HT4150 updated and now there is nothing comes on the screen?
I've updated and after rebooting nothing comes on the screen?
Updates are best done one at a time, in my opinion.
Reinstall with the 10.6 DVD again, and once installed ignore all the other offered updates (deselect them) and only update to 10.6.8. If that sucessfully restarts, then choose the other software updates one by one. That's my update voodoo rule No 1.
Don't use you computer while updates are being done. Just wait. That's my voodoo rule No 2.
Similar Messages
-
my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help
You can force quit by holding the power button down for extended period.
During boot up hold down the Option key and choose your Macintosh HD OSX.
In >System Preferences> Startup Disk>choose your internal OSX System as Default. -
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My brand new Ipod Nano is not being recognised on itunes and i cannot download music onto it.
\i changed to the new itunes and now there is nothing on the screen other than the music ie no options.
help please!Try a different cable. And are you connecting directly to your computer or through a USB hub?
-
When I was updating my ipod touch to the new iOS last night it died and now I have nothing but a white screen. iTunes no longer recongnizes the device and it won't turn off when I hold the power button or when I hold the power and home screen button.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?
Hey Todd Rubenson,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows unexpectedly quitting. The following resource may provide a solution:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M. -
I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable
That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
iTunes: Restoring iOS software - Support - Apple -
i took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer and it just has the apple icon on the screen. how do i get it to finish updating or turn on?
Why would you do that when your phone is updating?
Your phone is in recovery mode If you can't update or restore your iOS device -
My Ipad 2 is not working. Is not turning On. I dont' know what's happening. I'm trying to turn it on and I have no answer. Screen is out, nothing come to the screen. Battery is ok at 60% charged when I turned off last time, and after minutes when I turned on, it not worked anymore. If somebody have an idea what may happenning, please let me know.
I don't know what yu mean by "screen is out" but try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
My screen has a "10:01", a large battery symbol, and a right-pointing arrow on it. There is nothing else on the screen. It will not power off and plugging it in to the computer has no effect. Is my battery bad?
If you mean this sign, dont worry, you just have to leave it connected or charging for at least 2 hours.(80%)
After 30 minutes there will be some green area on the symbol, replacing the red area.
But preferably leave it charging for 4 hours till full charge.
Have a nice day! -
I recently did an update and now my iPad is stuck showing the cord with an arrow pointing to the iTunes icon. It won't let me clear this screen. What do I do to fix it?
Well, that illustration is suggesting you plug your iPad into iTunes (current version: 11.0.2).
Have you tried that? -
How to unlock a locked ipad It is locked and now i can not unlock it, the screen is not responding to my sliding the arrow to unlock. can someone suggest what should i do?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097 -
i have an iphone 5, i tried to restore it,and now it keeps showing me on the screen the 'connect to itunnes message'.What do i do?
Check the version of iTunes you're running. "Help >> About". It should be 11.1.1 if I'm not mistaken. Let me know if you're still having issues.
- JC -
I installed the latest update to my phone. Half way through it asked to connect to itunes. After updateing it had some type of error and wanted me to restore the phone. After restoring, another error box popped up and said that it could not be restored. Now it won't connect to itunes or my computer at all and is nothing but the black start up screen with the apple logo, or it's just a white screen. What happened?
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
Maybe you are looking for
-
Error .....SAPSQL_ARRAY_INSERT_DUPREC
Hi All, In our developement system,I am facing an error SAPSQL_ARRAY_INSERT_DUPREC in one of the Z program , which when ran in backgrond in goes to dump (job gets canceled) & the dump states the above error. In my program I am just uploading the data
-
How do I get the Adobe Flash Player 10 to Work (Windows XP SP3)?
I am a Premiere Elements user who occasionally exports the Timeline to Adobe Flash Video (.flv). And, occasionally I convert the .flv export to .swf with a free .flv to .swf converter. An installed Macromedia Flash Player 8.0 successfully plays back
-
Hi everyone I bought a wired Mighty Mouse back in April and while its great when it works, i have to clean it at least twice a month. Now the scroll ball wont work when scrolling down. It used to work when i cleaned it but now it just wont work. I
-
Hi All, Newbie to osx server and servers in general so I am alittle lost. However, I am not a neophyte when it comes to computers (just saying, so you don't have to explain the terminal environment, etc.). Here's my setup: My internet is DSL (ATT) an
-
Problem in configuring Apps in sharepoint 2013
i am configuring Apps environment on SharePoint 2013...although I have followed several articles explaining the configuration but I am not been to set it up...I tried both methods i.e. by creating new domain and by creating child domain. Below is th