HT4235 updated my iphone and now it locked my sim what do i do ?
My sim is locked after a back up and i cant unlock it
Updating iOS will relock devices that were unlocked via unofficial methods. Any legitimately unlocked devices will not relock.
Similar Messages
-
i went to update my iphone and now it says no sim grrrr and keeps telling me to connect to itunes which says no sim
Your iPhone is in recovery mode. Do the following to get it out of recovery mode.
Plug your iPhone into your computer with iTunes open make sure iTunes recognizes the iPhone in recovery mode.
Hold down the power button and the home button to do a hard reset and shut it off
Keep your finger on the Home button ONLY and unplug the iPhone from the cable
Release the Home button and allow the iPhone to power back on which may take a few minutes
The iPhone will return to its prior format
Hope that helps! -
I tried updating my iphone and now it locked itself
Why does my itunes say the simcard is not supported even after using the iphones orriginal simcard
youngmulo wrote:
Why does my itunes say the simcard is not supported even after using the iphones orriginal simcard
Have you been using a SIM card other than the original SIM card prior to it locking? -
Please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim
please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim. please i need help because i have to use my phone at the office tomorrow.
ASk your friend who unlock the phone for him/her.
ONly the carrier that the phone is locked to is authorized to unlock it.
bAse on your description, it sounds like your friend had his/her phone hacked to unlock it from the original carrier. -
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
I updated my iphone, and now it won't let me access an app...help!
i updated my iphone and now i cant access an app...help!
I do go thru safari and I get thru the log in into my account but when it comes to showing your statement it blocks it. I had no problems until I download the latest version.
-
I updated my iphone and now it won't turn on
i updated my iphone and now it just wont turn on! The apple sign comes up as if its going to turn on and the sreen goes darker and just goes blank. why wont it turn on? its been doing this for the past half hour
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
HT201210 I tried to update my iphone and now it won't work at all
I tried to update my iphone and now it won't work at all
Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808
-
my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?
Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
I just updated my iphone and now it is screwed up and has to be restored and I will lose all of my information. What can I do?
Uhless this program will get the iPod out of recovery mode you will have to restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
im trying to update my iphone and now its saying the server is unavailable so try connecting to itunes, once this is done it then says no sim is fitted?any ideas?
Lots of ideas... starting with, try a search of the forums for the issues that are occurring.
-
I was trying to update my iphone and now I can not activate it, it says no sim card installed.
What can I do now, help please.Ntmate68 wrote:
it's stuck on a screen that has a iTune and plug picture
See Here > http://support.apple.com/kb/HT1808
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766 -
i've just updated my iphone, and now I can't open no app, and can't sync music and photos. WHY?????
Have you tried the basics from the manual?
Restart, reset, restore. -
I recently update my iphone and now is not allowing me to access my contacts, emails etc. When I try to switch it on it has an itunes symbol on the front with the usb plug and an arrow. What do I do to get my contacts etc back and make phone calls?
To be more clear:
Was you phone hacked/jailbroken BEFORE you hooked it up? -
I updated my iPhone and now my whatsapp says I have no contacts (I had upwards of 500 before the update) Does anyone know how to retrieve my contacts?
Read here:
How to Recover WhatsApp Contacts on iPhone
Maybe you are looking for
-
Toplink 9.0.4.8 and JTS not rolling back transaction Hi Scenario: I have a session bean (EJB1) calling a session bean (EJB2). When an EJB1 is called, EJB1 persists data on to Table1 in database. And EJB1 makes multiple calls to EJB2 to create entries
-
HT4236 can I drag and drop files on to my ipad?
Can l drag and drop files to my new ipad or do l have to use iTunes? To be honest l find iTunes a bit user unfriendly. Thanks for any info
-
Netapp Docs connect error with cDOT
When trying to run NetappDocs against a cDOT array the script returns the below error. I'm able to SSH in via putty. PS C:\Users\t15jr5p> Get-NtapClusterData -Name '10.72.66.82' -Credential (Get-Credential) -Verbose | Format-NtapClusterData -Verbose
-
Hi Guys, I have a set in which I store some unique userdefined objects,say a "Color" object. So my collection set will look as follows: set<Color> objects. For example:- (color1) (color2) (color3) (color4) (color5) (color6) (color7) (color8) (color9)
-
hi all i am working as SAP Technical consultant, and novice in Enterprise SOA. i required guidance form u all , for a good start. i have read basic documentation of ESOA , require some small scenario so i can implement and test them. i al