HT4259 Airport Express Ethernet port used for home entertainment?

I use my Airport Express to extend my network with my 2TB TimeCapsule base station. The Airport Express has one ethernet port. Can I buy some other device with say 3 or 4 ethernet ports and plug it into the one ethernet port on the AP Express to connect all my home entertainment devices? What should I buy if this can work?

As long as you are talking about the N version of the Express.. what is often called Gen1.. then any switch will do the job. The express is only 100mbit.
The cost of network switch is $20-40 depending on the number of ports and if it is older 10/100 or gigabit.. IMHO buy 8 port gigabit.. any brand you want,, they are much the same.. metal case ones are nicer than plastic.. but they are cheap consumer item in any computer store.
If you buy what I suggest, it will be useful well into the future.. the slower 5 port is cheaper but the usefulness of it into the future is questionable..

Similar Messages

  • Is Airport Express ethernet port suitable for a laser printer

    I saw there are three ports out from the device, one is an ethernet port and I wonder if I can use that port to connect a laser printer with a network card built-in. This is because I have two printers one is a USB and the other is parallel/neetworkk one and would like to connect both to the Airport for remote use purposes.
    Thanks & Regards,
    Dante

    Unfortunately, the AirPort Express Setup Guide is not very clear about the uses of the Ethernet port.
    There is a special feature on the AirPort Express called ProxySTA that will allow the Ethernet port to be enabled when the Express "joins" a wireless network. This feature must be enabled using the Manual Setup option when the Express is configured using the AirPort Utility application.
    The setting is found when you click the Wireless tab (just below the icons). Enter a check mark next to "Allow Ethernet Clients" and this will activate the Ethernet port, which will function as a remote LAN port.

  • HT204371 airport express Ethernet port isn't working

    why isn't my airport express ethernet port not working????

    We will need more information than this.
    What generation of Express is it? What OS are you using? Have you tried with multiple cables?

  • In time capsule, can ethernet ports used for windows pc as a LAN?

    in time capsule, can ethernet ports used for windows pc as a LAN?

    i am connecting my windows pc to the time capsule ethernet prots but those pcs are not shown in my macbook or those windows pc also can not see my macbook pro. i am facing the problem...

  • Airport Express Ethernet Port for XBOX

    Please could somebody help me!!!
    I have the new Airport Extreme in my home office running an 80211n network. It is also connected by one of its ethernet ports to my first airport express providing my home with an 80211g network for our older powerbooks.
    I have a second Airport Express in my living room which is plugged into my Sony Receiver for use with airtunes.
    Question - we have just got an XBOX. It is located in the living room next to the second Airport Express. I want to plug the xbox into the LAN port on the airport express so that the XBOX can access the internet. Please could somebody explain how I do this. (I do not have the wireless adapter for the XBOX).
    Many thanks!

    Thanks for the help. I followed your directions and the info in the linked page. Everything appeared to configure correctly. However, the xbox still does not get a connection. The xbox is connected to the 2nd AX using an ethernet cable. Am I meant to somehow tell this AX to allow its single WAN port to act as a LAN port? Or is this meant to be automatic? Also, do I need to set this AX to distribute IPs... or will the 1st AX do that? In other words how does the xbox get an IP. Any other ideas???
    I am really grateful for any help you can offer...

  • Airport Express ethernet port for printing?

    I've recently purchased an Extreme (802.11n) for my wireless internet service which is working just fine on its own. In the other room I've set up my older Airport Express for only networking my printers. I don't want to hook up the printer to the ethernet ports on the Extreme as it is near my TV and entertainment center. I understand I cannot use a USB hub to connect two printers to the Express, but is it possible to use the Ethernet port on the Express for my Lexmark E240 or any other ethernet ready laser printer?
    Thanks
    Al Powerbook, MacBook   Mac OS X (10.4.10)  

    Hello Jeff Crowell...Welcome to the Apple Discussions!
    I understand I cannot use a USB hub to connect two printers to the Express, but is it possible to use the Ethernet port on the Express for my Lexmark E240 or any other ethernet ready laser printer?
    To activate the Ethernet port on the AirPort Express Base Station (AX), you need to configure it as a Remote Base Station in a Wireless Distribution System (WDS)...
    Wireless Distribution System (WDS) - Remote Base Station Setup
    (Note: To facilitate setting up the Base Station(s), place them in near proximity of each other during the set up phase.)
    Either connect to the AX's wireless network or temporarily connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility (in Manual Mode) to make the following settings:
    AirPort - Wireless tab
    - Wireless Mode: Participate in a WDS network
    - Network Name: <existing AirPort Network Name>
    - Radio Mode: 802.11b/g compatible
    - Channel: 1
    - Wireless Security: None
    AirPort - WDS tab
    - WDS Mode: WDS remote
    - Allow wireless clients (enabled)
    - WDS Main: <MAC address of the Main Base Station>
    Internet - Internet Connection tab
    - Connect Using: AirPort (WDS)
    - Configure IPv4: Using DHCP
    - Ethernet WAN Port: Automatic (Default)
    - Connection Sharing: Off (Bridge Mode)

  • Airport Express ethernet port question

    I have an airport extreme base station already, but it struggles to reach my home office from the living room (where the cable connection comes into the house).
    Also, my wife's PC doesn't do 802.11n, so I have to run the wireless network in backwards-compatibility mode.
    If I buy an Airport Express to extend the network, can I plug my wife's PC into the ethernet socket, or is that port only for WAN connections?

    If I buy an Airport Express to extend the network, can I plug my wife's PC into the ethernet socket, or is that port only for WAN connections?
    Yes. If the AirPort Express Base Station (AX) is configured as either a relay/remote base station in a WDS with your Airport Extreme Base Station (AEBS), its Ethernet port will be enabled for network (& Internet) access.

  • My Airport Express ethernet port is not working

    I recently purchased a refurb Airport Express (latest version) to extend my home wifi.  Extending the network works fine.  I then tried to set it up as a wireless bridge to my new AV receiver but the receiver would not connect -- no IP address, nada zip.  I had changed the settings to join a wireless network and checked allow ethernet client, rebooted the express several times, even tried a hard reset.  I connected two laptops using a spare ethernet cable.  The won't connect either.  It keeps trying to connect, but it does not succeed.  Am i doing something wrong or does the refurb unit have a dead ethernet port.  I would appreciate any help you can provide.

    When extending the network, my wireless clients get an ip.  The Express is just acting as a pass through the router.  The laptop I am typing this on is getting its signal from Express.
    When I change the configuration to have the express function as a wireless bridge to my new AV receiver, nothing.  No IP, no connectivity of any kind.  I then tried in with this laptop (Win 7 HP) and my wife's MacBook Pro.  No connection.  It keeps trying, it goes through an identifying cycle but then says no cable connected.  I have tried different cables and still nothing.  Are there any other settings in the airport utility that I am supposed to change beside the wireless tab where I set it as join the network and allow ethernet clients.  I retyped the WPA2 password just in case.  I'm stumped and would appreciate any assistance.

  • Old Airport Express Ethernet Port Usage

    hi there
    i have an older airport express (Model No A1264) bought some years back, it has only 1 ethernet port on it instead of 2 on the current model.
    i understand the new model has 1 ethernet WAN port for modem, and the other LAN port for ethernet printer or computer.
    my question is, the ethernet port on my old airport express is both WAN and LAN? or is it just a WAN port?
    because i intend to get an airport extreme to hook up a optical fiber modem which will be located downstairs in my house.
    and use my old airport express on the 2nd storey to hook up my etherenet printer, but not sure whether that ethernet port will work? or do i need to purchase the new model?
    many thanks in advance

    It no longer works.
    Unplug the Express, let it rest a minute or two and plug it back it in.
    Try a different Ethernet cable.
    If still no luck, test the connection by temporarily connecting a laptop to the Ethernet port on the Express using an Ethernet cable that you know is working. Turn off the wirelss on lthe laptop for the "test" and see if you can get a good Internet connection that way.
    If you can, you know that the Ethernet port is working, and you will need to focus your troubleshooting on the printer.
    If you still cannot get a good connection during the "test", this indicates that the Ethernet port on the Express is no longer working, and the Express will likely need to be replaced.

  • Airport Express Ethernet port compatability

    I have my Tivo hardwired to my Airport Extreme in another room. I just bought an AppleTV, thinking I could use the Ethernet port to connect to the Tivo and then wirelessly connect everything back to the Airport Extreme with no cables.
    Apple didn't have any official answers except that it's not supported. Can I possibly use my now abandoned Airport Express as a way to put the Tivo's ethernet on the wireless network. I hate to buy more hardware.
    Any ideas?

    Hello John153. Welcome to the Apple Discussions!
    In order to enable the Ethernet port of the AirPort Express Base Station (AX), the AX needs to be configured as either a remote or relay base station in a Wireless Distribution System (WDS) with either your AirPort Extreme Base Station (AEBS) or the Time Capsule (TC).
    I'm afraid I don't quite understand what you are trying to do. I assume that the Tivo has a single Ethernet port and you have this connected directly to the AEBS which, in turn, is connected to the Internet ... correct?
    You cannot use either the TC or the AX as a wireless adapter for the Tivo. However, if you have the TC configured in a WDS with the AEBS, you could use one of the TC's available LAN ports for the Tivo.

  • Is the Airport express Ethernet port input only?

    I am thinking of the airport express to stream audio now that the iPad supports airplay, but am wondering if the ethernet port is useful. I think that the Airport can connect to my existing wifi, and I have the audio interface, so far so good! But I also have a gaming adapter that takes the wifi signal and outputs it through an ethernet cable to my DVR, I am wondering if I can redeploy the gaming adapter

    If you configure current model the AirPort Express to "join" a wireless network for AirTunes/AirPlay, you can also enable the ethernet port if you wish so an ethernet device can connect. If you need more than one ethernet port for devices, you can attach an ethernet switch to the Express.

  • Airport Express Ethernet Port in Client Mode Please

    Hi,
    I am writing here as I can find anywhere to post feedback on Airport Express. I would really like to see the Ethernet port work in client mode. I am sure not the only one (a search on the net tells me so). If someone from apple could explain why this is not possible, I would be interested so that this subject can be put to rest.
    Thanks.

    Simple reason - Apple's engineers made a design decision not to support it. Speculation as to the reasons for that decision are not permitted in these forums. Apple won't tell us here either, since their employees don't post to these forums on matters of this nature.
    As I suspect you are aware, the ethernet port is active when the Airport Express is configured as a remote base station in a wireless distribution system (WDS).

  • Airport Express Ethernet Port

    Ok, I have an Airport Extreme base station, and I was thinking of getting an Airport Express to extend the range of my wireless network. I have been reading on the Airport Express part of the Apple site and it says the Ethernet port can be used to connect to a DSL or Cable modem, or an existing network. I was wondering If I could use it as a way to connect my PS2 to the Internet?
    thanks,

    1. do a factory default reset of the Airport Express you want to use as the remote base station per:
    http://docs.info.apple.com/article.html?artnum=108044
    2. run the Airport Setup Assistant on one of your Airport card equipped Macs, and use its guidance to configure the second Airport Express as a new base station that "extends" the existing wireless network created by the Airport Express acting as your main base station.

  • Airport Express ethernet port turned off?

    I have an Airport Extremme base station successfully sending out a wireless network to Airport-card equipted Powerbooks- no problem. But I also have Mac tower which does not have an airport card and is too far away to reach by Ethernet cable.
    Before a recent move, I was able to get this computer on the wireless network by ethernet-cabling it directly an Airport Express (which was joined to the existing network).
    I can't find a combination that makes this work again. The ethernet port in the Express seems to be deactivated.

    Thanks very much. WDS was the missing factor. After trying several permutations of WDS settings and address distribution settings between the Airport Extreme and the Express, things started working.
    I've said it before: Apple-provided documentation and online articles are skimpy. I can only imagine they do this to give the appearance of simplicity, even when the issues are complex. I'd say: give the "easy set-up" instructions - but give us the "expert" guide as well!
    This function of having the Express serve as an Airport card replacement should provide solution for the owners of Macs without Airport card (like many buyers of recent G5 duals like myself who discovered too late that we could not install airport cards ourselves).

  • Airport Express Ethernet Port  Question  (Please);

    Hello,
    Senario: If using an Airport Express to extend the wireless internet capabilities in a given area ( Internet is provided wirelessly from a pimary Airport Base Station to this Airport Express). Is this airport express able to also share internet/networking abilities through its ethernet port? I hope this is not confusing. I would appreciate your insight and help. Thank you.
    PowerBook    

    Senario: If using an Airport Express to extend the
    wireless internet capabilities in a given area (
    Internet is provided wirelessly from a pimary Airport
    Base Station to this Airport Express). Is this
    airport express able to also share
    internet/networking abilities through its ethernet
    port?
    Yes.
    iFelix

Maybe you are looking for

  • How to delete images from folder which are not in the database

    I am created windows form i wont to delete images from the folder where i have stored images but i only want to delete those images which are not in the data base. i don't know how it is possible . i have written some code private void button1_Click(

  • I have a mainboard X48C freeze problem

    Hi I'm new to the forum, sorry to jump on the band wagon but I have the same problem which has only just started, since I bought a Q9550 (previously had a E660) and instead of starting a new post (can if you want) thought I would ask for some help he

  • PAR file missing in PAR selection list during iView creation

    Hi Gurus I created a jsp file and exported it through NWDS export option. But i dont get this par while iView creation. Its present when i searched in the support desk . Can anybody tell me the steps how to create a simple jsp in NWDS and test the sa

  • Is there an add-on to move the back/forward buttons to the right of the address bar (FireFox 34)?

    I know it might not sound like a big deal, but I can't stand having the back button to the left of the address bar. I always had it to the right of it, more toward the middle of my screen. I just can't get used to it all the way over there. I hate th

  • Silly question (I hope) re: Adjustment Brush in LR3

    For some strange reason, my Adjustment brush is not working for "Sharpening."  All of the other functions (i.e. Exposure, Clarity, etc.) seem to work just fine....only the sharpening is causing me headache.  Does anyone have a suggestion?  For the re