HT4241 What video settings will I need to change on my mid-2009 Macbook Pro?

I am trying to send Audio/Video to my mother's T.V. using a third party combo cable(item # 6331), from monoprice.com. We have a 'Mid-2009 Macbook Pro. I can get the Audio with no problems. I tried all of the different resolutions on the Macbook and the closese Video image I can fet is a vertical sliver in the upper left hand corner of the T.V.(52'' Sony Bravia Model # unknown, mounted on wall) Please help. Mothers Day is coming up an All My Childeren is coming back, but will be on Hulu. Thank You

The tech specs list the upgrades that were available from Apple when that model was being sold new. They don't necessarily reflect the aftermarket-upgradabaility. I don't believe there'd be any reason you couldn't put a hard drive/SSD of whatever capacity you want in that MBP (of course it needs to be the right physical size).
That being said, it's good practice to make sure you have a window to return it just in case.
Yeah what Bob said.
Message was edited by: Andy-J-D

Similar Messages

What display settings do i need to change to use hdmi cable with macbook pro

what display settings do i need to change to what tv and display my macbook pro with hdmi cable connected to computer.

Well, if it's 1080p TV, then go into System Preferences > Displays.
Sometimes you have to click on detect displays & a PreferencePane should appear on each display device for you to change the resolution.
Also decide if you want it mirrored, or extended. And also move the display to the correct position for extended so you are moving the mouse in the direction of the 2nd display being the TV.
Option + F1 = Brings Display preferences up immediately.
Command + F1 or F2 = from memory that's the shortcut to switch back & forth between mirroring & extended.

I am having problems rebooting my mid 2009 macbook pro (grey screen other issues), need help!

I am having problems rebooting, I have experienced the same problem as others with the grey screen but my case is a little different, It started with my mid 2009 macbook pro acting a little slower than normal, the screen would freeze, mouse wouldnt move and i'd be forced to "force reboot" this went on for a couple of days until i was tinkering with the wifi connection and it froze again. I had to reboot and this time i noticed that it took a long time to get to the login screen. i put in my password and it went into infinite load (i also tried the guest account and other accounts with same result). i tried rebooting again and the same thing would happen. after several reboots, the screen just stayed grey, sometimes with the apple logo and gear sometimes without it. Since its a 2009, (and for the most part, still works like a champ) i decided test the ram, i took one stick of ram out at a time to see if i could notice anything wrong with them. when i stuck just one in, the mac was still having the same problem rebooting. i pulled that ram and and stuck in the other and i noticed that this time the apple logo never appeard and a big crossed out circle appeared. figuring that the ram must be the problem, i ordered new ram and installed it. i noticed that when i rebooted for the first time with the new ram it was rather quick and took me straight to the login screen and i was able to log in with no problem. at this point i thought the problem was solved, but i noticed the macbook still acting funny. at first, none of my files appeared on my desktop or in the finder window. after about 20 minutes, everything magically popped up. i also noticed long pauses/freezes with the colored pin wheel spinnig. i closed the laptop and opened it again and the screen just stayed black. i tried rebooting again, and again i got the grey screen with no signs of being able to log in... i waited about 20 minutes and tried to reboot again and again i was able to log in, however the macbook is still acting slow and will freeze with no signs of unfreezing without a reboot.
my macbook is 5 years old and has plenty of miles on it, so i understand if the thing needs to be replaced alltogether but does anyone know what could be the issue? could the bad ram have corrupted the hard drive in anyway? would re-installing the OS fix it?? and if so, how would i do that if i downloaded mavericks from the app store? are there any other solutions to this problem?
all my files and what not are backed up on an external HD so theres nothing on it that i'd miss desperately if i had to whipe the hard drive but id really like to get her working again without any whiping of the HD. if anyone can help me out, it'd be greatly appreciated

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

My Mid 2009 Macbook pro (Just purchased) will not turn on after hard drive change and ram upgrade

So i purchased a mid 2009 Macbook Pro from a guy with 4 gb of ram and 250gb hard drive. It worked perfectly fine when i booted it with his hard drive and ram installed.
I spilled beer in my old computer (late 2009 15" 500gb hard drive and 8gb ram) but took the hard drive to get tested and it worked fine. i later found out it was from a 2010.
Like an idiot i assumed the pro i just purchased would be able to handle the same upgrades that were in my old computer so i threw in the 500gb hard drive (2010) and the 8gb of ram.
The thing booted up fine, just a bit slow which i chalked up to my hard drive sitting unplugged for a long time.
After about 3 minutes it crashed on me. Confused i replaced the 4gb of original ram back into it. (the 8gb ram was pny i bought from ebay so i thought it could be that) It decided not to turn on or show any lights on the front except for the battery meter.
After this i replaced the original hard drive and still NO LUCK!! im really mad because i am in desperate need of the information on my original 500gb hard drive and im afraid i have destroyed 2 computers and about $1K worth of cash out the window.
HELP please enlighten me on what i have done and if the situation can be fixed.

UPDATE: Problem solved with the old hard drive in it, Now the less pressing issue:
Will the computer run my 500gb hard drive with all my information on it? I need to forward a resume and it is on that hard drive.

I have Mac OS X 10.5.8 on mid-2009 Macbook Pro (683MB RAM used, 81.67GB free space), do I need additional RAM to update to Snow Leopard?

I have Mac OS X 10.5.8 on mid-2009 Macbook Pro (683MB RAM used, 81.67GB free space), do I need additional RAM to update to Snow Leopard?
I was told I can update to Snow Leopard without adding RAM but just read on another discussion thread that someone with the same age Macbook Pro that I have was told to purchase more RAM then update to SL.
Serial # W8*******6D
Model Identifier: MacBookPro 5,5

Thanks!
I ordered 4 GB from crucial.com, product info below. Do you know if it will be 1 or 2 sticks? If only 1, will I be able to use the original 2 GB installed in the machine and the 4 GB from crucial.com?
Part Number: CT4G3S1067M
Module Size: 4GB
Package: 204-pin SODIMM
Feature: DDR3 PC3-8500
Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64 • lead free • halogen free • for Mac

Mid-2009 MacBook Pro sees internal SATA hard drive, but will not boot from or format

I inherited a Mid-2009 MacBook Pro (15-inch, 2.53 GHz model) with a very strange issue.
It first presented itself as not being able to boot from the internal SATA hard drive that came with the computer. Nothing I tried could get it to boot, so I assumed the file system was corrupted beyond repair and booted from a CD to try to format the drive. Disk Utility on the CD would not format the drive, giving me strange error messages like "Unable to write to the last block of the device".
At this point I figured the drive itself must be toast, so I pulled it out and put another known-good SATA hard drive in, booted from CD, and attempted to format. Again, same error messages and an unsuccesful format.
So I had the bright idea of formatting one of the drives in an external enclosure and then putting it in the MBP to see if OS X would even install. No dice. Get a cryptic error message before installation even begins.
So I installed OS X on the drive in the external enclosure and put it in the MBP, and it attempts to boot, but never goes anywhere.
So to sum up, the symptoms I'm seeing:
MacBook Pro CAN see internal SATA hard drives.
MacBook Pro WILL NOT boot from any internal SATA hard drive and cannot format or install OS X to any internal SATA hard drive.
MacBook Pro WILL boot from any CD or external device and seems to work properly otherwise.
At this point I'm thinking it's one of two things: the hard drive ribbon cable or the SATA controller on the logic board.
Since the MacBook Pro seems to work completely fine other than this one issue, and will boot properly from both external devices and the CD (also a SATA device), I'm thinking and hoping that it's just the hard drive ribbon cable. From my searches online, I've heard that this batch of MacBook Pros is known to have issues with the hard drive ribbon cable, but it seems in most cases this manifests itself by the Mac not being able to see a drive at all.
I've done quite a bit of troubleshooting to get to this point, but right now I'm just looking for any feedback at all. Specifically I'd love to know a way I can easily test to see whether it's the logic board or the cable.

UPDATE: An interesting development!
I just tried a third known-good SATA hard drive, one which I believe supports SATA I only (but I'm not sure), and unlike the other drives that the Mac sees but cannot properly interact with, the Mac can't even see this one when I put it inside.
Frustrating as this may be, I believe I'm actually getting closer to a solution since my symptoms now appear to be closely aligned with people having SATA ribbon cable issues.
Onward!

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

Network times out on my Windows 7 Lenovo when trying to load IOS 5 on my iPad 2 what network settings do I need to change?

When I try to upgrade my iPad 2 to IOS. 5 on my Lenovo PC it says the connection had timed out. I have disconnected the firewall and check the connection through the troubleshooting guide on the PC. Can someone tell me what network settings I need to change to make this work? Also iTunes is also up to date on this PC. If I cannot get this to work is there another way I can do a direct update to my iPad? Thanks so much

Try temporarily turning off all your firewall and antivirus software until the download has completed.
An alternative is to try downloading the update via a browser : https://discussions.apple.com/message/16703914#16703914

I have a Mid 2009 Macbook Pro 13 with no restore disk; it has OS 10.8.4 I believe there is something wrong with the OS due to I can not install flash player to view Youtube videos and the when we plug in a Bose headset the sound out will work sometimes

I bough a used Macbook Pro mid 2009 that came with OS 10.8.9 it didn't have a backup restore disk with S/N W8******66D
When trying to view some youtube videos; a window would pop up saying "it needs adobe flash player is required for video play back get the latest flash player" but after downloading the file and during installation would have errors and will not installed.....tried to reboot and install again.....but still the same.
The othe thing I had noticed is when using a good Bose headset with mic the sound output would noticed the headset and then switch from headset to Internal speekers and headset.....thinking that there might be something wrong with the plug in port of the computer or the headset.....the headset works with no issues on my iPad so there must be something wrong with the computer.....tried to move the plugin around the port but no change....while the headset is plug in can hear a short clicking noise and the sound would get lost and back again......but with nothing plugin to the port there is no issue with the sound or mic.
Thanks for your feed back......it looks like I have two different issues one is a software issue and the outher is a hardware issue
<Edited By Host>

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

Will I need to put more memory on my MacBook Pro for Mavericks?

I got my MacBook Pro in Februrary 2013 (so I think it's a mid 2012 model? Not sure). The memory for it is 4gb and 1600mhz. It came with OS 10.8, but I am now upgrading to Mavericks. My question... will I need to get more memory to fit Mavericks onto my computer? Or will what I have suffice? I don't have much stuff on my computer; I backed everything up before beginning the process (should be done in a few hours, and I can always pause it if necessary). The backup flashdrive holds 8gb and I'd say, in total, I have about 4.5gb worth of stuff (word documents, pictures, and videos) on my computer. How will that affect what Mavericks takes up (Mavericks says it needs 5.32gb of space)?

venom --
With all due respect, I find it hard to believe you ever worked at Apple.
You can't spell. And you believe that Mavericks only needs 1 GB to install. Totally incorrect.
I can easily upgrade my computer with more memory, too, after all is said and done.
Do that, you'll love it.
Babowa & KOT: Right on.

Mid-2009 Macbook Pro will not turn on

Hi Folks,
so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
Thanks for any help. I really appreciate it.
Ken

Ken,
the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

Need an SSD for a mid 2010 MacBook Pro...

My HDD suddenly died on me! No warning. It's still spinning away, clicking away but totally dead. Not even showing up on any disk repair recovery programs, ***?.
Anyhoo, I need a new HDD and have decided to go with an SSD.
I have a mid 2010 15" 2.66 i7 MacBook Pro, and am wondering what SSD spec I need to be looking for.
I'm pretty sure that the new drive would need to be SATA II. Anything more would be over kill.
Other than this, any other considerations regarding compatability that I need to be aware of?
Thanks guys, for any pointers offered.

It depends on how much you're willing to spend. A ~250GB SSD will cost you around $400-500, depending on the make and type (SATA I vs SATA II). My minimum recommendation for any boot drive size is in the 80-120GB range (leaning toward the higher end of that), and these will cost between $100-$200 for an SSD. SATA II SSDs will be more expensive than SATA I versions, but the performance of the SATA I SSD will be well above the performance of an SATA II mechanical HDD.
These days, if you're up for it my recommendation is a ~120GB SSD replacement for the optical drive (there are several companies that sell brackets for holding 2.5-inch drives in the optical drive bay), which will allow you to use the SSD as a boot drive and the existing HDD as a storage drive. It's great on battery life and offers exceptional performance for the money.

Will this hard drive work in my mid 2010 macbook pro 13" ?

Macbook pro 13" Mid 2010
2.4 GHz Intel Core 2 Duo
8GB 1067 MHz DDR3
Need to upgrade my 250GB harddrive to 1TB, do you know if this one will fit ?
http://www.amazon.com/WD-Blue-Mobile-Hard-Drive/dp/B005DVJJWQ/ref=cm_cr_pr_produ ct_top
WD Blue 1 TB Mobile Hard Drive: 2.5 Inch, 5400 RPM, SATA II, 8 MB Cache
Product Dimensions: 3.9 x 2.8 x 0.4 inches
Any help is much appreciated! Thanks guys n' gals!
(also I am going to want to format it for mountain lion, should I just get the DVD from the store to make it easier?)

Do you have a Snow Leopard DVD? If so then you can use it to prep the drive. You are going to need an external enclosure in order to get everything done:
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

HT4718 If I Restore My Mid-2009 MacBook Pro using Recovery Utility, will iLife be installed?

I'm selling my MacBook Pro and I'm going to use Recovery Utility to restore it. It is running OS X Mountain Lion. After I re-install OS X will iLife be on the machine? The person I'm selling it to needed that on there.

If your Mac came with DVDs, you have to use them to install the default OS X that came with the Mac. Mountain Lion is registered to your Apple ID and the owner won't be able to reinstall it if you give the computer with Mountain Lion.
After you erase the hard disk and install OS X, iLife won't be installed, so the owner has to use the Applications disc that came with the computer to install iLife. Finally, open  > Software Update to install the most recent version

Will I need an electrical converter to use my macbook pro in Japan?

I need to know if I need to purchase a special converter to use to charge my new laptop while traveling in Japan.

i lived in japan for years and i go to visit all the time. where i have been the plug itself is the same size, only the frequency was different 50hz v. our 60 hz. not sure how that affects the computer, i know it affects an american clock. i used my stereo equipment fine. never used an american computer over there.

HT4241 What video settings will I need to change on my mid-2009 Macbook Pro?

Similar Messages

Maybe you are looking for