HT4245 my imessage doesn't work on my ipod touch. i touch it to open and it immediately closes....help please to resolve it. it would be nice to use if it would work.

ipod touch with iOS 6.0.1i've done everything the support site says. even reactivated it and still the same thing....nothing...like i said, it would be nice to use it if i could but now im just getting really fed up with this if i have something permanently on there that i can't use. help would be very much appreciated for me.

This is the iPad forum. You might have better on the iPod touch forum.

Similar Messages

  • My iMessage doesn't work, and I keep getting a message saying I've lost Internet connection(when really my wifi is just fine) and it won't sign me in. Help?

    My iMessage doesn't work, and I keep getting a message saying I've lost Internet connection(when really my wifi is just fine) and it won't sign me in. Help?

    Thank you soo much ! Every now and then I would check my DNS and it would say 8.8.8.8 but I just checked now and realised it was somethin something something THANK YUU SOO MUCH ! REALLY APPRECIATE IT AND YU DESERVE THOSE  49,085 points !!!

  • HT3529 iMessage doesn't work on my iPad 3.

    I've had my Ipad 3 for 6 months and the iMessage worked at one time - from what I can figure from everyone elses posts since the upgrade to OS 6.0.1 iMessage doesn't work with this software upgrade. 
    Strange Apple would let this slide for so long.  I have done all the resets, shutdowns, on/off of imessgea and facetime, change dns to 8.8.8.8 - and all the other 50 suggestions out there on the internet.  Still nothing.  Quite discouraging for an Apple device.  I would expect such a problem for a non-Apple tablet...
    Has anyone found a solution?
    Is there a way to go back to version 5?
    Thank you.

    Try resetting your ipad,
    Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad  will then go through a reset / reboot procedure and will be ready for use within about a minute.
    Don't worry about doing this as you will not lose data
    Also check,
    Settings > Messages > iMessage > On
    Good luck and do report back

  • IMessage doesn't work all the time

    Hi,
    I'm using iPhone4S and noticed that recently for the past week, iMessage doesn't work when I text my husband who's using iPhone4.
    I tried switchin network (wifi and telco data) but both also doesn't work. Please advise why this is the case and how to fix it.
    SMS international is costly.
    Thanks.

    Ask him to enable his email address to receive iMessages and do the same on yours. It's in Settings > Messages.

  • Help! My iMessage doesn't work on my new iPhone 5s, I've changed my sim twice, but iMessage only works with my Apple ID.

    Recently got a new iPhone 5s and the iMessage doesn't work. I tried the sim in another phone and it didn't work either so I put a completely new sim in my iPhone and iMessage doesn't work. It will only work when I use my Apple ID for received messages. I don't know what to do. I have reset everything and it still doesn't work. My software is up to date. Please help!

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

    Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

    1. Did you use Bootcamp Assistant?
    2. Did you build a USB with Windows 7 ISO and Bootcamp drivers?
    3. You should use a USB2.0 disk, not a USB3.0 disk (flash drive).
    4. What year is the Retina MBP?

  • After upgrading to iOS 7.0 my iMessage doesn't work and it says it is "waiting for authorization". When I try to activate it, it won't connect.

    I upgraded to iOS 7.0 and now my iMessage doesn't work. My phone reads "waiting for activation" When I try signing in I get a message "Could not sign in. Please check your network connections and try again". My network connection is fine for all other applications. Any help?

    Hello Remundy,
    Thank you for the details of the issue you are experiencing with iMessage.  I recommend reviewing the following article:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IMessages doesn't work for me since 1 hour, what happen?

    iMessages doesn't work for me since 1 hour, what happen?
    I can't write 'iSMS" to anybody, but whatsapp, viber ect work as it should

    Same thing here. Any word? I've made an appointment but REALLY don't want to go all the way in.

  • IMessage doesn't work after changing the sim. New number isn't even recognised.

    I changed my sim from a German to a French one and the card is already active and calls are possible, but iMessage doesn't work. The new number is not recognised and iMessage cannot be activated.
    I tried to switch it off and and and I reset the network, but nothing. I even removed the card a few times, but no change.
    How can I make it work?

    Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
    On my SD TV... Notice the black bars on the top and bottom.  Once I go in and out of the guide the black bars are gone.  I have reported this but if you are confirming the issue I will report it again. 
    jaytee1019 wrote:
     I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
    It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

  • Updated toi IOs5.1, and now imessage doesn´t work.

    i have updated toi IOs5.1, and now imessage doesn´t work.
    what can i do??
    al actualizar el software a 5.1 no funciona imessage.
    como lo soluciono?

    I am having this issue too.  After doing all of the suggested ideas I found online, I am still stuck in "waiting for activiation" mode.  I live out of the country, and my cell phone is not connected to my carrier's network for the next month (so I really have a glorified ipod touch).
    If anyone finds a fix, please pass this info along.
    I have already tried:
    resetting network settings
    log in and out of iMessage/ Facetime
    log in and out of iCloud
    log in and out of iTunes on my phone
    full restore mode on iTunes on my computer
    HELP!!!!!!!

  • Imessage doesn't work after the installation of the update 6.0

    imessage doesn't work after the installation of the update 6.0

    iMessage will not work until it's activated.
    Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.
    Switch iMessage back ON.

  • IMessage doesn't work after the installation of the update 5.1

    iMessage doesn't work after the installation of the update 5.1

    I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
    I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
    I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
    Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
    Thanks
    Jo

  • TS4268 My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

    My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

    Look at no. 5 in this text which was copied from Apple's support site for troubleshooting Messages and FaceTime activation.
    Troubleshooting Apple ID activation
    After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
    Update to the latest version of iOS.
    Ensure that you have an active Internet connection. You can complete activation using Wi-Fi or a cellular data connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
    If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
    Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
    In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
    Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location.
    This is the support kb article.
    http://support.apple.com/kb/ts4268

  • My push notifications don't work in my iPhone 4, iMessage doesn't work too, what can I do?

    I have this iPhone, the push notifications don't work, iMessage doesn't work, I need help, I need to stay in the apps to receive messages for example what's app, Im+ pro, tango, viber, games, etc. the had jailbreak and I upgrade the iPhone to iOS 6.1.3, but the notifications don't work I need help please

    Error404 name not found wrote:
    I have this iPhone, the push notifications don't work, iMessage doesn't work, I need help, I need to stay in the apps to receive messages for example what's app, Im+ pro, tango, viber, games, etc. the had jailbreak and I upgrade the iPhone to iOS 6.1.3, but the notifications don't work I need help please
    There is your problem, and the discussion of jailbroken devices is not allowed on the forum.

  • TS4268 iMessage doesn't work anymore suddenly. It claims that my apple id had changed, which isn't the case (App Download still working!) . Then it shows the correct Email-adress and asks for appleID password.

    iMessage doesn't work anymore suddenly. It claims that my apple id had changed, which isn't the case (App Download still working!) . Then it shows the correct Email-adress and asks for appleID password. After entering it switches to a mask witch asks for the eMail adress that should be used. There is the right One already preentered. From there it switches back to the former mask (appleID +password) and nothing happens. If you say Log in again, ist just switches between those masks without showing an error claim nor logging in. Strange thing is ist worked proppperply till a few days ago.......

    Hello there Noregret35,
    I suggest this part of the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/#section_1
    If you get to step 3 I recommend closing ALL the apps.
    Here is step 1 to get you started.
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    Regards,
    Sterling

Maybe you are looking for

  • I have an MacBook Air, which keys do i use to connect it to a projector

    Which keys do I use to connect my MacBook to a projector

  • Working with Lo-Res Clips

    I know you can capture footage lo-res so speed things, then recapture at full res later. Question I have is, many times I take a project with me to work on it at home. This requires the use of the beast-Media Manager. This of course require huge amou

  • Need new Connect development info

    For Connect/Breeze 5 and 6, our company had been granted access to the "Breeze Telephony Adapter Reference" and the "Telephony Adapter API". We used this to integrate our own teleconferencing product into a Connect licensed server. When I try calling

  • XML and MIDP

    Are there any easy to understand tutorials that just show how you connect to a server through Http, query the database and generate an XML file so that MIDP displays it ?? I already have the database connection stuff working and http it's just that i

  • Error occuring when opening file programatically?

    I am trying to create a directory(ok) and then create a file from information obtained from a program(error). In this example i am calling the directory C:\TESTDATA\`serialnumber`\`type of test` and the file called `date``operator`.xls However once t