HT4113 what do i do if ipod touch says ipod disabled connect to iTunes
what do i do if ipod touch says ipod disabled connect to itunes
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Similar Messages
-
my ipod touch says "activation required, Connect to itunes" i restored it with on my itunes and it seems to be working again, after i tried connecting to my wifi with no luck i reset it, and again it pops back "activation required, connect to itunes" i restored again, its a non ending cycle, and it makes no sense having my ipod and i cannot connect to the internet with it, can someone please help with this issue?
Maybe here:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next would be to make an appointment at the Genius Bar of an Apple store. -
Ipod touch says its dissabled connect ti itunes but wont open up
ipod touch says its dissabled connect to itunes but wont open up
Try to connect in recovery mode, described here: http://support.apple.com/kb/HT1808
-
my ipod touch is showing the "connect to itunes" screen.. and on connecting to itunes and clicking on "restore" it shows error 3014.. what do i do?
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
i have an 8gb ipod touch that says its disabled connect to itunes but it is locked..when u connect it to itunes it tells you the passscode is incorrect so what do i do , would like to get it working with out losing everything on it if i can but if not i can redo it
Do as the manual says to do and restore the ipod.
If you are unable:
iOS: Unable to update or restore -
My iPod touch told me to connect to iTunes because it was disabled, but when I plugged it in, it said that there was a passcode that was needed to be unlocked. But I cant unlock it because it is disabled. What do I do?
Place the iPod in Recovery mode and then connect to yuor computer and restore via iTunes.
-
My ipod touch says its disabled, and i tried restoring it but it doesnt work what can i do?
my ipod touch says its disabled, and i tried restoring it but it doesnt work what can i do?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
my ipod touch 2nd generation wont connect to itunes. my computer says it is connected, but has no drivers. what does this mean and how do i fix it?
Start here. See the driver topic first.
iOS: Device not recognized in iTunes for Windows -
first generation ipod touch says ipod is disabled and won't unlock or allow me to attempt to unlock. how do i fix it?
Try this.
http://support.apple.com/kb/HT1808
Apple tip page for putting iPod in recovery mode.
Worked on mine for the same problem. -
My ipod touch says ipod is disabled what do i do to undisable it?
My Ipod Touch says (ipod is Disabled) how do I undisable it? So I can use it.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Hi, I've reset my 2nd generation ipod touch. However,the connect to itunes graphic appears on the screen but when I attach to my powerbook it doesn't show up either in itunes or finder. I can't be the first to have experienced this problem. please could someone advise me.
What iOS do you have on the iPod?
Did it every connect to your computer with that iOS?
The latest iOD for the 2G is 4.2.1 and that required a Mac with 10.5.8 or later.
Have you tried:
- another USB port and cable
- iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
I updated my ipod but it failed....
Now my Ipod touch is showing a connect to itunes image. When I connected it to itunes it said that I need to "Restore it". But I have video on it that I really, really need. How do I do this without loosing all of my footage and photos?
Please help!?You do not. You have to restore the iPod. You can then restoe from backup and get to where you were when the the last backups was made.
-
I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.
oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-
-
my itunes says it can not sync my ipod touch key in password on the device but my ipod touch says ipod disabled connect to itunes and doesnt give a option for my password how do I unlock my ipod
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Can anyone help me? my ipod touch says it is connected to wifi, but it won't run anything that uses wifi like safari or itunes, and I don't know how to fix it
You didn't indicate if it ever worked. If it NEVER did, the problem could be caused by a firewall in the router. For reasons that I do not understand, that will affect IOS (iPod/iPad) communication but will not affect computers or other devices.
You will need administrative access to the router. If a firewall is present, turn it off and test the iPod again. If it works, turn the firewall back on but weaken it a notch and test the iPod again. Repeat as required.
Maybe you are looking for
-
An E4200 "MegaThread" - FAQ, Issues, How to, etc
Hi Cisco Community! I've taken it on myself to make a kind of "mega-thread" for the E4200, because I see that there are a bunch of questions scattered around the forum, and (perhaps it's just me personally) I'd love to see things grouped together as
-
Updating 2013 SP1 to CU8 Error - Set-SharedConfigDC Fails
I have two 2012 servers running Exchange 2013 SP1. They are both multi-role servers and are members of a DAG and are also load-balanced behind a Citrix Netscaler. I was ready to begin moving my mailboxes from 2010 to 2013 when I ran into a problem. I
-
Nee help in changing de radio button
the output wil have the radio button, but i d0n wan the radio button.. wat shld i change? change to List izit? when i change to List, there's sumtin wron with my fm3.append(imageItem); thx import java.io.*; import java.util.*; import javax.microediti
-
I am using the bundled IPFILTER software on Solaris 10 x86. I find quite a few random requests going out on the external interface with an internal IP address (those requests are not being NAT-ed). This does not happen with all requests though.. only
-
Open Adobe Reader and not Acrobat in browser
I just installed the now freelaý available Adobe Acrobat Pro 7 and in my browers PDF files are now opened in that one. But I intend to use it only for editing PDFs. Since it is not the newest version, I would for security reasons prefer to have Adobe