HT4115 How can I get my Final Cut Express 4 projects into Final Cut Pro X?

I'm going to be switching to OSX Lion, and will have to update Final Cut, since express won't run on Lion. Thus I have to get X. With the new 64-bit Pro X is there a way to open my past projects? I know that at one time you could open up older versions of FC in higher and newer versions. I've heard about Assisted Editing's 7toX for Final Cut Pro application that allows you to convert your old FCP 7 files to be used in FCP X. Does anyone know of the best way I can assure not loosing all my current work?

You can't import FCE projects into FCP X but you can import the media.
You may well find that FCE will work on Lion.
It seems OK on mine.
Why do you want to go to Lion? Snow Leopard is probably a better OS in many ways.

Similar Messages

  • HT5103 How can I open Final Cut Express project in Final Cut Pro X?

    How can I open Final Cut Express project in Final Cut Pro X?

    If you export the project from FCE you can import the QuickTime into FCP. You can do limited work to it like adding titles.

  • My old computer crashed how can i get my songs from my phone into my new library?

    my old computer crashed how can i get my songs from my phone into my new library?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Editting PDF documents that were created by a MAC doesn't work because of font incompatability.  How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

    Editting PDF documents that were created by a MAC doesn't work because of font incompatability.  How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

    If it's a Mac font and you're on Windows, you can't. If you are also on a Mac, you'll need to purchase the fonts (fonts are generally non-transferable, like software. One of the reasons pdf exists), install them and try your edits.
    But it's best to edit the original document and create a new pdf when finished.

  • How can i get in work my Hp scaner with my macbook pro?

    how can i get in use my Hp scaner with my macbook pro?

    You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
    In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
    The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
    You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
    Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

  • How can I get my iMac screen to divide into sections? I'm using OS X 9.2. Thanks.

    How can I get my iMac screen to divide into sections? I'm using Maverick OS X 9.2. Thanks.

    You cannot split a monitor up into sections in Mac OS X.
    You can have separate monitor spaces or desktops that you can access using the Spaces or Mission Control functionality in OS X Mavericks.
    You cannot split monitor views into seperate sections
    There is no such way to do this in Mac OS X.
    Do a search for an app called Cinch OR another app called A Better Snap Tool. Both of these apps are in the Mac App Store.
    These may work for you.
    http://www.irradiatedsoftware.com/cinch/

  • Can I open my final cut express projects in final cut pro X?

    I need to get footage out of some of my final cut express projects and put them in final cut pro X, which I am now using. How do I do that?

    You can export any movie from FCE to Quicktime, and use it in FCP X. If you export using ProRes 422 codec it will already optimized for FCP X.
    What you can't do is use the FCE projects themselves in FCP X.

  • How can I get all tracks from an album into the album in my library?

    When importing the albums from a folder, the tracks for some of the albums were split up.  How can I get them in one?

    Hello JudyD276
    The article below will give the steps to get the songs grouped together for you.
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How can I get the photos from my pc into the cloud?

    I thought I was to do this, so I put my photo stream is in my icloud photos which is in the icloud drive.  I cannot see them in the cloud online nor on my phone.  Only my phones pics are in the cloud.  How can i get all my photos in the cloud?

    Hi alaskansharon,
    I see that you wish to add some photos to your iCloud Photo Stream from your Windows computer. Here is an article for you that will explain this process:
    iCloud: Add photos to My Photo Stream
    http://support.apple.com/kb/ph2606
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • How can I get the "Full cycle SAP project experience"?

    Hi,experts
    I'm a beginner of PI and familar with java,now i have got good acquaintence of PI architecture and familiar with ESR and ID in PI,but now i'm confused with the development aspect of PI expert...one thing is that full cycle sap project experience is a must,but how can i get that while i just always repeating the boring creation of PI objects and do the mapping,routing tasks etc...

    Hi Rajesh,
    If you started working with new implementation project then you will get a chnace to involve in all phases like Blue printing,analysys,realization,development testing.
    Creation of obejcts in ESR or ID its not a big deal,but when you are working with complex landscape then you feel to elanr and many newthing in PI how to achieve the requirement using Writing some good UDF and using node function ...Adapter Modules or JAVA Mapping or XSLT Mappings..and many.
    When you get in to SAP PI project,when you started development first you will start analysing the functional document and then you will start preparing techincal specification,then mapping specification then development,testing..these all tasks happend in pahse by phase.after completion of development then you wl tesing the interfaces ,preparing test cases...
    we can say full lide cycle implemenattion prijects invloves above all tasks.
    Regards,
    Raj

  • How can I get music off the ipod and into my library?

    I can't get the music off my ipod into my library... arg why won't it let me?

    You can't sync or drag your non iTMS music back directly from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. As iTunes 7 is just out some of these may not work with it yet though I haven't experienced any problems with the Mac software I use.
    YamiPod Mac and Windows Versions
    iGadget Windows Only
    iPodCopy Mac and Windows Versions
    iPod Access Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    There is a new function in iTunes 7 under File, "Transfer Purchases from iPod" which transfers iTMS purchases. A paragraph on it has been added to this article: How to use your iPod to move your music to a new computer

  • How can I import my xdcam files (Sony PMW200) into final cut pro

    Hi.
    I just got a Sony PMW200 but cannot figure how to import files into Final Cut Pro 6. I copied the SXS cards to my hard drive and am trying to figure out how to import it into Final Cut.
    I would really appreciate a little help.
    Thank you very much in advance.
    Brian

    Hi:
    If you own the material rights, you can use MPEG Streamclip to reencode to an editable format like DV.
    Hope that helps !
      Alberto

  • How can I get conneced to DB2 Express with JDBC?

    Hi,
    I have DB2 Express 8.1 installed in my computer, can I get connected to it by using JDBC step by step?
    Or is there any tutorial to show how to do this?
    Thank you !

    There is lots of information on using DB2 UDB Express with Java, including JDBC at the IBM developerWorks site. A good first article is: www.ibm.com/developerworks/db2/zones/java/bigpicture.html
    It gives a good overview of Java support for DB2. DB2 Express supports everything the rest of the DB2 product does. You build for one edition and can support on all other editions and platforms. Express is just the least expensive option in the family.
    Another great resource is the DB2 Information Center. It includes all the information on DB2 including Java support and programming: publib.boulder.ibm.com/infocenter/db2help

  • How can I get the Elapsed Time express to output in milliseconds?

    I am trying to get the Elapsed Time express to output in milliseconds or in seconds to three decimal places. I am pretty new at this.
    Thanks in advance!

    I'm not sure I understand your question. The output of the Elapsed Time Express VI is a DBL. It's already a floating point number. The default format for a numeric indicator is 6 digits of precision. You can change this in the properties for the indicator.
    To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
    Attachments:
    Example_VI.png ‏4 KB

  • How can I get a frame accurate output to tape using Premiere Pro CS6 and a Blackmagic Decklink Extre

    i can set the frame offeset inside the Export to tape tool (which BTW is horrible, you can't scrub, you MUST use ":" or ";" in the timecode fiellds or the deck just goes to the beginning of the tape etc), but I'm still 12 frames off.  there is a frame offset in the Blackmagic device control settings, but that does nothing for the output to tape.
    I don't want to have to export a quicktime and then open it in Final Cut to output to tape, the whole object is to get away from FCP because it's a horrible ghorrible program.....TIA
    This particular system is an 8core Nehelem Mac Pro with 32GB of ram, OS 10.7.5. 

    I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

Maybe you are looking for