HT4245 facetime audio cuts every time I call my daughter?

OUr daughter is in the countryside south of Paris. We have been using facetime with her. Every time we call her—it works great for about three minutes and then she can no longer hear us. Every time this happens. Only work around we have found is running two computers at once, once calls her on skype, and the other on face time.The pix works better on facetime.

Why Am I Being Asked for a Voicemail Password?
If you don't remember setting a voicemail password or can't remember what it is, contact your carrier (i.e. AT&T, Verizon, Sprint) for assistance. To manage your password, go to the Keypad.
Press and HOLD the 1 key for a few seconds. This initiates a call to voicemail.
Once the female voice says "Main Menu," press 4 for "Personal Options."
Press 2 for "Administrative options."
Press 1 for "Password Options."
To change password, press 1
To turn password on/off, press 2
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios#ios7_phone

Similar Messages

  • Every time I call through face time on my I pad2, it rings and it says connecting and after that it closes and won't connect

    Every time I call through face time on my I pad2, it rings and it says connecting and after that it closes and won't connect.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Unable to make or receive FaceTime calls after April 16, 2014
    http://support.apple.com/kb/TS5419
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • I have an iphone 4s, and every time I call, I got error call.I tried putting the sim in another phone but it works well. What can I do?

    I have an iphone 4s, and every time I call, I got error call.I tried putting the sim in another phone but it works well. What can I do?

    I have an iphone 4s, and every time I call, I got error call.I tried putting the sim in another phone but it works well. What can I do?

  • I have really slow internet, i bought OS X mountain lion & tried for days to download it. my internet cuts every time & the download restarts from the beginning is thr a way to download the software as a "zip" file or from a link not app store?

    I have really slow internet, i bought OS X mountain lion & tried for days to download it. my internet cuts every time & the download restarts from the beginning is thr a way to download the software as a "zip" file or from a link not app store?

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
    http://www.apple.com/support/macbookpro
     Take it somewhere that has better broadband. The best you can do sometimes is invest in new modem that works with your system instead of the rental etc in most cases.
    Do a Safe Boot.
    Make sure your firewall is set properly. Don't use 3rd party. AV software can get in the way.
    Make sure you are getting the service and a clean strong modem signal - slow is one thing but if it drops off and can't maintain a connection you have hardware issues, not software - and upgrade to a new OS doesn't tend to improve, it may even not work with older networking equipment once you do get it.
     I agree and think electronic only goes too far. And when you do get it: burn the package and manually set it aside first before running the intaller! make a flash memory installer, put it on DVDs too.

  • Why does my facetime audio cut out?

    When I am facetiming with mac laptops running snow leapord after a period of time, the audio cuts out.
    What causes this and how to prevent it? It is very annoying.
    They can hear me but the audio from them is mute.

    If the iPod plays fine after you start the car, then most likely its fine and normal. If it doesn't, try contacting your dealer.

  • Every time I call Apple Support, their reply goes straight to voicemail. This is proving extremely irritating, as I need to change my security questions. Help

    As the earlier message said, I've been trying to reset my security questions. Should be easy, but every time I've called Apple support, their call goes straight to voicemail, saying I appeared to have missed them. No idea why it's doing this, and I kind of have to call from a cell, don't have a home phone. Any online alternatives? Any help would be greatly appreciated.

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • HT4245 facetime for mac I can hear caller but my mike is locked on mute and grayed out

    facetime for mac I can hear caller but my mike is locked on mute and grayed out.  I am on mountain lion 10.8

    Double-click the Home button to display recently used apps.
    Flick from left to right along the bottom of the screen.
    Tap the Mute button on the bottom left of the screen.
    A slash will appear across the Mute button:

  • Final Cut: My rendered audio disappears every time

    Hi all,
    I render audio (an imported music track), then video and music are okay. However, when I save everything and continue work later, the audio has to be rendered again, each time. What can I do? I suspect a problem with recording or saving paths.
    Thanks, Paul from Toulouse, France

    casteraman wrote:
    I seem to get it working - all the file formats work. I fiddled with the systems- and preference settings and cannot trace what the helpful change was. E.g. I set the audio quality to high (was low), but this should normally not influence the rendering path...Thanks anyway! Paul
    When you set the audio to high it will force the system to render anything it cannot in the low  setting.
    I suspect FCE was converting the odd files on  the fly and not actually creating render files.
    I like to edit in low and switch to high just prior to exporting or whatever. The switch to high will show up any audio problems.
    Look for the colour of the render bars in the audio tracks, that will tell it all
    Al

  • Facetime audio cuts out on iPhone 4S and iPad2 after iOS6 update

    I've used Facetime on my iPad2 and iPhones for years.  I updated to iOS6 and now I have the incoming audio drop out, especially when the other person starts to talk after a delay.  Are there new settings or something I need to do.  It really detracts from the generally good Facetime experiences I've had in the past.
    iPhone 4S and iPad2 w/iOS6

    I experience this problem as well. I have an iPhone 5 running on iOS6 and have a horrible time with audio on the other end cutting out when I receive it.

  • I dont want 6 audio tracks every time i import an file

    HI
    Whenever i export a file from soundtrack and import it to final cut it always creates six tracks, regardless of the file being a 2 track stereo file or an omf 6 mono tracks.
    Is there an option to just have it create the 2 tracks when that is the case
    Where is that option or what should i do so that i dont have to delete them every single time
    Thanks

    Are you muting the unwanted tracks in STPro?
    Have you tried posting this in the STPro forum?

  • Determining audio volume every time iTunes opens

    The library I maintain for my iPod is located and managed on my desktop computer. Any time I open the library remotely using my laptop, it goes through that "Determining Audio Volume" thing for about 1300 songs. I let it run its course last time, thinking it would be done with it for good. When I opened the library (using the laptop) this morning, it went through the same thing. Same number and same songs. This seems to slow the machine down, due to iTunes being a RAM hog.
    How do I get it to stop this?

    Hi,
    I hav exactly the same problem. Didn't find a solution yet. YOu? It started when I ticked 'use volume check' when buring a cd. I unchecked it, no result. I reinstalled iTunes, no effect.

  • Why is my iTunes insisting on 'determining audio volume' every time?

    I upgraded to iTunes 9 a few weeks back and seemingly from that point onwards my iTunes application wants to 'determine audio volume' on a great number of tracks as soon as the program is launched.
    The setting is unticked in Preferences on iTunes and on the iPod I synch with.
    I don't want it to be doing this, especially as I'm quite happy to manually change this level if I feel its required, but can find no way of preventing it, aside from clicking on the 'x' in the top window whenever it starts - which is becoming tiresome.
    I've tried deleting the cache file in Library > Caches and also starting up in Safe Mode and then opening again in normal mode but all to no avail.
    Help!!!

    Make sure you have also unticked sound check in the burn settings dialog you get when you burn a playlist to disc.

  • Why do I have to re-sync audio files every time I republish?

    after I update my presentation and republish it, the audio links are broken. The only way I know how to fix it is to go slide-by-slide and add the audio back in. Is there a way to re-publish without losing audio?

    Well, I was charging it and playing some music. I looked down, and the screen was bright White....I could not shut it off. I unplugged it and held down the buttons, it turned off and never turned back on again.
    It was extremely hot. Not enough to burn you, but sorta like a cup of coffee hot.
    They were not sure what happened, but i got a new (not refurbished) touch.
    Wish I could figure out this registration thing though.

  • InDesign server crashes every time when calling deleteEmptyPages in script

    We are evaluting InDesign Server CS6 on a Windows server environment. We have an idml file, sample xml file that is tagged to specific frames inside the idml file and a script file for execution on the server. This script opens the idml file using the app.open api, imports the xml file and export the ID file to a PDF. Because we have table content with variable row count, we are using the smart text reflow functionality. Setting the text preferences with smart text reflow appears to be working but we also want to delete the empty second page when the content is less than a page. So, we also tried using the deleteEmptyPages property document's textPreferences. When this is set to true and the script is executed on the ID server using the sampleclient, the server crashes with the following message. When I do the same thing in the InDesign UI using the preferences options, it works as expected.
    The script looks like below - is this the right way to do it?
    var myInddFile = app.scriptArgs.get("idfile"); //"X:/IDFiles/AutoFlow.indd";
    var myXmlFile = app.scriptArgs.get("xmlfile"); //"X:/IDFiles/deleteme.xml";
    var myOutputOptions = "[Smallest File Size]";
    var myPDFPreset = app.pdfExportPresets.itemByName(myOutputOptions);
    var myDoc = app.open (File(myInddFile), OpenOptions.OPEN_COPY);
    myDoc.xmlImportPreferences.ignoreWhitespace = true;
    myDoc.textPreferences.smartTextReflow = true;
    //myDoc.textPreferences.addPages = AddPageOptions.END_OF_STORY;
    //myDoc.textPreferences.limitToMasterTextFrames = true;
    myDoc.importXML (File(myXmlFile));
    //uncommenting this line causes the ID server to crash
    //myDoc.textPreferences.deleteEmptyPages = true;
    var myOutputFile = app.scriptArgs.get("outputfile");//File("X:/IDFiles/sampleX.pdf")
    myDoc.exportFile (ExportFormat.PDF_TYPE,myOutputFile, myPDFPreset)

    Thanks Harbs. We are looking at full automation and so removing the pages manually is not an option. But I did find a script at InTools http://in-tools.com/article/scripts-blog/script-of-the-day-jan-24-2010/ that helps with automating the removal of empty pages. This script appears to be a nice workaround for server side usage. I used it on my document with multiple column text frames and it is removing the empty page as expected. If there is a better way to do this, let me know. Thanks.

  • Every time a call ends or I miss a call my podcasts start playing. I realize this is because the app is only paused and not stopped; however this is a problem I didn't have before the podcast app when it was just integrated into the music app.

    It also does this after I use Siri. I have an iphone 5 and it does the same thing on my 3gs. Since I forget to stop the app frequently it becomes annoying to have podcasts starting at random when in a meeting.
    Thanks for any help!

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

Maybe you are looking for

  • Itouch 1sg won't sync music or photos

    So ever since I got the update of 3.1.2, my ipod starting reacting towards it and won't syn my music or photos. STating that my itouch is timed out or "photo folder can't be found" I already uninstalled everything about 3 times, rebooted the computer

  • Interactive Report accumulates Filters

    Hi all I have a menu of links, each of them sends you to the same Interactive Report with a certain Filter. All of them are like this: :IR_REPORT_30627346:RIR::IRLIKE_MODULES:%25Order%20Management%25 But each of them get stuck with the other ones, ac

  • Neither Sync Manager works with my Mi

    My Zen Micro is running firmware 2.2.02_0.00.65. Since I updated to the MTP firmware, the standard Sync Manager does not work. As you can see in the pic below, my Micro is not even listed as a possible device. All I get on both options are My Comp an

  • Help! How to convert an instance from java.lang.Object to a particula class

    * How to convert an instance from java.lang.Object class to a particular class witch is known only at the running time? Roster EJB component is make up of RosterHome, Roster and RosterBean. RosterHome is the home interface of Roster EJB. Roster is th

  • Getting data into a standard eBS form from a custom form

    To automatically enter (existing) customer information into a standard eBS form, we've created a custom query forms. This form queries for a customer and places the customer information into some global variables. This works fine. Now, this query for