.
Any help?

the computer's LED light flashes much more than three times, the computer gives a non-chime beep, then gives the chime, and then starts up
Here's the meaing of the POST chime sequences:
Power On Self-Test Beep Definition - Part 2
As for the power led, if it is a sequence of single flashes that none of the ram is being detected. If grouped in a sequence of 3 flashes then a single slot has failed.
Look inside your machine for any lit diagnostic leds.
Blow out any accumulated dust.
Reseat the video card.
I do not think firmware needs to be changed/updated/reinstalled.

After installing Mavericks, power button does not put my iMac to sleep.

After installing OS X Mavericks, the power button does not work as before, any help?
Thanks
Victor

CT, the behavior of the power button on Mavericks (10.9.2) is not as the note (OS X Mavericks: Using the power button - Support - Apple) describe. I have to press four or five times de power button in order to put the mac to sleep.

HT201401 How can i reset my iphone if the Sleep/Wake button does not work?

My camera shuts off every time that I try to take a picture. I would like to reset my IPhone in order to try and solve the problem. My Sleep/Wake button does not work.
How can I reset my IPhone without the Sleep/Wake Button working?
Thanks for the help.

When pressing the sheep/wake button, the iPhone's screen is not turned off if on and does not turn on if off, and pressing and holding the sleep/wake or on/off button does not bring up slide to power off?
And you can't do a reset by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?
If so and there is no change after restoring the iPhone with iTunes, make an appointment at an Apple store if there is one nearby since more than likely there is a hardware problem.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

HT1212 what if your home button does not work to try to fix the connect to itunes problem?

How do you diable your locked i pod touch using itunes if your home button does not work?

Use one of these programs to place the iPod in recovery node:
RecBoot: Easy Way to Put iPhone into Recovery Mode
The Firmware Umbrella - TinyUmbrella

Continue button does not work in content player for user on XP system

"Continue" or "Here" buttons does not work in "My Learning" content player for users on XP unlike for users on windows 2007 works fine. Pls let me know if XP needs to be on certain java version to work. we are on LSOFE 604.Java 1.6_21, IE8.
Pls let me know why user on windows 7 don't have any issues completing the course in ESS thru content player and only XP users have issues.
Thanks in advance.

Nicklas,
Check the link below. Maybe it will help.
http://discussions.apple.com/thread.jspa?threadID=2672794&tstart=30

My power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like it usually does but it's not turning on

my power button is not working and my phone doesn't wanna turn on i've tried to charge it so it can turn on like i usually does but it's not turning on

Hold down on the home button simultaenously holding on the sleep wake button (power button) hold it for more than 15 seconds this will then shut down the device.
If the device is already shut off do this same sequence to see if you get an apple logo. If you get the logo allow the device to login. Write back if this does not resolve your issue.
Good luck Friend.

Ipad app icons shaking but won't delete, home button does not work, power off switch does not work

I just got a new ipad air and have started to add apps to it. I have added a couple of free apps which I have also deleted (moved to icloud). I have also a couple of apps (free & purchased) which I have on it now.
Now my problem:
I tried to remove another free app. I press and hold the icon. All app icons shake and display the 'x' for removing, but the 'x' for does not work on any of the icons. Also, after this, the home button does not work as the icons keep shaking even while I am pressing the button. And the power off switch on the side of the device does not work either. If I close the smart cover and reopen it shows the home display and all the icons still shaking (instead of showing the passcode sign-in display). Fortunately (well, fortune in the misfortune) if I press the home button and off switch a couple times each and close the smart cover and wait, the device awakes normally. Well, normally until I try to remove any app.
So what do I need to do to fix this?
Thanx
Brian

Glad it worked. Anytime your iPad acts up, the reboot/reset is a common first thing to try. And it clears up many issues and glitches.
enjoy your new toy

HT4113 my power button does not work to power down phone. there for leading to the unablility of reseeting phone

Similar Messages

Maybe you are looking for