HT4235 i can't connect my iphone5 to my computer

please help to connect my iphone to my computer

Hello Sir,
iOS: Device not recognized in iTunes for Windows
iOS: iOS: Device not recognized in iTunes for Mac OS X
Thanks.
1992ASA

Similar Messages

  • I can't connect my iphone5 to my Macbook Air via Bluetooth?

    Can someone please tell me why I can't connect my iphone5 to my Macbook Air via Bluetooth?
    Is this just the most ridiculous oversight or is there some underlying reason why this doesn't connect and function properly? How amazing would it be if I could just click on a contact number and dial from my phone like I could in 2008 via my Lenovo and my Blackberry. This blows my mind that two devices that scream compatibility are far from it. From my bluetooth options it see my device, then sends a code, I confirm and then it briefly connects only to disconnect almost immediately. #fail #appleoversight #failfailfail
    Fix it or I'm going back to PC ****

    hansen21 wrote:
    Can someone please tell me why I can't connect my iphone5 to my Macbook Air via Bluetooth?
    Is this just the most ridiculous oversight or is there some underlying reason why this doesn't connect and function properly? How amazing would it be if I could just click on a contact number and dial from my phone like I could in 2008 via my Lenovo and my Blackberry. This blows my mind that two devices that scream compatibility are far from it. From my bluetooth options it see my device, then sends a code, I confirm and then it briefly connects only to disconnect almost immediately. #fail #appleoversight #failfailfail
    Fix it or I'm going back to PC ****
    Really hashtags in a support forum, what do you think this is a social media forum?

  • TS1474 I would like to transfer the music that is already on my iPod touch to a new computer.  At present, my iPod touch is not recognised on the new computer.  How do I resolve that so I can literally connect it to my new computer and transfer all my mus

    I would like to transfer the music that is already on my iPod touch to a new computer.  At present, my iPod touch is not recognised on the new computer.  How do I resolve that so I can literally connect it to my new computer and transfer all my music?  Any help is much appreciated.

    I would like to transfer the music that is already on my iPod touch to a new computer.  At present, my iPod touch is not recognised on the new computer.
    It doesn't quite work that way. Transfer your music from the old computer to the new one. Then, sync the iPod.
    iTunes: How to move your music from one computer to another:
    http://support.apple.com/kb/HT4527

  • I have never connected by iphone5 to my computer because the computer was broken. Now its fixed. Will I lose all the photos and texts on my iphone5 if I restore from last backup of my old 4s?

    I have never connected my iphone5 to my computer because the computer was broken. Now that it is fixed, I want to know if I will lose all my photos and texts on the 5 if I restore from last backup of my 4s?

    If you restore to an older backup, you will get the content that is in the backup. Everything on the iPhone will be erased and you will be brought back to the time that backup was made. See this document prepared by another user about syncing to a new computer https://discussions.apple.com/docs/DOC-3141

  • Can I connect my iphone to a computer monitor?

    Can I connect my iphone to a computer monitor and use apps like Garage Band on a bigger screen with the help of a mouse and a keyboard?

    Yeah you can display it, but you cannot connect a keyboard/mouse or anything else to it. http://amzn.com/B009WHV3BM and an HDMI Cord http://amzn.com/B003L1ZYYM and connect the hdmi cord to the monitor with the cable in your iphone and it gets displayed

  • Switched from DSL to cable modem. My Airport light won't turn green. Keeps blinking orange. No wireless now and can't connect to more than one computer! ?????

    Switched from DSL to cable modem. My Airport light won't turn green. Keeps blinking orange. No wireless now and can't connect to more than one computer! ?????

    Hmmmm.
    If you reset the AirPort Extreme by holding in the reset button for 9-10 seconds and then releasing, the AirPort should be back in default settings which would allow mutliple computers to connect to the LAN ports on the AirPort.
    Power off the cable modem for now and leave it off at least 15 minutes.
    With the AirPort Extreme still powered on, hold in the rest button on the back for 9-10 seconds and release. Allow a full minute for the AirPort Extreme to restart to a slow, blinking abmer light.
    Then, power off the AirPort Extreme.
    Check to make sure that the Ethernet cable from the modem is connected to the WAN "O" port on the AirPort Extreme.
    After the modem has been powered off for at least 15 minutes, power it up and let it run for 5 minutes by itself.
    Now, power up the AirPort Exteme and let it run for 2-3 minutes
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Connect an Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Express
    Click on the AirPort Exteme, then click Continue to follow the guided setup tp configure the AirPort Extreme.  You can use the same wireless network name, password, etc that you used before, or set up a new name and password, etc.

  • I can't connect my iphone5 to itunes

    Hi,
    when I connect my iPhone5 to Itunes the program says: This iPhone can not be connected because the necessary software has not been installed (translated from Dutch), etc.
    The thing is that my iPhone is fully update and has ios 6.1.4 running while iTunes is also the latest version. Installing the 64-bits version doesn't help at all.
    What kind of software do I need to install to connect my iPhone to iTunes again?
    Thanks for your help!

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    -Griff W.

  • Upgraded to ios7, and can't connect to my non-intel computer anymore

    I have an iphone 4, and just upgraded to OS 7. I have a non-intel mac which won't run the newest ituens, and now itunes can't connect to my iphone to add music from my computer. Is there any workaround besides buying a new computer (which I can't really afford to do)?

    Yeah, turn roaming on.  The work wifi issue may be a firewall.  Have you checked with your IT department?

  • Can only connect to Internet from one computer at a time on network

    I have a 2 computer network in my office networked with an Asante 10/100 hub. The computers are a iMac 24 (Intel) and an old G4 (PCI). The network has worked fine until just recently. Now, I can only connect to the Internet with one computer at a time...(DSL connection). I checked cables, ports, etc, and I'm wondering if this is a 10.4.9 issue. Coincidentally, I noticed that I am not able to access the Internet via Win XP using Parallels which also worked fine up until recently. I checked with the ISP (AT&T) who confirmed that all is OK on their end. Anyone have similar problem? Could OS X 10.4.9 be the culprit? Any help on this will be much appreciated. Thanks.
    iMac 24   Mac OS X (10.4.9)   2G RAM; NVIDIA GeForce 7600 GT 256

    I'd consider that a 3 computer network, Parallels being a virtual machine would alias the ethernet interface and need its own IP address. That may or may not have anything to do with your problem. Actually, the way you've described things, it sounds like a lot has to do with your contract with ATT. Is there a routing device at your end?
    The only way 10.4.9 could be the culprit would be if it were the routing device.
    -Phil

  • What am I doing wrong that I can't connect to a very remote computer?

    Maybe I just don't understand the definition of "remote" but I can connect to computers on my local Ethernet network, but when I attempt to connect to my dad's computer a thousand miles away, I get a "disconnected" or "offline" comment. He has Safari and Mail active, and we are looking at each other through iChat, so I KNOW he's online.
    He's 84 years old, and the communication is killing me, but I've had him turn on all the permissions in Sharing, so I can't figure out why I can't get on his machine. He's got a new iMac/Intel box, and I'm running a G5; we're both running 10.4.7.
    When I "edit" his information, very often the address turns from the number I've entered to "0.0.0.0." and I can't change it. Our IP numbers are only different by 50 in the last set, which seems odd to me, but I'm ignorant!
    According to the Sharing panel, the IP address is supposed to begin with "afp://" but that gets stripped out when I enter it - in fact, sometimes (but not always) it won't let me enter the slash marks.
    I'd appreciate any info you guys can give me.
    Thanks!

    what's this about 'consumer hubs'?
    i've tried almost every trick i've read, short of doing a complete dump and re-install of all software. i just can't get connected to someone over the internet. could it be their service provider doing the blocking?
    as i've only tried connecting to one other person's computer in one area of the globe it's difficult to say what the problem is.
    here's a thought for apple - have a dummy site (for us dummies) that we can access using ard, thusly allowing us to test our own settings to make sure the problem doesn't reside with us.
    any help would be great.

  • How can I connect to more than one computer from external ip

    Hi
    I have been using remote desktop for some time and have a port forward set so I can connect to our mail server from anywhere else externally from my macbook pro, but how can I connect to other macs in the office when there only seems to be the two ports available for use 5900 and 3283. I can only port forward to one computer? How can I connect to multiple computers when not within the same network? are there other ports available?
    Cheers
    Tony

    If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address.  ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, you can only get reports, push package/files to etc. for a single workstation.
    ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe,  need to install third-party VNC software on the systems (since the ARD client cannot listen on any port other than 5900 while other VNC systems can be set for other ports such as 5901, 5902, etc. You would then  forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
    http://docs.info.apple.com/article.html?path=RemoteDesktop/3.0/en/ARDC715.html  to connect.
    The only other options are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
    Hope this helps.

  • Can't connect to my Windows XP computer

    Everything worked flawlessly with the MacBook, but of course now that I bought the MacBook Pro and reformatted my MacBook, I can't get into my Windows XP computer. I turned off the Windows firewall to help in troubeshooting.
    I get the message: "The alias __ could not be opened, because the original file cannot be found." I can either hit delete alias, fix alias, or OK.
    It tells me I don't have sufficient privileges for deleting the alias, fix alias ask for me to choose which document I would like the alias to open (which is irrelevant because I want to connect to the Windows shared printer), and OK doesn't do anything.
    Please help, I'm pulling my hair out over this issue.

    If we could get some more information on the following:
    Windows XP ??(pro or home?)
    Anti Virus or Firewall applications installed (McAfee, Zone alarm, Norton, etc?)
    Your goal: File and printer sharing? Having the new Macbook Pro access the Windows XP computers files and printer.
    With Windows you have to setup the file and printer sharing wizard, so that it opens the ports on the computer to accept incoming commands from other computers.
    To accomplish that, you do the following:
    *Open up My Networking Places (by going to Start, then clicking My Networking Places)
    *On the left hand panel (Network Tasks), click where it says "Set up a home or small office network"
    *Follow the steps, hitting next
    For the first option, you could select Other, then....
    Select the option at the top "this computer connects thru network port, hub..."
    *click next
    *now, for the Workgroup name, you could put what you want for this. I'd prefer to have it named WORKGROUP, then click next
    *then choose the option to turn on file and printer sharing, click next, and let it do its thing
    *You might have to reboot after its done.
    <====>
    After doing that, now, on your Macbook:
    *Open up Your Hard Drive -> Applications -> Utilities -> and open Directory Access
    *Make sure the Lock is unlocked
    *Double Click on SMB/CIFS
    *In the Workgroup: type in the name of the workgroup you choose. In this case it was WORKGROUP
    *Hit okay, and close out the program.
    Now you should be able to click on your Network Icon, and you will see the windows xp computer name, and you will be able to click on it do what you wish.
    As far as the printing, I am going to look into it. I know that the printer requires some drivers to print thru the different operating system.
    What type of printer is it?

  • How many times can you connect ipad to a different computer?

    I have an Ipad 1 and when connecting it to my new laptop (not Mac) it told me the device could only be connected one more time to a different computer. Are there limits on Ipads as to how many computers or times we can connect them to? Is there any way to reset this or not?

    When it comes to apps, this is right, unless you use the Windows version of iFunBox (the Mac version, not even the latest version, doesn't work for direct IPA transfer). However, you can transfer / sync music / videos from several computers using third-party tools (without jailbreaking!!) with tools like SyncPod / FreeSync.
    You may want to read the section "A side remark: put music / videos / other media on your iDevice without iTunes" at http://www.iphonelife.com/blog/87/ios-contact-management-duplicate-removal-impor texport-etc-tips-and-tricks for more info.

  • How can I connect my iphone to my computer with the new upgrades? My mac (old) cannot support the new itunes and my phone can't connect to it.

    I have a macbook that I purchased in 2007 with operating system Mac OS X Version 10.5.8. I recently did the new software upgrade on my iPhone and now my iPhone and my computer cannot connect. I tried downloading the newest iTunes but it is not supported by my software. What can I do now? (Other than buy a new computer).

    Is the new iTunes library on a different computer, or the same computer?
    Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
    Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact.

  • Can I connect my iPad to another computer without losing anything?

    Hi everyone,
    My MacBooks logic board is basically dead, and I currently do not have the extra money to fix it. So I'm using a friend's old Dell in the mean time. My question is when I plug my iPad / iPod in to put songs/ other files on there, would everything be erased? I just wasn't sure if it would ask me to restore the iPad and iPod to connect to that computer? I don't want to lose anything I already have as I can only get on the macbook for a few seconds without it going to black screen again.
    Thank you for any advice!

    This is an extract from one of our senior participant; hope he doesn't mind me reproducing it here
    Syncing with new computer
    1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    2) Now connect your iPad to your laptop and start iTunes.
    3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
    4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
    5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
    6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
    If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.

Maybe you are looking for