HT4208 Issue in my iPad
1) I can't viewing my featured in my iPad app store
2)I and when I send any messages from I message no one receiving my messages
Hope I can find a solution for it
Anyone can help ?
Similar Messages
-
Actually I have 2 problems: I cant find my pdf/ibooks on computer after backing up my iPad (they are on my iPad). I looked under Ipad, I Books, PDFs, and it doesn't show them on the computer. How do I manually transfer these files?
Also, I'm having issues with my Ipad turning off about every 2 minutes, and I want to restore it. I want to make sure all of the files are backed up before I restore. My trouble started when I was trying to update my IPad but it was taking too long (internet was scetchy) so I powered off...now Im having problems. I haven't tried to update again since this problem. Any suggestions? Should I restore? Should I update to 7.0.6? (currently 7.0.3).
Thanks,Try here:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer -
ITunes Match is on but IPhone 5 cannot access any songs stored in the iCloud. I have no issues with my IPad playing music stored in the cloud. All settings appear correct. ITunes Match is turned on on my PC. No matter what I do I cannot get get any music even when I try to sync tunes purchased from the IStore.
Hello mwbark,
The following article contains information that may be helpful in getting your iPhone working with iTunes Match.
iTunes Store: Troubleshooting iTunes Match
http://support.apple.com/kb/TS4054
Cheers,
Allen -
Can I update or fix the hardware issue with my iPad instead of a usb for my 2007 MacBook Pro
Can I update or fix the hardware issue with my iPad instead of a usb for my 2007 MacBook Pro
Have no idea what you are asking about. What hardware issue? What does a USB and a 2007 MacBook Pro have to do with it?
GB -
I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.
Mac OS X 10.9.2 was released today for this issue and others. Earlier versions are not affected.
See this Apple article - http://support.apple.com/kb/HT6114
You can use the Mac app store to do the update or download it directly from here - http://support.apple.com/kb/DL1725
Best of luck. -
Wi-Fi connection issues with my iPad & iPhone
I have a Linksys N750 Wi-Fi EA3500 router and up until a month ago, I never had any issues picking up a wi-fi signal through out my entire home. When I'm in my bedroom which is on opposite side of the house from where my router is,my wi-fi signal is strong on iPhone, however I can't search the internet, stream movies on Netflix or listen to Pandora. I'm also having the same issue with my iPad 2 and never had this issues a month ago. When I take my windows based laptop in my bedroom, I have no issues and the upload / download speed is fast. Please advise.
Restart your WiFi router by removing power to it for 30 seconds.
-
Wireless connection issue with specific iPads
There seems to be a wireless issue with specific iPads. I sat with an Apple Genius in an adjacent Peets Coffee. His iPad connected on the first try after entering the access code. I had been trying all day with my iPad. This was after the Genius had me "Reset Network Settings" to return the factory defaults. Still no luck at Peets with my iPad. The coffee shop wireless signal on my iPad was 1 out of 3 bars. Yet this same iPad continues to have no issue connecting at the office or at home.
That's interesting. We also have the 64 GB Wi-Fi iPad. It connects fine at home, but only got one bar at the coffee shop and wouldn't connect this morning. Haven't tried it anywhere else yet.
-
I rented a video but never downloaded it because of storage issues on my iPad,will I still be charged?
Download it to iTune on your laptop or computer.
-
Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source? Now that I'm on iOS 7, I either charge or use... Not both.
No problems here.
Edit...
My IOS-7 is on an iPod Touch. -
Updating to iOS 8.3 has caused a connectivity issue between my iPad and my Dual150 external GPS. Can I revert to a previous version of iOS?
The only way to get this working again is to downgrade to 8.2
Seems Apple does not have this on a high priority list and am not willing to buy something that works for a lot of money. The flying community who uses this for navigation is having a lot of problems with this issue. The position awareness is compromised. Hope they fix this quickly -
The Ap store on my iPad shows threr is an application update ready. However thhere is no update. My wife has the same issue on her iPad. What needs to be done?
There are countless posts about this. There's a problem at Apple's end and has been so for several days.
However, I have no trouble updating using itunes on my computer and later syncing to my device. -
I used to be able to connect my iPad to my house wifi network walking all over my house then one day it stopped. When i tried to connect to my network I would get an message saying "Unable to Join network". I found that if i was within 5 feet of my router it would connect and work just fine. At the same time I tried it at multiple other networks that I have before (girlfriends and other friends houses) and could not connect with same issue. Only place I can connect is my work wifi.
Can connect to wifi with my iPhone with no issues
I have reset my network connections
Reset my house router
Upgraded to iOS6iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
Try This - Renew IP Address:
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
At home I have a HP PC, netbook and Sony laptop with no connection issues. Last year I bought an iPad 1 for my wife. This year I bought an iPad 2 for myself. However, only one iPad can connect to the wifi home network at a time. If I am using the iPad2 then the iPad1 fails to connect to the internet. if the iPad1 is being used then the iPad2 cannot connect. I tried resetting iPad network settings for both, reset router, and updated both iPads to latest software/firmware yesterday. Right now the only iPad that shows any connection is the iPad1. The iPad2 does not see the home network or any other outside network. Any suggestions or ideas on how to resolve this? It is odd the network issues only affect the iPad's.
@dananova,
It sounds like you need to either increase the number of dynamic IP addresses your router will hand out or change some of your devices to static IP addresses.
Check the router manual on how to change the dynamic IP range of your router. If you don't have a manual, you can go to Belkin's website and download it.
To change the IP address of your iPads to static addresses, go to Settings > Wi-Fi and tap the ">" next to the name of your wireless network. DHCP should be highlighted. Write down the all the settings on the screen. Next tap the Static button. Enter the exact same information that you copied from the DHCP screen with the exception of the last 3 digits of the IP address. Enter a new 3 digit number in this spot. Generally the original IP address will end with a low number such as 009, so pick a number that is not that low but less than 255. I would suggest a range of 240 to 250, unless the original IP range falls near this range. Also make sure you use a different 3 digits for each device you set to use a static IP address. -
ICloud Backup Issues on iPhone & iPad Air: NOT Enough Storage (5 GB)
I've been a user of the free 5 GB of storage since its inception without any problems. I was backing up data on my iPhone and 3rd gen. iPad on a regular basis and never ran into any issues.
I recently upgraded to an iPad Air and set it up using a restoration and it went off without a hitch. The very next day I started noticing these warnings that I was approaching my storage limit even though I had not really changed the amount of data on my phone or the Air. I don't download lots of apps and basically only update them when necessary. I use iTunes Match, so I stream my music from the cloud so I don't have audio files on any devices, with the exception of my iPhone for those times I don't have access to wi-fi -- and it's always been the same number of files/same size.
(The iPhone is showing 3.5 GB in use and the Air is showing 1.3 as of this post).
I do have a fair amount of photos in the iPhoto stream as I'm always snapping something, but not to the point of being obssessed. And I always am moving them into iPhoto/Aperture and deleting them frequently, so I'm not talking about thousands of photos being on either device at any time.
In other words, I'm like the average user when it comes to the amount of data on my devices -- and am not going overboard where it's at the point that I know I have to delete things to make room.
I've scrutinized the file sizes of everything I possibly can in the settings on both devices yet I'm still getting the warning that I don't have enough storage space. I find it hard to believe that something during the process of setting up the Air pushed my storage over the edge to where I actually need to purchase space because I just am not seeing any deviation from what I used to do before setting up the Air.
I deleted the 3rd gen. iPad backup as well as any other old backups from iCloud which are no longer relevant each and every single time I've upgraded any device. I don't have anyone else using these devices other than myself so no one is downloading apps, snapping pix, or doing anything which would add data. I did a quick glance at the forums to see that lots of people have this problem - so I'm wondering if it's some type of glitch?
My iPhone told me today that I had not backed up to iCloud in weeks - which I'm sure refers to the time right around I bought the Air - as I have my devices to auto backup when connected to wi-fi. The last backup according to settings was 5/6 -- while the Air was on 5/16.
This is very annoying as I don't want to have to buy the next level of storage just to rid myself of this message so I'd be interested to know what others have tried. Sure, I can just do a complete backup of all my devices to my computer -- which I do fairly regularly -- but it was always good to know that I had access to iCloud backups for those times I didn't hook things up to my MBP.
Does anyone have any suggestions as to things I can try to rid myself of this dreaded message? It pops up daily and I really would love to fix it. Thanks!I think I figured it out. I went through my iPhone and turned off a lot of the apps that were slotted to backup and it appears to done the trick as the phone is backing up to iCloud.
The language needs to be broken down where it makes more sense of what's happening behind the scenes during these backups as I think it can be easily miscontrued that it's the data the various specific apps are using which is the issue at hand and not them apps themselves is what's causing the increase in size; some people may think that if they turn these apps off, they are deleting the apps from their devices so they leave them all switched on which ends up bumping up the size and ultimately eating up storage space.
I admit to not really paying attention to what the explanation was saying when I initially got the error message which made me initially post this. Now that I'm rationally thinking, I can see the problem of the disappearing space and am off to turn off a handful of apps on the Air to reduce the storage allotment even more -
Aperture 3.5 issue syncing to iPad & iPhone vs. Apple TV
Hi. Longtime user of Aperture, since v 1.5, and iOS, since the very first iPhone. I'm currently on the latest versions of all software, for Aperture, Mavericks, iOS and AppleTV.
I have several hundred projects and several hundred smart albums in my Aperture library, and I've always enjoyed being abe to display my photography by syncing to my iPhone, my iPad and AppleTV. I have never found the iPhone and iPad syncing to work to my satisfaction, but ultimately I've been able to get it to pretty much work. I'm now struggling with an issue that I cannot resolve.
Everything syncs fine with Apple TV.
However, when syncing via iTunes to both my iPhone 5 and my iPad 2, I get all sorts of issues - in that many pictures simply don't sync. For instance, I have a smart album called "Favorites - People" - but only 125 of 162 pictures in the Aperture smart album appears in the iPad album. For my "Favorites - Great Outdoors" smart album, only 42 of 53 appear in the iPad. I'm having these kinds of problems in many, many of my smart albums.
I've done the following to try to resolve the problem:
-rebuild Aperture library
-repair Aperture library
-update all Previews
-delete iPod Photo Cache
-completely restore iPad and iPhone to factory settings and start again.
No luck. Any suggestions?Don't have any solutions to offer, but I sympathize, because I have had that occur in the past. A few images simply refused to sync from Smart Albums, for reasons which completely eluded me. Very frustrating!
The problem seemed to have resolved itself, but I always suspected the problem was mainly with the system-wide media browser (whatever it's called).
Maybe you are looking for
-
How to implement "if/then/else" or "case" logic in a Statement Expression?
I need a loop in my test sequence, so I define a Locals.LoopIndex which is of type Number, and I also define a Locals.PromptMessage, which is of type String. Within the loop body, have a statement step, in which I want to assign Locals.PromptMessage
-
How do you redirect the user to a custom page after the "Save" button is clicked?
In SharePoint 2010, I could add the following code to a save button to redirect the user to a custom page. <input type="button" value="Submit" class="btnStyle" name="btnSave" onclick="javascript: {ddwrt:GenFireServerEvent('__commit;__redirect={/SiteP
-
The MOF Compiler could not connect with the WMI server
I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message: "The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with
-
Photosmart c4480 prints 2nd half of picture pink
I put new non-hp ink cartridges in--documents in black and white print fine, but pictures print the first part of the picture correctly but about halfway thru the printing becomes pink. I've tried cleaning and testing the print; things seem fine. I
-
Bought a season pass to "Revenge" tv show. I usually receive an email the next after the show aired on tv to say it is now ready to be downloaded. For the last episode, no email was received, and checking with the iTunes store says no downloads are a