HT4150 Is there a scannersoftware version fot Mac OSX Lion (7)

I had Silverfast 6 for my Linotype scanner but even the upgrades don't work witn Mac OS 10.7 (Lion)
Silverfast only reports that there is no upgrade available fot this system. I still want to use my scanner. Does anybody know a solution?

You might see if VueScan will work with your scanner.

Similar Messages

There are no versions of Mac OS X available on your old Mac

Task: Migrate from iMac G5, OS X 10.4.11 to Intel iMac, OS X 10.5 using Setup Assistant.
I bought the Intel Mac from my son in perfect working order in a very vanilla kind of configuration. Rather than using the Migration Assistant and re-installing my old PPC applications, particularly, Microsoft Office 2004, I decided to reinstall the OS from scratch, so I could migrate everything using Setup Assistant.
When prompted by the Setup Assistant, I connected the two systems with a Firewire 400 cable, rebooted the G5 in Target Disk Mode and waited for the magic to begin. Instead, I got the error message:
"There are no versions of Mac OS X available on your old Mac"
My old iMac was not physically connected to any other Firewire device and only to the keyboard via USB.
I used “Continue” several times at this point to try again; the result was nil response after up to 15 minutes. I used “Go Back” several times here also to, reseat the firewire cable connectors, substitute a new firewire 400 cable, try an Ethernet cable, and reboot my old iMac in target mode both by a cold start with the “T” key depressed and by restarting by using “System Preferences/Startup Disk/Restart/Target Disk Mode.” After trying to read the disk on my old IMac G5, my Intel iMac gave me this same error message every time.
When I reboot my old iMac, the OS is obviously there, so I cannot think of what is preventing the connection. I’ve been out on the web and found nothing that comes up in response to the error message, except one post at http://forums.macrumors.com/showthread.php?t=691645 for a user trying to use the Migration Assistant. His solution of mounting the old iMac as an external drive isn’t available in Setup Assistant, whose troubleshooting options at this point of the install are zip. I found nothing helpful chasing some hints at "possible firmware issues."
Man! What an unexpected, unpleasant surprise. Suggestions are welcome.
Roy

Of significance did your G5's drive mount on your new computer's Desktop when you connected them and booted the G5 into TDM? If it does then skip using Setup Assistant. I would first give Migration Assistant (on the new computer) a try. Or you can use common backup software to "backup" what you want from the old computer to the new one over the Firewire link.
If you don't have other backup software to use then you can use Carbon Copy Cloner - CNet Downloads or MacUpdate - which is freely available. SuperDuper! is also a good choice if you already have a purchased copy. See the following for other options:
Backup Software Recommendations
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

I have Mac OSX Lion 10.7.4, Quickbooks Pro 2010, Parallels Desktop 7 for Mac, Operating in Windows 7. Are there any recommendations for running Quickbooks Pro 2010?

I have Mac OSX Lion 10.7.4, Quickbooks Pro 2010, Parallels Desktop 7 for Mac, Operating in Windows 7. Quicbooks Pro 2010 is not responding or opening currently. Quickbooks does not support Parallels anymore. I hear Apple Bootcamp is an opton. Are there any recommendations for running Quickbooks Pro 2010 on Mac?

QuickBooks Pro 2010 for Mac is not supported in Lion. QB Pro 2011 will work, but I just got an email today that 2011 will not be updated to work in Mountain Lion. QB Pro 2012 will be updated for ML.
Be aware that the Mac version of QuickBooks is shamefully lacking in features compared to the Windows version. I do use the Mac version, but it has more features than I need for a small business, so it doesn't affect me. No one knows why Intuit seems to hate Mac users, but they show it every day.
If QB Pro 2012 for Mac can be downloaded as a demo, I would strongly suggest testing with it before making a final decision. You will be able to import the Windows data, but possibly not all of it, depending on the Windows version features you use.
Boot Camp allows you to install Windows on its own, bootable partition. When you boot to it, you are of course running Windows in every sense of the word. Just on Mac hardware rather than typical PC gear. Your Windows version of QB will work there without issue. The problem is having to boot back and forth between Windows and OS X, depending on what software it is you need to use at the time.

Cannot use this version of the application with this version of MAC OSX

When I try to download the new beta, I get a message that says: cannot use this version of the application with this version of MAC OSX
I'm new to Macs, but I installed all the software updates and that still didn't help. I dont have to buy a new operating system do I?

Muse requires Mac OS X 10.6 or later.
http://muse.adobe.com/tech-specs.html

How to install oldest version of mac osx

guys i need to install oldest version of mac osx
im using 10.6.3 but i need to install back to 10.5.8
please help me out

How to instal oldest mac osx wrote:
15 inc
2.8 ghz
4 g ram i've got and also originally i've got mac osx 10.6 dvd.
but i need to install 10.5.8
coz my connectiv box driver approve only 10.5.8
According to Mactracker, given the size of the screen and the CPU speed your MBP could be one of these models:
- MacBookPro5,1, which originally shipped with OS X 10.5.5
- MacBookPro5,3, which originally shipped with OS X 10.5.7
Since they originally shipped with OS X 10.5, the system disc that came with your MBP may have 10.5 on it. If so, you should be able to do a reinstall from the original disc. If you do a full backup to another volume before you do that, you can recover your data from the backup to your MBP. However, some migrating some of the data (such as Mail messages) may be tricky due to format changes.

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 which works on OS X 10.4 from http://www.mozilla.com/en-US/firefox/all-older.html

Disk utility "You can't use this version of the application Disk Utility with this version of Mac OSX. You have Disk Utility 12.1"

I use mountain lion 10.8.1
I try start disk utility it only says: "You can't use this version of the application Disk Utility with this version of Mac OSX. You have Disk Utility 12.1"

To do a Reinstall of the OS boot to the Recovery HD, Command+r key at startup, then select Reinstall Mac OS X. the files will be downloaded from the internet and then the instal will begin.
With Mt Lion it is also available from the Mac App store in your Purchases area. You may be able to download it and then nmanually starting the install while booted to Mt Lion.
But I'd normally use the Recovery HD as that takes the installed OS out of the picture.

Quicktime Plugin Issue in Safari on Mac OSX Lion.

(Strange) Safari - Quicktime - issue on Mac OSX Lion (All Updates done - 20/11/2011)
Strange issue with Safari - Quicktime video playing - on Mac OSX Lion (All updates done till 20th Nov 2011 night)
Problem discovery: Tried to view the Apple iPhone 4S Keynote on Apple Website. Strange that Safari does not display any videos from Apple Website.
Following works OK:- You Tube worked fine.
- Google Chrome worked fine. (It shows the quick time player loading and then displays the video absolutely fine.)
Conclusion: There is some problem with Safari Quicktime Plug-in.
Strange Discovery:
- There are two users on the MAC. Logged in with a general user (Non Admin)
- When tried to view Apple Videos on Safary ... THEY WORKED FINE !!!
- The user where they donot work is an ADMIN User ... Strange !!!
System:
- Mac-Mini 2010 - 8 GB RAM - with OSX Lion fully software updated until 20th Nov 2011 night.
- DIVX is installed and is also a paid version - registered with DIVX website.
- VLC is installed.
- Perian was installed - after problem discovery - uninstalled it - no use.
Please help with a solution if anyone has faced and solved this problem. Sub question is : If DIVX / anyother plug-in causes problems with QuickTime plugin on Safari, why does it affect only one user on the system and not other users on that system ?
Notes:
1) There is a similar looking thread on MacRumors here but concluded that required to start a seperate one with clear problem statement.
2) Apple Forums
(a) One thread on topic that hints that some 3IVX plug-in can cause issues with Safari Quicktime Plugin: here
(b) Another thread from Apple Forum, that hints that DIVX causes problems to Safari Quicktime Plug in, Link is Here

Refer to a thread on Apple Discussions Forum itself, Link is HERE; refer to the posting by "Charles Cole",
Charles Cole
Re: Does anyone recommend OS X Lion?
Aug 2, 2011 8:09 PM (in response to Landrix)
Charles writes about DIVX and QuickTime Plugin conflict in Safari:
One thing I've discovered that might help anyone having a Quicktime Plug-in issue. If you have DivX as a codec on your system (usually installed to play .avi files) you'll want to uninstall it so that Sarfari 5.1 will default to the Quicktime Plug-In and not the DivX plug-in. Otherwise, you can't see Quicktime movies in Safari.
Note: this post is about and at the time of OSX Lions launch, i.e. 10.7.0.
Now we have 10.7.2, still cannot believe Apple has not fixed this bug !!!

E2000 Parental control tab missing - Mac OSX Lion

I am trying to use the Parental Control feature. I can't use Cisco Connect as there currently isn't an update for this router for Mac OSX Lion
The firmware version in the support site hasn't been updated for ages, and I am running the latest (v 1.0.04)
The Parental control tab, that is supposed to appear in the web browser interface isn't there. It's supposed to be, but doesn't show up.
Any ideas why or what the work around might be?
Thanks

If you want to use the Parental Control Feature then it will be in the name of Access Restriction instead of Parental Control…
Cisco Connect 1.4 comes with the latest Linksys routers. It is compatible with Mac OS X Lion. This has resolved compatibility issues encountered in the past.
Here is the link for the Cisco Connect Software Installation:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=21463&userrole=Links...

Trying to update cc desktop on mac osx lion and keep getting file download error 204

Hi ,
I have Mac OSX Lion 10.7.5 and keep getting this error when trying to update my cc desktop app that is reporting an update. There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.(Error code: 204)Contact Customer Support
please resolve.

I have the same problem and was on lots off sides of adobe, no answer then i searched in the log data and found this.
06/21/14 19:04:06:710 | [INFO] | | ACC | LBS | ApplicationFacade | | | 43925 | ****************Starting LBS workflow*******************
06/21/14 19:04:06:715 | [INFO] | | Download | LBS | ProductInfo | | | 43925 | Product locale not specified in the product information file
06/21/14 19:04:06:715 | [INFO] | | Download | LBS | ProductInfo | | | 43925 | Product name not specified in the product information file
06/21/14 19:04:06:715 | [INFO] | | Download | LBS | LBSUtils | | | 43925 | Launching LBS in elevated mode
06/21/14 19:04:12:270 | [INFO] | | ACC | LBS | ApplicationFacade | | | 43999 | ****************Starting LBS workflow*******************
06/21/14 19:04:12:276 | [INFO] | | ACC | LBS | WorkflowManager | | | 43999 | LBS launched in LEGACY mode
06/21/14 19:04:12:399 | [INFO] | | Download | LBS | SystemCheck | | | 44009 | System OS Version - major = 10, minor = 7, bugFix = 5
06/21/14 19:04:12:399 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | ACCC System requirements check passed
06/21/14 19:04:12:433 | [INFO] | | Download | LBS | ProductInfo | | | 44009 | Product locale not specified in the product information file
06/21/14 19:04:12:433 | [INFO] | | Download | LBS | ProductInfo | | | 44009 | Product name not specified in the product information file
06/21/14 19:04:12:433 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | Bootstrap LBS is successful
06/21/14 19:04:12:451 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | Bootstrapper Lock acquired
06/21/14 19:04:12:469 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | LBS Lock acquired
06/21/14 19:04:12:501 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | Deployment lock check passed
06/21/14 19:04:12:519 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | The resolved URL for package service is https://prod-rel-ffc.oobesaas.adobe.com/adobe-ffc-external/core/v1/applications?name=Creat iveCloud&name=CCLBS&osVersion=10.7.5&platform=osx10
06/21/14 19:04:14:236 | [INFO] | | ACC | LBS | WorkflowManager | | | 44009 | Successfully downloaded application xml at path /tmp/912ACE51-6B35-48F6-9D63-D863680F0EE3/applications.xml
06/21/14 19:04:14:314 | [INFO] | | ACC | LBS | WorkflowManager | | FileUtils | 44009 |
06/21/14 19:04:14:314 | [ERROR] | | ACC | LBS | PDM | PackageDownloadManager | | 44009 | Failed to create folder at temp location for download operations
06/21/14 19:04:15:143 | [ERROR] | | ACC | LBS | PDM | PackageDownloadManager | | 44033 | Could not init xml parser with download manifest file at
06/21/14 19:04:15:222 | [ERROR] | | ACC | LBS | WorkflowManager | | | 44009 | PDM stopped with fatal error in downloading PIM with error -3
06/21/14 19:04:15:344 | [ERROR] | | ACC | LBS | WorkflowManager | | | 44009 | Failed in DOWNLOAD PIM
06/21/14 19:07:19:779 | [INFO] | | Download | LBS | ETS | | | 43999 | Waiting for the async thread to get the task completed
06/21/14 19:07:19:788 | [INFO] | | Download | LBS | ETS | | | 44013 | Async thread is completed. Now exiting from function.
06/21/14 19:07:19:790 | [INFO] | | ACC | LBS | ApplicationFacade | | | 43999 | ACC installation end with exit code: 214
06/21/14 19:07:19:790 | [INFO] | | ACC | LBS | ApplicationFacade | | | 43999 | ****************Closing LBS workflow*******************
Adobe please help, it´s not the first problem installing updates in CC, i we pay for it !!!

SQL developer wont start on Mac OSX Lion

Hi there,
hoping someone can help me with this one, I've been running SQL Developer 3 on the macbook no problems for about a year, I recently upgraded to Mac OSX Lion and now when I try to start SQL Developer it will not run.
I have downloaded and installed the latest version of java as directed on the SQL Developer download page.
When I start SQL developer and view the Activity Monitor the "bash" process starts to use 100% CPU very quickly and SQL developer does not even get to the splash screen.
Can anyone point me in the right direction in terms of diagnosing this issue? Is there a log file I can review or way of starting SQL developer with specific arguments?
Kind regards,
stu

Irian wrote:
Usually the SetJavaHome points to the root directory for the JVM installation, this directory in your case appears to be
/Library/Java/JavaVirtualMachines/1.6.0_26-b03-383.jdk/Contents/Home
so try setting this in the SetJavaHome command for your SQL Developer (the bin folder will be added internally)
I'm not completely sure as i do not use macs, but it's worth a try.
Just had this same problem with Mountain Lion/SQL Developer 3.2.2, right after my upgrade to Mountain Lion. The path shown in Irian's response is what did the trick for me. The /System/Library/.... path shown by some others doesn't even exist on my machine. Interesting....
Earl

I just upgraded to Mac OSX Lion and can't attach documents to my hotmail. Can anyone help?

I just upgraded to Mac OSX Lion and can't attach documents to my hotmail. Can anyone help?

Hi there,
Over the last few days, this issue has been driving me up the wall too!
I downloaded Lion OS a few months ago, but it was only until a few days ago did i attempt to logon to Hotmail to check my account & send an email with an attachment.
Normally i use the MAC Mail app, which is synchronised to my hotmail account.
Anyway, I'm not sure whether the Lion OS is the root cause of the issue, however after much digging around on various forums - the issue for me was resolved by downloading the latest version of Microsoft Silverlight 5 (www.microsoft.com/silverlight). Its a free download....

My mac OSX lion is now very slow, any idea why?

my mac OSX lion is now very slow, any idea why?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Mac osx lion 10.7.4 lagging

Mac osx lion 10.7.4 lagging on macbook air after using for 30 to 40 minutes and when leave it alone for 5 min its again working smoothly.
plz help wht is this problem

Honestly I would never run both Win 7 & XP at the same time in a VM. 7 needs at least 4GB to run properly and uses more resources then XP.
I personally use VMware Fusion and XP. At this time there is no software, that I'm aware of or use, that does not run on XP. So for my Mac Win VM purpose I only run XP with the software in need to use in Windows. This work very well for me. I have 2 CPUs and 3GBs of RAM assigned to XP. Leaving the other 2 CPU cores, 4 HT cores, and 5GBs of RAM for OS X.
Not sure why you need, or want, to run both versions of Windows at the same time. I don't see the need as stated above.

HT4150 Is there a scannersoftware version fot Mac OSX Lion (7)

Similar Messages

Maybe you are looking for