HT4117 creating bootable usb for mountain lion

How does one create a bootable usb for mountain lion?

This application is mentioned in the article Eustace posted. I have used it and it is a no-brainer. You will need to have an installer copy of Mountain Lion available.
Lion Disk Maker

Similar Messages

  • How can I make a bootable disk for Mountain Lion?

    How can I make a bootable disk for Mountain Lion?

    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.

  • Is it legal to create a bootable usb with mountain lion?

    If the answer is yes, could you tell me what tool to use or give me the site with the tutorial? Thanks in advance!

    Yes,
    Use this app and you will need a copy of Mountain Lion installed on your Mac (of course)

  • How can I get Mac Mini to accept bootable installers for Mountain Lion ? They work fine on MB-Pro

    I've had a Mac Mini (late 2012) for the past week and need to do a complete reinstall to get rid of very mucked up Server.app settings that I can't get rid of even though I uninstalled Server.app and what I thought were all of its Library files. I need to get the Mac Mini back to pristine, factory default to start over. Then I'll be able to put Server.app into a VM so I can trash it if need be without mucking up the rest of my system.
    I have both a bootable recovery partition on an external hard drive (My Book firewire) and a USB bootable installer with a fresh edition of Mountain Lion. I know the USB installer works just fine because I used it to do a clean install of my MacBook-Pro just last night. Went like a charm.
    When I start up the Mac Mini with the option key held down, everything seems fine -- I see both the USB drive and the My Book's 2 volumes (1 for data, 1 for the Recovery partition). But when I select either the USB drive or the My Book Recovery partition as the start-up drive, I get a screen with a circle with a line across (the no-entry traffic sign), with no way to go back or forward. So the computer has to be rebooted.
    Any suggestions as to how to get the Mac Mini to recognize bootable installers that MacBooks are able to see?

    Late 2012 Mac mini uses a special Mountain Lion version that it's only compatible with this Mac and you can only get on Internet Recovery because it's not available in the App Store. If you want to reinstall Mountain Lion, press Command, Option and R keys while your computer is starting

  • I've made my bootable disk for mountain lion but when I try to load it on my imac 2008 I get a message that I need 2g of memory. Am I trying to load it incorrectly?

    The screen is frozen and i don't know what to do.

    As shldr said, OS X Mountain Lion needs 2 GB of memory or more. If you see a message telling you that you need 2 GB or more of memory, that's because you have less memory than 2 GB on the computer.
    You have to buy more memory for your computer, and I recommend you to buy it in OWC or Crucial > http://eshop.macsales.com/shop/apple/memory/iMac

  • Can I create a bootable usb for Lion SERVER?

    I've installed Lion OS. Then downloaded Lion SERVER.
    Creating a bootable USB for the ordinary OS was simple enough (stop install, show contents,restore partition etc). However, with Lion Server, install package does not appear in applications and there does not seem to be any obvious was way to stop the installation before the install package self destructs. Download from app store shows in Launchpad. Icon then changes to 'installing'. Install process is very quick and it won't stop
    Has anyone else had this "problem"? Thanks!

    If you have a Mac mini Server with Lion server pre-installed you can do this fairly easily using the method outlined here http://www.hotblack.co.nz/article.lsd?i=lionserver
    But I have a stock iMac with Lion pre-installed and got the Lion Server on top. I too have been looking at this "problem". Even after you've installed Lion Server and try the method they suggest you do not get a Lion Server InstallESD.dmg file.
    My solution is this:
    Using your existing Lion Server, copy "Install Mac OS X Lion" to your applications folder. Then when you use the installer with a BLANK volume as your target you will see an Options button on the bottom left side of the Installer pane. Clicking this allows you to install Server components. Your target can be a 16GB USB stick. Interestingly when this stick reboots you actually get the Server Assistant up which can configure your server.
    So essentially you have a Lion Server USB stick - again don't forget to add "Install Mac OS X Lion" to the Applications folder.
    You can also snag the Server components for copying onto target volumes by shutting down before the install reboot.

  • USB/Flash support for Mountain Lion

    What App is availiable on app store as USB support for mountain lion? There was one 'USBmate'. Is it okay? If not please tell me how to get the USB support. I have downoaded installation of ML but have not installed it because backups have to be on external HDD. Please help me.

    I don't know to what you are referring. I think you mean a bootable USB flash drive for installing OS X. If so, then know there is no such thing for Mountain Lion. There was for Lion, but it is no longer available. Apple never included any installer disc for computers with Lion or Mountain Lion pre-installed.
    Reinstalling Lion or Mountain Lion is done through the Internet Recovery - OS X (Lion/Mountain Lion)- About OS X Recovery.
    If you download Lion or Mountain Lion from the App Store you can save the installer application and make a bootable installer from it:
    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.
    As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process.

  • Hi, how do I create a standalone installer for Mountain Lion, ie, download once and then no more broadband required, thanks?

    Hi, how do I create a standalone installer for Mountain Lion, ie, download once and then no more broadband required, thanks?
    Context is that my other computers are not mobile and I do not have broadband worth troubling for a 4GB download - so will go to Apple Store with MacBook Pro for first download.

    The easiest way is to download the installer but do not open it.
    Next, make a copy of it and store it where it won't get lost.
    Then take one of the copies and place into the applications directory and open it to begin the installer.
    This has saved me the trouble of ever having to download the installer twice, plus you can mess around with the installer and try different options without having to worry about not having a clean install file if needed.
    Best wishes

  • Snes emulator for mountain lion with support for usb controller dongle

    Hi,
    I recently downloaded an snes emulator online and found that it does run the super nintendo game fine though it doesn't have support for the usb dongle for the controller. By any chance does anyone know a emular plug in or emulator for mountain lion that has this support for a usb joystick.

    Thanks for the reply. Still curious if Apple did right by their customers as the support rep implied that they would. I can't confirm either because I discovered tonight that I can't upgrade to Mountain Lion yet until Mariner Software decides to make one of their products compatible with 10.8.  Starting to think I need to find an alternative to their product.

  • How do I create 2 Recovery partitions: one for Lion and one for Mountain Lion?

    Well that is basically the question:
    How do I create 2 recovery partitions: one for Lion and one for Mountain Lion?
    Reason is that I would like to keep the option to return to Lion, or even better, have a seperate partition for eacht?

    can I access my programs from the other partition, so I can save space ...
    No, as far as I know, each one is completely separate - especially if you're dealing with two different versions of OS's.
    is it possible to safely make an extra partion on a running drive (it is my main computer ...) The disk is large enough ...
    how large would this have to be
    I've personally never done it on a running drive - have read it's possible, but don't want to suggest it since I've never done it and wouldn't be sure about the steps. This is how I got to two partitions on my iMac:
    Originally, I had just one partition with Snow Leopard. I used CCC to clone that to an external drive. Booted into that drive and used DU to partition and erase the internal. I then cloned the new clone back. Also cloned the same thing to the other partition which I then upgraded to Lion. So I had two OS's - SL and Lion. I've now decided to clone my SL to an external drive for occasional use and installed ML on that partition - so now I have Lion and ML.
    There are two ways to get a "fresh" install: either download the OS again and install it on a partition of your choice or, as I've done as well, copy the installer to a safe place so you don't need to download it again. It does include whatever apps/software is included in the OS.  I've designated two smaller partitions on externals as my "fresh" installs of both Lion and ML for emergency or reinstall purposes (this is my way of dealing with not having install DVDs) - I took the time to install it there and then slowly add fresh installs of my important apps (either via download or install CD) - don't bother with the little/less used stuff, a current copy of that can be downloaded if and when I need it. I don't really update those two - that can also be done if/when I need it since that'll always change.
    So, yesterday, I decided I wanted to start fresh with ML - booted into my fresh install of Lion (on external), wiped the SL partition on my internal and installed Lion. Decided to download a fresh copy of the ML installer and installed that. Then ran Software Update. After that, repaired permissions. Then I methodically opened every third party app and checked for updates - installed those where necessary. After all that, I simply copied (drag 'n drop) my entire Documents folder (which contains all my important data,, photos, etc) over from another backup.
    This took a while, but mostly because of the long download times; the installs weren't all that bad. I should be running a really clean system now, especially since nothing was ported over except my Documents folder.

  • I want to move a bootable copy of Mountain Lion to an external HD before I upgrade to Maverics. How do I do this?

    I am preparing to upgrade to Mavericks.  I want to put a bootable copy of Mountain Lion on an external hard drive so that I may run apps that aren't yet compatible with Mavericks.  How do I do this?

    You will need an external HD and either SuperDuper or Carbon Copy Cloner. Both will create bootable clones of your of your system. One is not "better" than the other, to be honest it's simple user preference in the UI.  Once you have created your clone boot from it to test and once you have validated it works then you can download Mavericks and begin using it. You can Google for each app and download them, each cost approximately $40-$60.
    In the event you want to go back to ML the clone will provide that freedom. Or if you simply need to use ML to get to Apps that only run on that version of OS X then you can. I would recommend getting an EHD that has the fastest connection your computer has output for. For example if your machine has a  Thunderbolt connection, get a EHD that supports Thunderbolt.

  • Is there web publishing software for Mountain Lion?

    I have searched the Apple Website and am finding iWeb to be unavailable. Is that true? How do you create a website with Mountain Lion?

    I did make a list of alternatives a while back. Download from this page...
    http://www.iwebformusicians.com/iWeb/Why-iWeb.html
    I didn't include this one which may be of interest to those who want an app that will run on Windows and Linux too for passing site maintainance over to others who don't have a Mac and for collaboration...
    http://www.quickandeasywebbuilder.com

  • HT5275 where i can i download safari browser for mountain lion...safari not working anymore :)-

    Process:         Safari [864]
    Path:            /Users/USER/Desktop/Safari.app/Contents/MacOS/Safari
    Identifier:      com.apple.Safari
    Version:         5.0.5 (6533.21.1)
    Build Info:      WebBrowser-75332101~7
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [194]
    User ID:         501
    Date/Time:       2012-07-27 08:15:08.202 -0700
    OS Version:      Mac OS X 10.8 (12A269)
    Report Version:  10
    Interval Since Last Report:          1612 sec
    Crashes Since Last Report:           24
    Per-App Crashes Since Last Report:   5
    Anonymous UUID:                      CD2550E7-CA89-438D-A184-2D3C68F75800
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
      Referenced from: /Users/USER/Desktop/Safari.app/Contents/MacOS/Safari
      Reason: image not found
    Binary Images:
           0x100000000 -        0x1006afff7  com.apple.Safari (5.0.5 - 6533.21.1) <54A708F9-B30A-0C6C-95A5-E185874E1B0D> /Users/USER/Desktop/Safari.app/Contents/MacOS/Safari
        0x7fff6a2a6000 -     0x7fff6a2da93f  dyld (210.2.3) <A40597AA-5529-3337-8C09-D8A014EB1578> /usr/lib/dyld
        0x7fff85dac000 -     0x7fff86067fff  com.apple.AddressBook.framework (7.0 - 1143) <EC55CF4B-4194-3163-B6E1-8C8D2712FBCF> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
        0x7fff8606f000 -     0x7fff860a3fff  com.apple.securityinterface (6.0 - 55024.3) <1AF13976-72BB-351F-A263-09284BA25C88> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
        0x7fff861e6000 -     0x7fff861f2ff7  com.apple.CrashReporterSupport (10.8 - 411) <FA7EA7CD-103D-30B1-BF2F-862E68A6B5B7> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
        0x7fff862aa000 -     0x7fff862aafff  com.apple.Carbon (154 - 155) <372716D2-6FA1-3611-8501-3DD1D4A6E8C8> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
        0x7fff8690b000 -     0x7fff869fcff7  com.apple.PubSub (1.0.5 - 65.32) <A53D3D5D-85DF-3CFC-94DF-FB05D6FEC34A> /System/Library/Frameworks/PubSub.framework/Versions/A/PubSub
        0x7fff86ba2000 -     0x7fff86bb1ff7  com.apple.opengl (1.8.5 - 1.8.5) <C554C4DA-517D-3F77-BC7E-DDFD9E01A891> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
        0x7fff86c46000 -     0x7fff86c71fff  com.apple.framework.Apple80211 (8.0 - 800.15) <378C6564-96EC-3BFF-9AC0-8A6F87030254> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
        0x7fff8902c000 -     0x7fff892c5ff7  com.apple.JavaScriptCore (8536 - 8536.24) <3A80677B-3381-3281-8033-0F96F7D8D01A> /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
        0x7fff893eb000 -     0x7fff893ebfff  com.apple.Cocoa (6.7 - 19) <1F77945C-F37A-3171-B22E-F7AB0FCBB4D4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
        0x7fff89929000 -     0x7fff89938ff7  libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
        0x7fff89ad7000 -     0x7fff89ad7fff  com.apple.quartzframework (1.5 - 1.5) <6403C982-0D45-37EE-A0F0-0EF8BCFEF440> /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
        0x7fff8b8dd000 -     0x7fff8b95bff7  com.apple.securityfoundation (6.0 - 55115.4) <C5461971-E455-31A6-99B8-AF80C4BC26DD> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
        0x7fff8ca34000 -     0x7fff8ca90fff  com.apple.corelocation (1.0 - 1239.35) <0E3482AE-CF12-3CE2-A15E-0BF3D5F956CB> /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation
        0x7fff8ca91000 -     0x7fff8cb8efff  libsqlite3.dylib (138) <8D6A6805-1494-30D1-9F2A-F58FA3C0D7EE> /usr/lib/libsqlite3.dylib
        0x7fff8f40b000 -     0x7fff8f6d8ff7  com.apple.security (7.0 - 55163.44) <E62305A2-958D-3EBC-B7E5-9A151D3E1777> /System/Library/Frameworks/Security.framework/Versions/A/Security
        0x7fff8f746000 -     0x7fff8f946fff  libicucore.A.dylib (491.11.1) <17E8B610-6B16-3F91-B49C-7CAE0D08E9CF> /usr/lib/libicucore.A.dylib
        0x7fff90a92000 -     0x7fff90affff7  com.apple.framework.IOKit (2.0 - 755.9.7) <9B7C5E7A-3F7A-3E70-8179-4384992B84E0> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f98
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.20)
    Bluetooth: Version 4.0.9f8 10405, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

    Mountain Lion came with Safari 6, so you appear to have an older version of Safari still installed. At some time you appear to have moved or renamed an older version of Safari to your desktop. Make sure you launch the Safari 6 that came with Mountain Lion which is in the Applications folder, and trash that older version.
    If you somehow deleted Safari 6 or overwrote it with an older copy, you'll either need to reinstall Mountain Lion, copy Safari 6 from another system running Mountain Lion, or extract Safari 6 from the Mountain Lion installer using Pacifist from Charlessoft. Safari 6 for Mountain Lion is not available as a separate download from Apple, to the best of my knowledge.
    Regards.
    Message was edited by: varjak paw

  • Canon CAPT 355 doesn't work for Mountain Lion

    SInce I installed Mountain Lion onto my MacBookPro I can't print to my Canon LBP5050N. I've install CAPT 355 that Canon claims will work for Mountain Lion but it doesn't work. I've tried uninstalling all my older driver and installing CAPT 355 but that doesn't work either.

    The ccpd.conf file is still
    # Canon Printer Daemon for CUPS Configuration Data
    <Path>
    # CUPS configuration files Path
    #  Default  /
    CUPS_ConfigPath   /
    # LOG Directory Path
    #LogDirectoryPath /var/log/CCPD/
    </Path>
    # Printer entries
    #  Mapping each "Printer-Name" to "Printer Device Port".
    # The "Printer-Name" has to be identical to the CUPS printer queue name.
    #  For example, if you prepare a printer named "LBP3200" as a CUPS printer
    #  queue name, and the printer is connected to the USB port "/dev/usb/lp0",
    #  you can use the following three lines example just by removing the
    #  comment symbol "#" of each line.
    #<Printer  LBP3200>
    #DevicePath  /dev/usb/lp0
    #</Printer>
    <Ports>
    # Status Monitor API socket port
    #  Default PORT  59787
    UI_Port  59787
    </Ports>
    # Backend Data API  socket port
    #  Default PORT  59687
    PDATA_Port  59687
    </Ports>
    I've tried putting in
    <Printer Canon_LBP5050N>
    DevicePath lpd://192.168.1.152
    </Printer>
    manually but no success in getting the results. I've even tried changing the preference file org.cups.printers to include
    <string>cnbma://localhost:59687/</string>
    Regards,
    Edwin

  • Tried to install maverick but app store had 1 update for mountain lion so I installed it.it didn't restarted so I did n then it started installing mountain lion..

    Tried to install maverick but app store had 1 update for mountain lion so I installed it.it didn't restarted so I did n then it started installing mountain lion.
    I had 1 update for mountain lion so I did it said restart required but I got stuck in the middle of the process n  yhen it said install mountain lion again.
    Now what to do help me please

    iCloud isn't syncing them on your phone.  You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone.  You can do this with Gmail, Yahoo and other IMAP account.  iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
    iCloud didnt' set up a non-iCloud account on your Mac.  When you check Mail in System Preferences>iCloud, it only creates an iCloud email account.  You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar.  If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

Maybe you are looking for

  • SCORE: Polyphonic Score Style & Rests

    Hello Score Gurus, This horn part is written within a single MIDI region using a polyphonic score style with four parts (on 4 MIDI channels) to allocate the notes to the proper voice between the two staves. In this example, only horns 1 and 3 are pla

  • XML Data w/ plsql

    Greetings, Case: Trying to create a report on eBS and XDO combines to plsql as xml data source. Problem: When I execute the procedure, Only one single record is generated, whereas the underlying sql statement retreives more rows. Question: Could you

  • Copy(string1, string2)

    Hi, In Forms pl/sql you can use this command to copy between two strings, where you can dybnamically build the string names. It doesn't seem to be in database pl/sql, anyone know how to do this in database pl/sql please ?????? TIA Tony

  • Shortcuts on The Dock??

    How do i make a shortcut appear on my Dock for a page like eBay or Facebook on my MacAir? Thanks

  • Why does the character size keep changing to extreme small on the home page?

    With the new Firefox downloaded the character type changes to extremely small print every time I go away from the home page. I then have to reset it to larger print. With old Firefox the print size remained as I set it all the time.