HT4236 On iTunes what do I click on to start the syncing process?

Well i have to take my uipod in to get it worked on and they said to putn all my pictures onto my computer. i need to know how to do iot.

How to transfer contents of your device to your computer
http://support.apple.com/kb/HT1296

Similar Messages

  • HT1459 I have anew new ipod Nano. I am trying to download itunes. It seems to download and starts the load process and then stops on the final innstall screen.

    I have anew ipod nano. I am trying to load itunes. The download appears to work fine. The install seems to run most of the way and then freezes. Windows 7.
    I have tried the processseveral times. same basic results. a couple of time it says it finished but there was an issue and nothing installed.

    This is a Microsoft Windows Issue.
    From a MS Support Engineer:
    "Hi,
    ·        Is the computer on a domain?
    ·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
    Try the steps below and check if it helps.
    Step 1:
    Run the software setup file as an administrator and check if it helps.
    a. Right click on the setup file of the software that you are trying to install.
    b. Select “Run as administrator”.
    Step 2:
    Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
    Disable antivirus software
    Warning:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
    Step 3:
    a. Click Start, type "Local Security Policy" (without quotes) and press enter.
    b. Click on Software Restriction Policies.
    c. In the right pane, double click on the "enforcement".
    d. Select “All users except local administrators”.
    e. Click Ok and restart the computer and check if the issue is fixed."

  • My itunes wont start the sync process

    Every time I try to sync my i phone, it says cannot start sync process???

    Every time I try to sync my i phone, it says cannot start sync process???

  • So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

    So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

    you can try this thread maybe? https://discussions.apple.com/message/16217061#16217061

  • My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated

    My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated i think it has somthing to do with the battery but im not sure because it still turns on. Im for sure that its the ipod and not the cord or outlet and charger. somone please help!!!!!! I tried everything besides opening it up.
    I dont know what to do???????

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • HDMI cable connected from TV to Mac, what do I click on to get the movie on my laptop screen to show on my TV screen?

    HDMI cable connected from TV to Mac, what do I click on to get the movie on my laptop screen to show on my TV screen?

    When you first hook it up it will probably have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
    In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
    The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
    You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
    Or if you want to use the MacBook’s keyboard and trackpad to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

  • I have ipod classic,80gb,i cant restorit via itunes and when i click restore i see the error1439 plz help me

    i have ipod classic,80gb,i cant restorit via itunes and when i click restore i see the error1439 plz help me.is there any software to reset it

    Hello adifromba
    Try putting your iPod Classic into Disk Mode to force a restore within iTunes to get it to show up. The steps to do that are within the first article below, I have also provided a second article for further troubleshooting if it continues to not show up.
    Putting iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    iTunes: iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/TS1410
    Regards,
    -Norm G.

  • I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

    I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

    What happens when you try to sync?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
    Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

  • Unable to sync new iPhone 4s. I have iTunes version 10.6.1. Using Windows 7. My device appears on iTunes but I am not able to select the sync option and it does not automatically start the sync option when plugged in. Ive tried reseting the device.

    I am unable to sync my new iPhone 4s OR my iPod Touch 4 to iTunes.(this is the first time I am plugging them into iTunes) I have version 10.6.1. Both devices are up to date with the latest software version. Once I plug the device in, it is recognized on iTunes.The synce process does not start automatically. I am unable to select the sync option. I've tried reseting the device and restarting iTunes and the same problem happens. I have plugged in my husbands iPhone 3gs and the sync process starts automatically. I have also added my computer as an authorized computer for the new devices. What now?

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to be locked up on the 2nd song and will not continue to sync.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano;

    I downloaded the latest version of itunes and now my ipod nano won't sync.  The sync process appears to lock up on the 2nd song and will not continue to sync. I let it run all night the first time and it never went past the 2nd song.  I unchecked the 2nd song so a different song would be 2nd, no benefit; reset my ipod nano; shut down laptop and restarted a different time; shorted the number of songs to sync; all without benefit. 

    When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
    After updating te ipod see if there is a change in results.
    PS: make sure the device is active while syncing so keep tapping the screen.
    Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod

  • HT1414 I am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no

    am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no luck till now

    If it is asking for the screen-lock passcode then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Otherwise follow varjak paw recommendation

  • I synced about 50 books to my new ipad air 2.  When I click any other books, the sync starts all over again for all books (it shows 51 books syncing).  If I abort the sync, all of a sudden, all books are gone from my ipad.  I don't know why.

    I synced about 50 books to my new ipad air 2.  When I click any other books, the sync starts all over again for all books (it shows 51 books syncing).  If I abort the sync, all of a sudden, all books are gone from my ipad.  I don't know why.  I did not have this problem on my old ipad...or before I upgraded to the latest version of iTunes.  Any help would be greatly appreciated.

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • HT1977 I downloaded the itunes and I update it and also I downloaded many apps but when I am connecting my iphone with my pc and want to put the downloaded apps to my iphone and when I am sync them on step 3 the sync process is hidding, plz help me..

    Dear All, please help me.
    I downloaded the itunes and I update it and also I downloaded many apps but when I am connecting my iphone with my pc and want to put the downloaded apps to my iphone and when I am going to sync them on step 3 the sync process is hidding, I don't know what is the probleme please advice me/help me in this
    my iPhone version is 6.0
    regard...?
    Thanks,
    Abdullah Misrat

    Connect the device to the computer.
    Open iTunes.
    Select the content desired to sync.
    Sync.

  • I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

    I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

    Ignore.  I figured it out:)

  • My iPod classic won't charge. I just bought a new laptop with Windows 8 and when I plug in my iPod, iTunes will recogniandze it and will sync but after the syncing process ends the charging stops. Any suggestions?

    MyiPod classic won't charge. I just bought a new laptop with Windows 8 and when I plug in my iPod, iTunes will recognize it and sync, but will only charge during the syncing process. Any suggestions?

    rubicon53 wrote:
    I just bought a new laptop and my ipod nano will not stay connected to my computer.
    I cannot transfer any of my songs to my new laptop
    How to use your iPod to move your music to a new computer

Maybe you are looking for

  • Error message when trying to install Flash 10.0.45.2

    I am running IE 7 on windows XP. We had some issues with Flash active active control version 10.1.53.64 and higher so I unistalled 10.1.53.64 and downloaded the older version (10.0.45.2) from the adobe website but when I try to install it I get the f

  • BPM flow Proxy to File and then Acknowledgement back to Proxy or JDBC.

    hi All, I have to create an BPM scnario to get acknowledgement from receiver file adapter. Steps created in BPM are: receive -> send (Transport Acknowledgement is selected) as per blog /people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file

  • Grandfathered plan looking for a new phone with sim card

    I have a droid x2 which has no sim card. I want to get a new phone, or a used new phone, to not lose my grandfathered plan. All the phones I'm looking at have sim cards, which I've never had in the 15 years I've been with verizon. I want to make sure

  • RZ20 CCMS Monitoring.  Screen output without connection to user

    Hi, I've define several remote systems to monitoring in the Sap Solution Manager (with remote agent), from tr RZ20. When I clikc twice in one node or I try to see the properties I receive the message "Screen output without connection to user", and I

  • Changing Unity System Time

    Hi, I recently changed the date & time on the Unity 4.0 server, but I dont for some reason prompts pickup the old date & time. Has anyone faced this problem. Thanks in Advance Chetan