HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help
Should I use a network switch and plug my Yamaha A/V receiver and Yamaha DVD into it, then into the wireless router? Then the net into the routers net port???
HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help
Similar Messages
-
I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back yard and it will boost our wo
Ireless signal and also send my music to the airport express? Or does the airport express work as a stand alone hub?Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods -
I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly
Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay -
Tried all 6steps to Error Message: An error has occurred when attempting to change modules-Please help thx
Hi, I¹ve been through it again to ensure I¹ve not forgot things. Completely
removed Lightroom and all files I can find, etc and reloaded. Some tedious
result. Step 6 is too time consuming at the moment for me, too many things
on the go since I¹m about to go on holiday and on return I shall need
Lightroom on this iMac. Any clues? This iMac had Mavericks from new,
uploaded to Yosemite and then loaded Photoshop CC, Lightroom etc and get
this damned problem.
Reading around the web I¹m not the only one with this issue, to suggest a
new user a/c is a soft option without resolving the issue.
I hope an expert from Adobe can resolve this,
Regards, George (retired IT Manager and IT Systems Project Manager) -
Bought a Netgear wnr2000v3 wireless router and set it up but could not get an internet connection.
After setting up the Netgear wnr2000v3 router and powering, indicator lights, on the router, are supposed to be green to indicate power is on and router is connected to dsl through to modem. The lights are not on and no connection can be made. The Netgear instructions advise me to contact my isp in this case. I connect to aol via firefox. Can you help? Is this a possible permission issue?
Try this forum for help. Probably a setup issue with the MAC address.<br />
http://www.dslreports.com/forum/netgear -
I can't insert attachments or edit them from previous mails when I am in hotmail. The insert bar remains passive. My hotmail works fine using explorer.
The Yahoo! Toolbar and the Babylon extension have been reported to cause that problem. They seem to invisibly extend downward over the top of the web page display area. Disable or uninstall those add-ons.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
*See --> https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
Anyone else have the same problems? or can help me
That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36) -
Something happened to my Netgear wgu624 wireless router
I have a Netgear WGU624 wireless router that seems to have stopped working today. I had my cable modem connected to it and it was creating a wireless network for my three computers.
I had to switch to plugging the ethernet cable directly from my cable modem into my macpro so I could get online.
I'm not sure what the problem is with the router but I don't seem to remember the a & g lights blinking before like they are now. I tried plugging the an ethernet cable directly from my router into the second ethernet port on my macpro (with the cable modem plugged into port 1) to see if I could access the router by going to 192.168.1.1. No luck, the browser says "failed to open page".
Is there some way to check to see if the router is bad? We did have a storm today. Everything else is fine though...
Any thoughts would be appreciated.Good choice on the Airport base Station.
Especially, since that netgear was so hard to manage.
You may have gotten a spike during your storm, but you still didn't give us enough information to be useful
You should have seen a router address in network prefs, yes.
Aaah, naples. My grandparents bought a little condo on Gulf Shore Blvd, across from Edgewater Hotel...in 1968. (2br, 2ba, facing hurricane harbor, $23K) You don't want to know what some of these condos are selling for now.
We've been regulars on the beach for the past 40 yrs. Hard to watch some of the older places scraped, and those $8mm McMansions popping up, but what's more phenomenal are the changes up and down the trail. I mean between naples and Bonita, whoa! And the growth out towards Marco and out ON marco.
Nice -
don't have an airport card- do have netgear n wireless router -unit is an imac g5-power mac 8,1-cpu g5 3.0-proc 1.8-mem 1.5-os 10.4.11 what airport card should I get ?
Look HERE to find the appropriate airport card - you can use an Airport Extreme card.
And here to buy one. -
HT1731 Help installing Airport Express with Netgear N150 wireless router? I hav
Hi,
I just purchased the newer Airport Express (new) and am having issues using it in client mode with my Netgear N150 wireless router. All I want to use it for is streaming itunes from my aluminum macbook to my home stereo system, wirelessly.
I have followed the instructions that came with the device. No luck. I have followed the instructions that describe plugging it into an ethernet cable here:
http://support.apple.com/kb/HT1731
With the apple instructions linked above it would connect fine to my existing wireless network, using airport utility, with 'excellent' connection, but when I tried to switch in itunes to my device from my computer i get the pinning wheel and an 'unknown error' occurs.
I have setup a new wireless account and password on my router as desribed at this page, but do get confused when it tells me to use the hex key and $. Haven't worked that out yet. Any advice would be appreciated if this would help.
http://hints.macworld.com/article.php?story=20041017233832771
At best, after hard resetting the device several times, and following the instructions above at macworld, it now finds the device but only plays one blip second of a song, flashing amber from solid green, sometimes playing a second blip of a song, then pausing the song and switching to a flashing amber. By restarting my computer or opening AirPort utiliy I am able to find it again, but it either only plays one second of a song and drops again or turns green and is not able to be found at all by itunes (the button doesn't show up in the menu).
This is the second airport I have tried in 2 years. I purchased a used one and had nearly the exact same issues with a linksys router. Then it would play an album but reset if a song was paused.I had to hard reset it nearly every time i wanted to stream from itunes to my stereo. I assumed it was broken and sent it back. Figured I 'd give it a new go around with a new unit since i just moved into a new house and am now shocked at how difficult it is to set up. I have never had this many issues with an apple device.
My questions:
1) How can I set this up with my existing router? What am I doing wrong?! Why is it so difficult?
2) If not possible, what routers are compatible? I would gladly get a new router in order to stream music to my stereo from ITunes.
thank you for any assistance. i am pulling my hair out.Try temporarily disabling the Windows 7 firewall, and then, try accessing the AirPort with the AirPort Utility again.
-
Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
Making sure everything is allowed through firewall
Rebooting phone/laptop/router
Disabling ipv6
Disabling all networks except the one curently on
Re-installing iTunes
Restoring iPhone
No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).
-
Just moved from Canada to Switzerland. Can I just plug in my Desktop and get started?? I've travelled with my laptop before so know that it is that easy!! Just not 100% sure about my desktop!!
You can, but the power outlet type may differ. All Intel Macs have no trouble understanding current from 110 to 250V
-
I have an Airport Extreme wireless router & I can not connect my Kindle.
I have an Airport Extreme wireless router & I can not connect my Kindle. Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet. It says the password is incorrect. I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly. I see no tab to create a guest network. I do not mind giving my password to visitors, but that does not work.
If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab: -
Ipod Touch 16gb wont connect to my wifi anymore. Others can connect to mine and my Ipod can connect to all other locations except mine. It used to with no problem. I have restarted my Mac, my router and Ipod many times and nothing works. Help
My paper work for my linksys says WEP 64 bits. I've tried changing my IPOD to that and it will say put in password and when I do I get "invalid password" or can not connect. This has been in the last few weeks. I have researched this for the last 2 weeks, called apple and they said it's not my IPOD, called Linksys and they want to charge $30 to fix it. How do I change my router without totaly not messing it up?
-
How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?
Oh, and it is on a macbook pro
Maybe you are looking for
-
I'm having a devil of a time with my Preview scans. 1. Is there a way to SaveAll scans that end up in a Preview Document? I have a bunch of tif's (sometimes these come in as a Document Feeder and sometimes they are a series of hand placed originals.
-
No volume or music - home button not working. Please help!
So, this problem just started today, COMPLETELY out of the blue. I don't think I touched or did anything, I simply picked my iPod up and for some reason I couldn't hear sound and on my music, there was no volume bar. I could not adjust volume or hear
-
I write VB apps that create web pages for international sports scoring systems, and these must be able to show Latin, Cyrillic, eastern names etc. that require 2-bytes for some characters in the text. This means saving in UTF-8 to avoid 8-bit ASCII f
-
I'm having performance issues with Oracle SQL Developer. I tried both and 1.5.4 and 2.1.0 (installed in Windows XP Professional) and both work very slow. When I connect to the same database in Apex or just the webconsole, performance is OK, so I thin
-
How to activate class method???
Hi All, How to activate class method? Class Name - CL_HRCE_MASTERSWITCHES Method name - CHECK_RELEASED In se80 this method is showing red, means it is inactive. Please guide me how to turn it to green? And there is commented code "* ce_is_released =