HT4199 WHAT PORTS DOES APPLE TV USE?
WHAT PORTS DOES the APPLE TV USE?
Google "Apple TV ports" and you get
<http://support.apple.com/kb/HT2463?viewlocale=en_US&locale=en_US>
Similar Messages
-
What port does podcast capture use????
I cannot find any docs on this. I can use Podcast Capture/Podcast Producer when I am IN the network, but not when I am away from the office.
What ports can I open up on the firewall to make this work from anywhere???Click here for information.
(32067) -
What ports does icloud use for mail?
What ports does icloud use for mail?
Read > http://support.apple.com/kb/HT4864 iCloud uses 993 for IMAP and 587 for SMTP
-
I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem... -
What ports does iTunes update podcasts over?
Hiho
Lately I never succed in updating podcasts while using my 3G data ISP. I suspect they block ports. What ports does iTunes require to download new podcasts?
/peterHi Jan,
I am sure the Apple Doc is right.
The Doc was originally written for iChat 2 when you could only chat 1-1
Obviously with an eye on the future, and of the potential for the data traffic to get busy in some locations, allows for the extra ports allocation.
If you are in a 4 way Video chat then that would be 16 ports.
Now in iChat 2 Audio chats used to make use of the same four ports. But as 10 way Audio chats are possible it seems likely this has been changed in multichats to use all twenty ports.
( I am also sure that 16384-16403 is 20 ports )
10:01 AM Saturday; September 1, 2007
Message was edited by: Ralph Johns (UK) -
What port does WRT1900Ac listen on for remote admin
good morning,
I have had a few problems with linksys smart wifi (periodically cannot connect).
traditionally I run dynDNS so I can connect to devices remotely (using port forwarding) and this works fine for me.
what port does the linksys router itself listen on for remote router admin requests (i.e http://publicipaddress:whatport)
also, is this configurable?
thanks
Dandanielgwalter wrote:
good morning,
I have had a few problems with linksys smart wifi (periodically cannot connect).
traditionally I run dynDNS so I can connect to devices remotely (using port forwarding) and this works fine for me.
what port does the linksys router itself listen on for remote router admin requests (i.e http://publicipaddress:whatport)
also, is this configurable?
thanks
Dan
You have to use a Smart Wifi account for remote administration on the WRT1900AC
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
What software does apple have to replace DVD Studio Pro
what software does apple have to replace DVD Studio Pro. have a new imac 27" late 2012 and after data transfer DVD Studio Pro does not work. What can I do? Would it be advisable to go back on the OS to a older vision OS Where DVD Studio Pro was working? Help!!!
Bigdog30 wrote:
what software does apple have to replace DVD Studio Pro.
Afraid they don't have anything to replace DVD SP. Your alternatives are Adobe Encore (which is EOL) or Toast, or IDVD (which can still be found in boxed sets of iLife).
But getting back to DVD SP and your data transfer, what do you mean by that? What exactly did you do and what happened with the application? I'm running it on 10.7 and it works, but it's from the FCS3 suite; is yours FCS2?.
Russ -
HT203167 What software does Apple have to manage Dvd to ipod conversion etc
what apple software supports Dvd to ipod/ipod to computer conversions etc
Bigdog30 wrote:
what software does apple have to replace DVD Studio Pro.
Afraid they don't have anything to replace DVD SP. Your alternatives are Adobe Encore (which is EOL) or Toast, or IDVD (which can still be found in boxed sets of iLife).
But getting back to DVD SP and your data transfer, what do you mean by that? What exactly did you do and what happened with the application? I'm running it on 10.7 and it works, but it's from the FCS3 suite; is yours FCS2?.
Russ -
Equium A100: What port replicator can I use?
hi
i have an equium a100-306. can anyone tell me what port replicator i can use that will give me Parallel / Serial ports ???
regards geezaHi
Please check these offers:
Dynadock - Universal USB Docking Station with Video (DVI) PA3542E-1PRP
Dynadock - Universal USB Docking Station with Video (VGA) PA3541E-1PRP
USB 2.0 Port Replicator II (Ethernet / EU Version) PX1173E-1PRP
USB 2.0 Port Replicator II (Ethernet / UK Version) PX1173U-1PRP -
What ports does ACS 3.0 use
We run ACS 3.0 on a windows 2000 sp. 4 server. A nmap scan shows a lot of open ports, e.g. 7/tcp, 9/tcp, 13/tcp, 1050/tcp, and also some udp ports.
Does anyone know what ports the Acs use ?
Regards
Johann Folkestad
Volda Univesity CollegeACS ports for administration
HTTP administrative access (login)TCP 2002, ACS distributed logging TCP 2003, Administrative access (after login) port range 1024-65535 (its possible configure)
Than RADIUS and TACACS+ ports
Radius UDP 1812 and 1813 (or according old RFC UDP 1645 and 1646)
TACACS+ TCP 49
M.
Hope that helps, rate if does -
What does Apple site use to compress the videos to make it look like DVD?
What compression program do they use for videos on apples site to compress these videos. They look crisp like DVD Quality? How and what kind of settings do they use?
My videos look like crap after being compressed and even crappier once uploaded on YouTube.
I used H.264 800Kbps Streaming in Compressor 3 to compress.
Camera used: Canon XL2 with 16:9, 24p.
NLE's used: FCP or Avid MC3.
Guys, how can I make my videos look as good as DVD while keeping the size low.
How should I set my properties?
Is their a tutorial on the web?
Someone please help!
Thanks,
Ziahttp://www.kenstone.net/discussions/read.php?3,8699,8699#msg-8699
-
What ports does OBIEE use, ect 9703.9704, ect
Where can I find the information on all of the port that Oracle OBIEE uses in one document.
Hi,
Did you review the OBIEE documentation?
Oracle Business Intelligence Documentation
http://www.oracle.com/technology/documentation/bi_doc.html
Please see if these links/docs help.
Note: 759312.1 - How to change the ports by default of oracle bi and oc4j (9703, 9704 and 9705) ?
Note: 550441.1 - How to change default port 9704 of OC4J
Note: 446852.1 - How To Assign Unique Ports When Installing Multiple Oracle Business Intelligence (BI) Discoverer 10g (10.1.2) Instances On A Single Host
Changing OBIEE default port
http://asanga-pradeep.blogspot.com/2009/07/changing-obiee-default-port.html
Regards,
Hussein -
What protocol does air play use
I have purchased a Marantz MCR603 which is airplay enbabled but airplay keeps dropping out. I have been advised by both Apple and Marantz that my BTHomhob (3.0, the latest) does not support airplay protocols. BT,as usual, have no idea what I'm talking about. Can anybody advise?
AirPlay is an Apple propriety protocol stack and is based on the RTSP network control protocol. An AirPlay device, such as your Marantz, would have to work with one or both of the following two services: ROAP used for audio streaming, and AirPlay for video/photo content.
ROAP uses TCP port 49152 and AirPLay uses TCP port 7000. Note: These ports would not need to be opened on your home router as all streaming is being done on the local network, but both the Marantz and the iTunes host device must be able to open these ports to communicate. -
Hello. I've downloaded and installed Songbird for Mac desktop three times. When I try to open the application its icon briefly appears in the dock, but after several seconds it crashes without opening. My MacPro meets and exceeds the listed software requirements. Any ideas why the app won't open? According to http://www.zdnet.com/blog/open-source/what-might-end-apples-open-source-pass/313 0, "For those unfamiliar with the story, Apple began "protecting" its iTunesDB file (necessary for syncing) with a checksum hash in September 2007. This kept people from using other music programs like Winamp and Songbird, alongside iPod files." That's ancient history now, and Apple does even allow the Songbird mobile app for iPhone. There is no Songbird app in the App Store though, and attempts to open the desktop app file downloaded from Songbird's site result in the problem described.
Possibility: I have a large iTunes music library - 16K+ songs - would Songbird refuse to open due to potential stability issues with importing a library that size?
Found a similar issue on the Songbird support boards here: https://getsatisfaction.com/songbird/...
Based on that info I opened Terminal and entered
/Applications/Songbird.app/Contents/MacOS/songbird -ProfileManager &
This opened a small dialog box that allowed me to specify a default user (but would not allow the default user name to be re-named). I was then able to go through several windows and opt to have my iTunes library imported, to have several Songbird apps imported, and to not provide user details. The window then closed, and the Songbird icon again disappeared from the dock. Crash.
Meanwhile, the Terminal app now displayed
this.addToLibrary is null in SBPlaylistCommand_AddToLibrary ?!!
I then entered the original command again, opened the default user box again, but then the default user dialog box closed and again the Songbird icon disappeared from the dock. Crash.
Attempted to open Songbird from the Applications folder with the same result: the default user box appeared briefly, then closed and the Songbird icon disappeared from the dock. Crash.
Any other ideas that might help this to open, or does Apple feel threatened and is therefore preventing users from accessing the app?In Theory wrote:
Any other ideas that might help this to open, or does Apple feel threatened and is therefore preventing users from accessing the app?
Songbird working exactly how it should here under Mountain Lion 10.8.2 Maybe try uninstalling as per manufacturer's instructions and reinstalling most recent version. I would be hesitant to muck around with a non responsive program as such with Terminal before exploring other Troubleshooting Paths such as other Third Party conflicts. Have you installed any anti-virus software? MacKeeper, Little Snitch or similar? Can you post a crash report. That may help further.But definately working as it should here.
Cheers
Pete -
How much data does Apple TV use?
I am experiencing a large amount of data usage and cannot determine what the culprit is. I am approaching my cap of data allowance on a regular basis. Does anyone know how much data the Apple TV uses? I realize it depends on what you are streaming. I primarily stream Netflix (set on the lowest data rate)
ThanksI found this answer on NetFlix's blog sometime last year:
In the USA you have 3 video quality options: good quality, better quality, and best quality. Here is how much bandwidth they each use:
Good quality (up to 0.3 GB per hour)
Better quality (up to 0.7 GB per hour)
Best quality (up to 1 GB per hour, or up to 2.3 GB per hour for HD)
Depending on how many movies you watch this could have a huge impact on your monthly usage...obviously your ISP wants you to watch its own movies.
Maybe you are looking for
-
Sub-account cannot send email from Apple Mail
I've tried setting up two sub-accounts to send/receive email but no matter what I try, these accounts error out on sending email. Looks like they aren't recognized by smtp server. Is there a different setting for sub-accounts?
-
Ozzie, you mentioned you fixed this...
Re: Podcasts appear under Music not Podcasts Posted: Jan 5, 2007 12:56 PM in response to: camoracer Click to reply to this topic Reply email Email This was very helpful!! I downloaded a podcast in iTunes AND directly from the source and looked at the
-
How to use offset for select-option parameter ?
Hi experts could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters. following is my code SELECT-OPTIONS: s_prctr FOR vbs
-
Once i publish a captivate projects, where can i host
I see that I can publish to HTML5, is there a hosting platform for captivate projects?
-
I cannot get the alarm light to go off on my Canon MX300 printer.
I have tried holding down the alarm buttom and also unplugging and replugging the printer.