HT4211 Why can't I get the cam on yahoo messenger to work on new iPad Air. All I get is series of green lines. , have reset iPad, reinstalled the app.
How to get cam to work on new iPad Air, when using YAHOO MESSENGER.
How to get cam to work on new iPad Air, when using YAHOO MESSENGER.
Similar Messages
-
HT1941 why i cannot use my web cam using yahoo messenger and face time?
whi i cannot use my web cam using yahoo messenger and face time?
PwmBoat,
This made me smile, because things like this do make me smile... I never make videos on YouCam, but I did this time, so I could test this one out.
You did not say what webcam software you are using...
======================================================================
Video and audio recording works on YouCam V3.5.1.4606
Make sure you have turned on a working microphone in Settings:
YouCam > Right-Side Settings >
Right-Side, Lower-Right, Select a working Microphone from the Drop down list
AND
CHECK "Capture with audio"
OK
You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too. (They have 3.x as well, but why buy what HP already gives you?)
==========================================================================
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur -
I did the latest software update and have the cam options to invite or view.
but screens stays black - I can see the other parties but they cannot see me
? what could be the solution .
thanksI did the latest software update and have the cam options to invite or view.
but screens stays black - I can see the other parties but they cannot see me
? what could be the solution .
thanks -
My iPad will no longer connect to my wireless sony speaker after installing IOS 7.0.4. I have reset the speaker and reinstalled through NS Setup but still no joy. Any advice would be most welcome. Thanks.
Hi,
When Zeen's battery level goes below 5 %; it tends to Reset to Default where it looses all the connections and sync to the printer or router.
So its very important to make sure that Zeen's battery does not go to low. To avoid this I would suggest to charge Zeen regularly.
You may try the steps below as of now and check the results.
We need to Factory Reset the Zeen making sure it is connected (Docked) on the C510a printer.
Once it is docked try the steps below:-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02844556&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Open the above link; and then perform the Factory Reset as shown in Solution Two.
Once completed try connecting to Wireless and check the results.
though I am an HP employee, I am speaking for myself and not for HP. -
How do I get Yahoo messenger to work
How do I get yahoo messenger to work on new iMac as well as find the menu items for video or microphone chat?
thought there was an easy answer... I get it to show up and I can see my contacts. I can even turn on my cam. What I can't see is how to join a room or use some of the other traditional menu items.
-
Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
Why can't I run the new upgrade? All I get is that I am not connected to the internet, even though I am connected???
If you haven't, try updating through iTunes while connected to your syncing PC.
-
Can someone tell me why can't I delete a picture of a text message conversation? I touch and hold a picture in IOS7.0.3; I touch More, I click the picture(s) and I click the garbage bin. The picture gets deleted, but then it comes back in a second!
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.
First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Why can't I share my iCal diary anymore with my work colleagues? I used to be able to send a link so the calendar could be viewed in any browser be it PC or Mac platform??
Ordinary webspace won't do - what you get is a text file: this is the problem - MobileMe took the file published by iCal and formatted it as a calendar. Presumably if you were running your own server as indicated in the help page it would do the same; but unless 1&1 can speficially provide you with a CalDAV server it's not going to work.
Do your colleagues have Macs? For those who do, they can subscribed to a shared calendar in iCal and it couldn't be simpler. Presumably Windows owners could do the same thing in a suitable calendar program; and this is a lot simpler solution.
Another route: according to this site:
http://www.makeuseof.com/tag/publish-ical-calendars-mobileme-os-server-mac/
box.net can do this for you. I seem to remember that this arose a while back, but I have a feeling that the poster then couldn't get it to work. I can't advise on that, but you might want to investigate it as an option. -
Why can't I open some of my documents on Pages even though I created them all on the same IPad with the same Pages ap?
I think I know the problem because I've had it myself. I didn't upgrade iWorks on my iPad, but after Apple made changes to iCloud (concurrent with Mavericks) any docs passing through it were modified and made unreadable. Even though, as you say, they were created on my iPad using the previous version of iOS Pages, which I didn't upgrade.
iCloud is the culprit, if your iPad settings had iCloud>Documents & Data enabled, the docs were modified and disabled in the cloud.
I made a further mistake. After I saw this happening, I didn't think to turn off auto updates, and Apple pushed the new version of iOS Pages onto my iPad. The result was that ALL my docs disappeared from the iPad, and from iCloud.com also. I have not been able to recover them.
I've been talking to the Pages engineering team about it. If they come up with an answer, I'll post it here. Meanwhile, get those older files backed up somewhere safe if you can. -
Why can't skype identify my camera - "lifecam HD-3000 microsoft ?
why can't skype identify my camera - "lifecam HD-3000 microsoft ?
Hi,
I would recommend you to perform the steps mentioned below and check if it helps:
1. Temporarily disable all the third party security programs and boot in
Clean Boot to exclude 3rd party factor’s effect.
2. Update your video card drivers and BIOS to the latest version.
Hope it helps.
Tracy Cai
TechNet Community Support -
when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?
What version of iTunes are you running on your computer? You need to update to the current version.
-
Why can't I see my camera roll in photo on my iPhone 4?
Why can't I see my camera roll in photo on my iphone 4?
Hi,
This Discussion could be Helpful...
https://discussions.apple.com/message/15280355#15280355
Cheers, -
Hi, Unfortunately my Laptop has died (which had my iTunes on it). I want to ensure my music on my iPhone 5 and my iPad Air are backed up. Also, I want to sort my music in the way I used to with iTunes. How can I do this with just these two devices, i.e. NO Computer? Can the iCloud help? Why can't I download iTunes (i.e. my library as I saw it on the computer) to these devices? Thanks to anyone who can help me here.
You can change the email address of one's appleID...
I'd recommend changing moms email to yours to get a good backup on the Mac
Then switch mom's back to hers
Then change your account to the same email you used.
I've done something similar when I needed to update my Apple account (one ID changing email addresses and phone)
Maybe you are looking for
-
JJust had problem corrected due to frozen imac, now HP printer will not print. Says it is not connected. What do I do to fix it?
-
PSE12 problem adding audio media to slide show
I have followed the instructions but can't get the music to show up in the audio elements organizer..
-
why not create a command that shows you how many miles the paket travel to distination . that way you can figure out your lentency right there base on the distance.. show distance x.x.x.x it will show you the distance from b/w the interface you are s
-
Creating database on multi cpu machines
Hello: I want to issue the create database statements on a machine that has multiple cpu. Would like to to know what are the parameters if any need to specify in the ora file and anything specific needs to be done in the create database statement and
-
[svn] 3571: Update SWFLoader ASDoc comment to remove &emdash and data type declaration .
Revision: 3571 Author: [email protected] Date: 2008-10-10 11:07:09 -0700 (Fri, 10 Oct 2008) Log Message: Update SWFLoader ASDoc comment to remove &emdash and data type declaration. ASDoc adds that automatically. Doc the new types in IndexChangedEvent