HT4259 Airport Utility 6.1 does note show "extend wireless network" option. How do I find the feature
I have an airport extreme and the utility is 6.1. I also have an airport express. I'd like to use the airport express to extend the WiFi. The "extend the wireless network" option does not show up in the Airport Utility 6.1. How do I go about finding that option? Is it something that doesn't need to be checked in Airport Utility 6.1?
I'm having the same issuse, the only work around I have found is by using an older version of airport utility
AirPort Utility 5.6 for Mac OS X Lion
http://support.apple.com/kb/DL1482
Hope that helps
Similar Messages
-
Operating System: os x 10.9.1
Airport Utility 6.3.2
Airport Express 802.11n (1st generation)
Linkus router: Model WRT310Nv2, Firmware Version 2.0.01
Motorola Cable Modem: Model 2210-02, Firmware 7.7.3r5
The Airport Express (AE) is setup to join my wireless network using Airport Utility. A printer is connected to the AE with a USB cable. After the setup the AE light is green and the printer can be accessed over the wireless network.
The problem starts if the router is cycled off/on. Now the AE will not rejoin the wireless network and there is a non-flashing amber light. If the power to the AE is cycled off/on the AE reconnects to the wireless network.
This is about as handy as a screen door on a submarine.
Is it possible to see the setting of the AE the same way the modem and router settings can be accessed? Can this issue be fixed?If they send you a replacement printer it will have ink tanks with it. You can store the ink tanks from your current printer and use them later on you "new" printer if you wish. Store them nozzle-up so they do not leak.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Hp6600 does NOT recognize my wireless network IN THE WIZARD
My hp6600 does not recognize my wireless network. It recognizes others in the area but not mine I have tried the network wizard several time and the online help but it's not working. I bought this machine especially so that I can print wirelessly. It would cost me $100 to have someone from Geek come in, that's ridiculous. i should be able to set up my own printer. I set up a hp8600 at home.
Hi @fedup22,
Welcome to the HP Forums!
I am sorry to hear that your HP Officejet 6600 is not recognizing your wireless network, but I am happy to help!
For further assistance, I will need to know some additional information:
If the printer is able to make copies.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue as it address the fact the printer is offline.
Printer Does Not Maintain Wireless Connection. (Once established this guide will help you maintain the connection.)
This website as a lot of information on wireless printing. Wireless printing center.
Hope this information helps, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?
Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/ -
Dropbox does not show up as an option for "Save As" as OneDrive does (came preinstalled that way). Dropbox is installed but I had to use Selective Sync since the Stream only comes with a 30GB drive and my Dropbox account is 1TB.
Hi @gatesoui ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Stream Notebook and issue with DropBox. Here is the support site for Dropbox.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
New 4S does not show waiting voice mails? How do I fix?
New 4S does not show waiting voice mails? How do I fix?
What do you mean by waiting voicemails? It tells you a number that includes missing calls new calls voicemail too. If its red circle under messages or the phone it means something is new.
-
I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls
If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141 -
I have just installed Qicltime Pro but when I edit a video file and try to set the In and Out points, it does not show any way to set them. It trims the video down to the one point on display. Have I installed the software correctly?
QuickTime Player 7 Pro is in the Utilities folder.
To set in and out points set the position you want in the timeline and tap the i key. Move to the end of your selection and tap the o key. To step frame by frame move the playhead by tapping the left/right arrow keys. -
I have a different Apple id on my PowerBook from that on my iMac and iPad. Photo Stream does not connect to my Powerbook. How do I change the Apple id in iCloud on my PowerBook? Will this link all 3 machines to PhotoStream?
You can't simply change the details.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button) -
I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Hi,
I am really struggling to update my iphone software. I believe that I am currently on version 4.2.1 and would like to update yet my general settings menu does not offer a software update option.
What would be the best steps to take?
Any help would be great.
Thanks
TConnect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
Can I use my Airport Express as an end point on a wireless network and connect a computer via the ethernet port? - I'm wanting to connect a computer that does not have wireless and is in another building.
The requirements for this to work are:
1) The AirPort Express must be the 802.11"n" version. Model Number is A1264
2) There must be adequate wireless signal stength where the Express will be located
3) The Express must be configured to "join" the wireless network with the option checked to activate the Ethernet port -
Airport extreme usb printer does not show on macbook
I have been trying to set-up a printer on a Airport Extreme through the USB cable. However, the printer does not show under "Printers and Scanners" and the help on-line has not helped at all.
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work. -
Hi, I'm trying to make my first IPhone app. After having problems with interface builder the first time I coppied the code directly from a tutorial in case I made any mistakes. I saved the program, and re-opened the .xib file. Right clicking File's Owner does not show a list of methods. I've been looking around for solutions for this but have not gotten anything to work. I tried deleting the default .xib and creating a new one through file-> new file. This did not help. I did notice that File's owner was showing up as a light blue cube apposed to a yellow one now and found that a bit odd but otherwise nothing changed. I opened the library menu and selected helloWorldiPhoneViewController so it would show up in the view port. I set the class field of File's Owner to hellowWorldiPhoneViewController. File's Owner still does not show methods when right clicked or when a line is dragged over a button. I read somewhere that the color of nib on the lower left of the viewport may indicate a problem, but it is green not indicating any issue. Every solution I found for someone else seems nto to work for me and I don't know how to continue.
here is the .h file just in case:
// HelloWorldViewController.h
// HelloWorld
// Created by Paul Peelen on 2011-03-14.
// Copyright 2011 9697271014. All rights reserved.
#import <UIKit/UIKit.h>
@interface HelloWorldViewController : UIViewController {
UILabel *textLabel;
@property (nonatomic, retain) IBOutlet UILabel *textLabel;
- (IBAction)changeTheTextOfTheLabel;
@end
I'm trying to connect changeTheTextOfTheLabel to a button and textLabel to a labelYou need a parameter for an interface builder method. The type should be id and the name is typically "sender". It would look like this:
- (IBAction)changeTheTextOfTheLabel: (id) sender;
Be careful about those tutorials. Many are ancient and do not correspond to current Xcode behaviour. -
I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?
Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.
Maybe you are looking for
-
Itunes is causing wifi to have hanging issues
I've been running into this issue since the 13th of this month. My wifi is taking longer to load due to itunes. Been checking via my router and this is what shows up: INF 2015-03-13T11:16:47-04:00 acs session started, server: '://cwmp.c01.sbcglobal.n
-
Requirement Tracking Number Not Transferring to Backend
SRM 5.0 SP 7 - ECS We've configured our system to allow users to enter the tracking number withing the Basic Data section of the cart, however when the PO is created in the backend the tracking number details are not transferred. I assumed that this
-
Glass broke a month shy of two years. need advice on best course of action!
The glass on my iphone broke with one month to go before the two year service contract is up. I was planning on buying a new iphone in november. IS there an incentive to wait a month? I think so but I a not sure what it is. If I buy a new one now, be
-
ITunes filling up the ole Drive...
My primary drive is filling up with all the songs I recovered after a recent PC crash. I'm looking to install a "slave" 500Gig HD in the slot underneath the primary. In the past I found out how to point iTunes "Media" folder to an alternate spot on a
-
HT201210 i 'm very angry with apple is the first time i use ipad and after 2 days i try to follow
i am very angry with apple. when I tried to syncronize de device with this computer it stopped to run, I spent a lot of money to buit ipad and a lot of money to conect with internet but it was unuseful.