HT4199 my wifi is not connected on my iphone and when i try to connect it does not recognise my password
my wifi is not connected on my iphone and when i try to connect it does not recognise my password
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Similar Messages
-
I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much
Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect. -
hey.. i have a ipod touch 2 gen and when i try to connect to wifi it cant find it,
even though my laptop does so it not my router..
can anyone help me??Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Otherwise
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Not the the 2G can only see/connec to the b and g wifi bands. It does not see any n band networks. -
I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?
-
The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?
Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/ -
I have an iphone 4s and when I try to connect to my shared library I see an icon of a circle that only becomes half full. It does not connect. I also have an ipad, which connects without incident. My itunes library is larger than the capacity of both devices, so that cannot be the issue. How can I get the phone to connect with my shared library?
My husband and I are using the same iTunes account on all mac & pc computers, but the libraries are different on each machine. We always manually manage our music (no auto sync). iTunes is up to date on the PCs. My husband uses our joint iTunes account on his pc, but once again, has a different collection in his library from those on the other machines. He can't load any music from his PC to his iphone 4. I can load music from my mac library to my iphone 4s, but cannot load from my pc library to my iphone 4s. How can I switch my main library that it syncs with from the mac to the pc?
Thanks -
Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.
Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
Also make sure you close all other applications except Logic to ensure it is not running in slave mode... -
I did not use my computer yesterday, and now all of a sudden, Firework does not open at all after clicking on its icon or starting as a program. I did not download any upgrades or anything else, and I have Norton 360 version 3. I can open Internet Explorer, but that's not my default browser, so I have no problem with the Internet connection.
What could be the problem, how can I restore my browser without losing my bookmarks, settings, etc?
== Operating system ==
windows XPIf you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]]. Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Update Firefox, see [[Updating Firefox]]
-
I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
-
i reformatted my mac pro from lion back to snow leopard how do i get my music back. i have it on my iphone and when i sync up i still do not have my music on my mac how do i transfer it back to my mac.
Wow, you didn't make a backup of your files first?
You shoudl have come here first for help before doing that.
https://discussions.apple.com/message/16276201#16276201
All I can say is make sure you have the same account name on the computer like before, even if you have to create a new user under System Preferences>accounts, then log into your itunes account with that and try to reverse sync from the iPhone like you would normally.
Apple doesn't expect one to go backwards, so they are not all that friendly, you may have to ask around on MacRumors for third party software that can reverse sync from iOS devices.
Good luck -
I had backed-up my iPhone and when I try to restore it it says that the back-up is corrupt or the iPhone is not compatible. I had a bunch of pictures that I need from that restore. Is there any way to get them back? I did the back-up to my Macbook
If the backup is corrupt, there is nothing that can be done.
For what reason did you choose to not copy the pictures off the device to a computer prior to attemping an update or whatever caused the need to restore? iPhones are not intended as sole storage of any media. -
my iphone 4 says activation required and then connect to itunes and when i try to connect it wont what do i do (i cant use it at all) :'(
i got it from O2... and it dosent do anything when i plug it into my laptop it dosent come up at all or connect to itunes
-
I found my old ipod touch and it says the ipod is disabled and to connect it to itunes but when i try to connect it to itunes it says cannot connect cause ipod has passcode but i cant unlock passcode cause ipod disabled. Please anyone have an idea?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
when someone calls me on Viber, WhatsApp and elsewhere do not appear on my iphone, and when you enjoy my photos on instagram also does not appear to do I do, take the technical assistance?
What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
I just downloaded a new version of OS7 to my iphone and when I try to sync with my mac book pro it will not finish and just spins around at the last step. anyone help?
It was telling you that you needed Mac OS 10.6.8 or later, not itunes 10.6.8
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later"
http://www.apple.com/iphone/specs.html
Maybe you are looking for
-
Problem in View Maintenance - Prompting for a request
Dear Experts, We have upgraded from 4.6c system to ECC system. i have a table maintenance generator for a Z table. it has been transported across systems ( DEV, QA). now when i try to edit some data in that view using SM30 and saving it... its promp
-
Hp psc 1350 all-in-one /wi fi enabling
I have an hp psc 1350 all-in- one printer. My desktop is a dinosaur and won't handle broadband internet. I now use an Apple iPad tablet on wi fi and don't want to purchase another printer. Is there a way to make my printer work on wi fi with my table
-
Hi Maximum number of characters that a string data type accepts in Java. Thanks..
-
Package Load Failure VS 2008 Architect & 11.1.0.6.20
I have a virtual machine running Windows Server 2003, IIS, and Visual Studio 2008 Team Architect. When I try to install "ODAC 11.1.0.6.20 with Oracle Developer Tools for Visual Studio" I get an error "Could not start the OracleMTSRecoveryService serv
-
Is there a way to retrieve Entourage email after installing lion?
Is there a way to retrieve Entourage email and files once I have installed Lion??