HT4145 I'm trying to hook up a desk top and it's asking me for network security code i have a apple router
I called the help desk from the phone company they sent me to my router owner which is an apple its asking me for network security code where do ii find this
If you still have the box and instruction manual for your Apple router then pull it out. Find the part of the manual that tells you how to do a factory reset of the router and follow the instructions to do so. Once it restarts, then start at the beginning of the manual and follow the instructions carefully. They will tell you how to install AirPort utility on your computer, and then how to connect to and configure the settings on the router.
When setting up your router's wireless settings, make sure to choose a network name with no spaces (e.g. "MyRouter"), choose "WPA2 Personal" security, and then type in a strong passphrase (twice). Make your passphrase at least 10 characters and reasonably complex (e.g. "MyR0uter!sVery5ecure").
Once you have made the settings, and saved them (per the manual), then you should see your new network name show up as an available network from your computer. Select the network, type in the wireless passphrase, and it should connect.
Similar Messages
-
Help me I have been trying to restore my iphone back to original settings an very time I try it asked me for a restriction code I have never set a restriction code and was just wondering if they were all the same for every iPhone please could someone help me
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod.
- If you are up to it see:
How to reset forgotten Restrictions...: Apple Support Communities
Some other uses have experienced a Restructuions passcode just appearing out of thin air. Try passwords you use on the iPhone. -
I'm trying to make a payment on my iPhone to AppStore but it keeps asking me for my security code from my card and now it just tells me to come here for support
The "backup password" refers to a password you created when you elected to encrypt your iPhone's backup. If you cannot remember the encryption password, you will not be able to access the backup.
-
guys, i keep trying to purchase some songs on itunes, and it keeps asking me to answer security questions, which i have forgotten, so it says it has sent an email to me, so i go to my email and its not there! anyone have any ideas? this is really ANNOYING
You can try here with manage your account
http://www.apple.com/support/appleid/
I had mine mess up a few months ago and tried to get the e-mail three different times and it never came. I ended up scheduling for a tech to call me to figure it out. -
I'm trying to set up my purchase account, but it keeps asking me about an iTunes code I have to feel in but I don't know what is that code and where do I get it?
THe iTunes gift code is an optional field, you don't have to fill it in - gift cards are an alternative method of paying for iTunes content, but as they are not available inall countries (and they are country-specific, they can only be used in the country in which they were issued), you may not be able to fill it in anyway. If they are available in your country then you might be able to buy cards from Apple, supermarkets, electrical stores etc
If you have a credit card then you can use that as your payment method instead. Otherwise there are instrutions on this page for how to create a new account without giving a credit card number (it won't with existing, or partially created, accounts) : http://support.apple.com/kb/HT2534 -
I am trying to download audible books to my itunes, it keeps asking me for a password which I have changed and confirmed ??
is there a seperate password for downloading audible books to itunes, so I can download onto my ipod??I assume you mean the phone is asking for the 4 digit password you set at the time of the backup of the phone...
-
I am trying to install iOS 7.1.1 but it keep asking me for a passcode what is that? It is not accepting my Apple ID
Hey, try your lockscreen passcode , that's what it should be asking for.
-
I have tried to install home sharing between my desk top and lap top. I can only see the music I have bought from iTunes on my lap top. Is this normal? I thought I would be able to see my entire library.
Yes I tried that. I finally turned off all home sharing settings, shut down my desktop and found them in my account settings in the store on the cloud. So at that point I just had it download everything. But I suspect that with the ipad somehow being on, the store was saying I had already received them? Regardless, my trip today whilst running errands, I was rocking out to vintage Police music! Thank you so much for responding.
-
I Am trying to update my IPad to ISO 8.1.2 and it is asking for a pass code. Where do I get this pass code? My apple password does not work.
It's the passcode you use to unlock your iPad.
-
Trying to download itunes on new computer and it says thank you for downloading but nothing happened
trying to download itunes on new computer and it says thank you for downloading but nothing happened
Clear your broswer's cache and then try again.
-
I tried to buy an app and itunes keeps asking for a security code. What is a security code? I only have a password! And ID
Are you using a credit card?
http://store.apple.com/au/help/payments#creditus
Security codes
The credit card security code is a unique three or four digit number printed on the front (American Express) or back (Visa/MasterCard) of your card. -
I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?
You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years. -
i am trying to set up icloud on my iphone when i go to settings icloud it says verifying and a box pops up for me to sign in with my apple id but that has my old apple id on it. help??
Have you already verified your "new" email address? If not then please check your inbox for a confirmation email (also the junk folder). If you do not have a confirmation email then please sign in at https://appleid.apple.com and press "verify" for confirming your email address.
-
Hi I am trying to restore my iphone from the itunes back and it is asking me for a password, I don't ever remember putting a password in. how do i get the password reset?
Marrtin S wrote:
Hi I am trying to restore my iphone from the itunes back and it is asking me for a password, I don't ever remember putting a password in. how do i get the password reset?
You can't get it reset; if you could there would be no point in having it. If you have an encrypted backup there are two ways this could have happened:
You checked "Encrypt Backup" in iTunes at some time in the past, either intentionally or by accident
You have a corporate MS Exchange account and your Exchange administrator installed a security profile on your phone that requires the phone'a contents to be encrypted. This, in turn, requires the backup to be encrypted for obvious reasons.
In either case you were prompted for a password the first time you backed up after whichever of these happened. So think about what you might have entered for a password at that time. Fortunately you get an unlimited number of tries. Other threads on this subject have shown that it is always a password known to the user, so it wasn't something made up by iTunes. Also, everyone who has figured it out has found it to be a different password type, so try your Apple ID password, your computer's login password, your WiFi password, your corporate domain password, etc. And try passwords that may have been changed since your first backup. As a last resort there is a professional password cracker available, but it isn't cheap - it's targeted at the law enforcement market - from Elcomsoft. There are also some scam password crackers available that don't actually work and possibly steal your information. It's likely that a developer of one or more of these will post a response with a link (possibly hidden) to their "product". So before clicking any links you might want to install the Web of Trust plugin that keeps track of scam sites and warns you. http://www.mywot.com. -
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
Synch BPEL Process calling PeopleSoft CI Web Service
Hello....I am trying to create a simple BPEL Process which invokes a PeopleSoft Component Interface Web Service that I created in PeopleSoft 8.9 and when I execute the BPEL Process, the following binding fault is thrown: xmlns:SOAP-ENV="http://schema
-
Hi, Im having some trouble and was wondering if anyone could figure this out. I need to read in integers to build a linked list, but stuck on what to do after I read in a integer. Any help would be much appreciated! class lp public int first;
-
Tip: How to emulate Photoshop-style curves in Lightroom
We all remember the days of Lightroom 1 and the term "Adobe red", when lots of people shouted about how their in-camera color is superior to Adobe's rendering. These days are long forgotten, now that we have the DNG color profiles, introduced with Li
-
Open old library in aperture 3.5 fails
I upgraded to 3.5 on my mac mini, but now I can't open my existing libraries (from 3.2) : it says the lib has to be converted, that I have to reload aperture for that to happen, that it will reload and convert my lib... but then I just reloads my cur
-
Unable to SSH into both remote & VM machine server
Unable to SSH into both remote & VM machine server Getting the message "fork failed: Resource temporarily unavailable" "ssh_exchange_identification: Connection closed by remote host" "ssh_exchange_identification: Connection closed by remote host" "ss