HT4199 how do I fix it when "another device is using computer IP address" and I can't get wireless to work anymore? It used to work fine.
How do I fix it when "another device is using computer IP address"? Airport used to work fine. I've already tried turning everything on and off several times.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.
Similar Messages
-
How do I delete and iCloud account that has a former email address and I can't remember the password. All attempts to recover the password have failed!!
Hello there, Gary7023.
The following Knowledge Base article made prove useful for you with the issue you're having:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
"Another device on the Network is using your computer IP address" is plaguing me. What can I do to correct this? It seems to come on after it has been inactive for some time.
Hi Delores,
What Encrytion does your Router/Modem use?
This might mean your Mac is set to a Static/Manual IP instead of using DHCP to request an IP, or another device is starting up with a Static IP & kicking your Mac off the Router.
If this is Wifi/Airport with little or no encryption,it could be somebody outside causing it.
How many things are connecting there? -
Was connected to 360 when 360 died. Now Ipod is locked and I can't get it unlocked.
Ipod was connected to 360 xbox when the xbox died. It now says I have 22,000,000 minutes before I can unlock it. I never had a lock code. What can I do to fix this.
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I am able to view rental movie on iPad but when I switch to Apple tv the picture is frozen along with the play button
you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck. -
My iPhone is in recovery mode, I was trying to update io5.
Do what it states and restore the phone.
-
How to change apple ID on newly set up iPad ? Used my friends pc as iTunes had stopped working on mine and now his apple ID is showing as the default ID for iTunes and I can't get into my iTunes account ?? iCloud is fine , just iTunes that I can't seem to change defiant user id.
Settings>Store>Apple ID. Tap his ID and sign out. Sign in with your ID. If you are in iOS 6 it is Settings>iTunes & App Stores>Apple ID.
-
When I open safari http//yesdateme pops up and I can't get rid of it or continue on into safari
Force Quit Safari, then re-open it while holding the Shift key.
-
Missed one letter at the time of creating account for icloud. how do i fix or create another email account?
Hi jtv123,
Could you please tell us exactly what happens when you try to set up your account?
With kind regards,
David -
How do I fix iphoto when it crashes every time i try to import
How do I fix iphoto when it crashes every time i try to import
By doing stuff.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
How do I fix it when Facetime freezes,shakes, then turns to green?
How do I fix it when Facetime freezes,shakes, then turns to green?
The memory that is low is the processor memory, not the overall storage space. Next time, before you go to that site, double tap the home button to see the task bar. You will see the list of apps siting in the recently used list. Most of them are not doing anything, but some of them are using up memory. Touch and hold any one of them until they jiggle, then close them all off by touching the minus sign.
Do that every so often to help the pad use it's memory wisely.
Some apps, and browser pages use a lot of memory, and do not give it back easily, causing what sis happening to you.
You can also get a similar result by rebooting. Press and hold the home and sleep buttons until the apple logo appears, ignore the red slider. -
How do i fix it when it said connect to itunes to use push notifications
how do i fix it when it said connect to itunes to use push notifications? pLease help
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
How do I fix it when an album won't play on my ipod but will in itunes?
How do I fix it when an album won't play on my ipod but eill in itunes?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
How do I fix my iPhone it keeps freezing on the pass code and the home button reset does not work
error 3194
I can't update my phone and I AM using the latest update of Itunes AND have restarted computer and followed everything. I'm to the point of booking an app't with the genius bar because I'm finding apples instructions and this latest update to be a complete waste of time. -
I don't know what I did, but Aperture no longer sees my HD as online, and I can't get my photo versions since the HD is not online. I see it in Finder and can see the original files and even copy them from Finder, but Aperture no longer recognizes the HD, and when I try to work with the picture, it doesn't let me because it says that the master is in a volume that's offline. Does someone know how to fix this?
Just to clarify:
Does Aperture not see the drive at all (that is, does Aperture also not see the drive in the import and export dialogue) or are only the Master Files disconnected?
If Aperture does not recognize the drive at all, check the permission settings of the drive in the "Get Info" panel and make sure you have read/write access, also the "Ignore ownership on this volumn" checkmark, this should be set.
If correcting the permissions does not help, make sure you have a backup, and then use "Disk Utility" to run a check and to repair the volumn, if necessary.
If Aperture can see the drive on import and export, but only does not see the master image files, then try to reconnect your masters.
Create a smart album or use a Search with the rule: "File status: offline", to select all images that need reconnecting to their masters.
Right click on the first image of the selection.
From the Pop-up window select "Locate referenced Files..."
Now the "Reconnect All" button should appear.
Click it.
Maybe you are looking for
-
How I fixed iTunes 5 and Updater 2005-09-23 problem
After a frustrating couple of weeks I have music back on my iPod! (BTW, I drove to an Apple store 60 miles from home and the Genius told me that if this was a major problem Apple would shortly be releasing another update to fix what this update broke
-
Headphones usage with Satellite L670D-105
Data: Toshiba Satellite L670D-105 Windows 7 64 Realtek HD Audio Manager I am trying to plug in a headphone, but it does only work partially. Most of the above Realtek software is not available to me. In other words the earphones work, but I cannot ac
-
I want to buy a macbook pro but ???
i have posted a thread here in 17/12/2008 but it doesn't show up i waited three days also doesn't show up where does my post go ????
-
Hi all, I have a pair of statements connected by a UNION, where I need to sort the final result according to columns not appearing in any column list: SELECT REF(d) FROM DOCUMENT_TABLE d WHERE d.header$.parentKey = ? UNION SELECT REF(d) FROM DOCUMENT
-
Ale / Idoc Customer master
hi all, i am working with ale/idoc . from one client i am sending customer master data using DEBMAS I have checked in IDOC for contact person it is not picking fax number and email and telephone number it is picking from KNA1 table reagrds, mohd.