HT4259 In Airport fireware 7.6.4 how do I extend my network... there is no longer the checkbox to allow this?

Airport firmware 7.6.4 when I select "Create Wireless Network" I can't set the network up to be extendable anymore, there is no related checkbox like in the instructions (yes I know it's old, but look at steps 7 and 8) http://support.apple.com/kb/HT4259 . This is more than annoying because I know both devices I have are capable as I've looked into it already on the internets.
Airport Extreme A1408 (Base)
TimeCapsule 2TB (with airport extreme later version)
Neither allow you to create an extendable network by default with the new firmware. I saw a solution to roll back your firmware version, but I can't do that with Airport software V 6.3.1 which is what I have. And apple won't let me roll that back either... is the problem my local airport utility maybe? Is there another way?
I hope I'm just doing something silly and wrong and someone will just point out the checkbox I've been missing.

Extend wireless is simply no longer required as an option. Apple have assumed it will be extended and it is on by default.
With your main base setup.. I gather you are using the A1408??
Simply factory reset the TC..
Then when you do the setup.. extend wireless is the option that will automatically be offered to you.
I am just going to do it.. Other way around.. but it is the same thing.
So here we go..
I have factory reset the airport extreme.. and it takes a couple of min for it to come up.
You can also see it in wifi.
You can click on it in either place and get into the auto setup function.
I have no network connection at all on the extreme.. it is simply powered on and close to the computer.
It will automatically offer a name.. for reasons I won't go into here but see C9 http://pondini.org/TM/Troubleshooting.html
Give the Extending router a name that is short, no spaces and pure alphanumeric.. you can do it immediately here.
Go next..
Magically it is done..
Now fix up the errors..
Default password.. in my home this is not an issue.. and I don't want to change it ..
So I ignore it.
Second error is firmware is old.
But I much prefer 7.6.1 So I have no intention of giving that up..

Similar Messages

How do i extend my network with a airport express

How do I extend my network with mt airport express

Hi Tesserax, I'd like to join this discussion. It seems Jasonbeyer didn't reply, but I have a question related to his.
I'd like to extend the wireless signal from my Cisco Model DPC/EPC2202 VoIP Cable Modem (802.11n) to the living room where, at the moment, it is non-existent. I assume there's inteference or the signal cannot reach through the concrete walls and rooms leading up from my bedroom to the living room.
My question is:
I'm thinking of extending my wi-fi signal by using the Airport Express and simultaneously using it to connect to my hi-fi to play iTunes from my bedroom's iMac.
Something's telling me it's not going to be that easy. I'm using an iMac (7,1) if that's any help or clue.
What are the things I should take note of and will Airport Express be compatible with my modem? Would I have to get TWO Aiport Express to bridge the signal to my living room?
Thank you everyone for your time. Cheers!
Kane

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

Suggest that you perform a Factory Default Reset as follows:
Pull the Express from power
Wait a few moments
Hold in the reset button and keep holding it an additonal 8-10 seconds while you plug the Express back in to power
Release the reset button and allow 40-45 seconds for the Express to restart
Apple's instructions to do what you want are here:
It will often help to temporarily connect an Ethernet cable from your Mac to the AirPort Express for the setup. Once the Express is configured, you can disconnect the Ethernet cable and move the Express to the desired location.
http://support.apple.com/kb/HT4259
Although an AirPort Extreme is shown as the extending device in the example, the setup for an AirPort Express is exactly the same

How can i print a network configuration page , i need the IP on a ph1510

how can i print a network configuration page , i need the IP on a ph1510

Hi,
What is the exact printer model?
If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlier

My question...
any answers pl.
I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlier

If I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
=
RANKX(
ALL(Table1),
CALCULATE(
COUNTROWS(table1),
ALLEXCEPT(Table1, Table1[ContactReason])
DENSE
If this has missed the mark, would it be possible to clarify the requirement further?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn

How do I extend a network with an AirPort Extreme from an Arris TG862?

I'm using Comcast as my ISP, and after some issues with a previous Motorola modem, they supplied me with an Arris TG862 Router/Modem combo tower. I have two AirPort Extremes, one of which was previously connected to the old Motorola modem to send wireless into the house, but it only reached halfway, so I had the other AirPort Extreme in the middle of the house to "catch" the signal and then broadcast it out to the rest of the house. This worked fine for a while.
But with the new TG862, it doesn't seem to be an option. From what I've read, if I have the TG862 in one room (connected to the cable), AirPort Extreme #1 in the middle of the house, trying to join the existing network (or extend it?), and AirPort Extreme #2 in the far end of the house (to extend from AirPort #1), it won't work. Apple's "extension" technology isn't compatible with all other modems or routers, and even if it was, I'd have to somehow configure the TG862 to "allow to be extended."
So my question is, IF there is a desktop utilizing the TG862 as a direct connection (because it has no built-in Wi-Fi), is it possible to put the TG862 into bridge mode, connect one of the AirPort Extremes and have it act as the router so I can use AirPort Extreme #2 to extend that network out to the rest of the house? I want to ensure the desktop still has a connection, but there's Wi-Fi that actually goes out through the whole house.
The connected-to-the-cable-desktop is a PC; we have multiple iPhones, iPads, and anywhere from 1 Mac laptop to 1 iMac in the house at any given time.

pcbjr wrote:
Topic title pretty well sums up the question.
I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
So, can the Extreme act as an "extender" only, in lieu of using an Express?
Hiya.
You can absolutely extend a network with an Extreme. I've got a 5th gen. Extreme extending a network created with a 3rd gen. Time Capsule. On the Extreme, you'll have the option to allow (or not) WiFi clients. I recommend having all units updated to the current firmware (7.6.1 as of this writing). Note that extending doesn't work in daisy-chain fashion, meaning that your Expresses or Extremes will each connect to and extend from the TC. As such, you'll want the TC to be in as central a location as possible to offer the best coverage.

How can i extend my network using an airport express

I have an airport express that connects wirelessly to an airport extreme. I would like to use it to extend my network. It has a strong signal coming in to it from my extreme. It works fine when I try to connect to the network, but it dies completely when I try to use it to extend my network. After going through a restart, it disappears from the network. The only way to bring it back to life is to unplug it, let it rest a few seconds, plut it in again, and then reset it to Connect to the Network before it crashes again.
I have a model of the express that is supposed to work with extending the network.
Thanks for any suggestions.

I would recommend that you configure your extended network by first placing the Express in the same room as the Extreme. Once the extended configuration is verified, you can take the Express to the desired location.
The key to extending a wireless network with decent overall bandwidth performance is the proper placement of the extending base station. Please check out the following AirPort User Tip for details.

How do I extend my network with two routers?

Hey all,
I've been wondering for a while how I could solve the weak signals that I get in the lower level of my house from my standard Verizon FiOs router. I have an Airport Extreme still lying around after it was taken out and replaced by the Verizon guys when they installed FiOs and I thought I might be able to put it to use downstairs. Is there any way I could put my Verizon router (which is directly connected to the fiber optic modem) and my Airport Extreme together to work in an extended network so that I could have strong signals in both levels of my house? Is it even possible? Any helps on this issue would be greatly appreciated.

Dranakin wrote:
I'm a bit confused about the terms 'network throughput'. Is that referring to the speed of the network? Your internet speed is slowed down when connecting to a remote station?
Yes. At least with an 802.11b or g network, the effective network bandwidth is halved with each remote base station in a WDS configuration. In other words, if the maximum theoretical throughput of an 802.11g system is 54 Mbps, adding a remote base station will reduce it to 27 Mbps.
{quote:title=from Wikipedia:}{quote}
Two disadvantages to using WDS are:
• The maximum wireless effective throughput is halved after the first retransmission (hop) that is made. For example, in the case of two routers connected via WDS, and communication is made between a computer that is plugged into router A and a laptop that is connected wirelessly using router B's access point, the throughput is halved, because router B has to retransmit the information during the communication of the two sides. However, in the case of communications between a computer that is plugged into router A and a computer that is plugged into router B, the throughput is not halved since there is no need to retransmit the information.
• Dynamically assigned and rotated encryption keys are usually not supported in a WDS connection. ...
I didn't really believe it until I added a remote base station and checked my network speed with http://www.speakeasy.net/speedtest/, with and without WDS.
As I understand it, 802.11n networks are not be affected in the same manner due to its ability to handle multiple data streams simultaneously.
If you want to extend your network without sacrificing bandwidth, you can certainly connect the base station Ethernet ports. That is not WDS; Apple calls it "extending a network". That's also how they do it in Apple's retail stores (at least when they used b/g AEBSs).
Message was edited by: John Galt

How to get a N network running with iphones in the house??

Hi there
I have 3 x Airport express (N) stations, 1 x single port ethernet adsl2 modem.
My problem is this,
I want to create a 5ghz N based 300mbps network for our 2 macbooks in the house. We also have 2 iphones in the house. When I create the 5ghz band, the iphones can't see the network. I am only using 2 of the stations, using the "extend my network wirelessly" mode. I have a spare airport that I can add to the mix if a solution can be sort.
At present, one airport plugs into the modem via ethernet, and wirelessly talks to the other in a couple of rooms away.
As I don't have the "dual band" version of the express station, is there anyway to maybe use the "3rd un-used" airport express to communicate with the others, but using a 2.4ghz signal so that the iphones can maybe jump onto that one?

macboi_NZ, Welcome to the discussion area!
You will either need to operate in the 2.4 GHz band OR get an inexpensive wired router to connect to the modem. Then connect 2 of the AirPort Express (AX) to Ethernet LAN ports on the router. Use one of the AXs to create a 2.4 GHz network and the other to create a 5 GHz network. Configure both the AXs to act as bridges (NOT sharing a single IP address).

How do I get a serial number when I enter the number it says this is an invalid number?????

How can I get a serial number when I enter the redemption number in caps and lower case letters , I get indication of invalid Number??????

penteltack,You have purchased Creative Cloud which is active & has no billing issues.
CC mostly asks for serial number if:
1. There is no CC registered to the ID with which you had signed.
2. There are entries of Adobe in Host files of the computer.
3. The activation count has increased.
Please refer to:
Creative Cloud applications ask for serial number
Re: Invalid serial number?
Regards
Rajshree

Airport Express: Extend a network and do Airtunes at the same time?

Hi, I'm trying to organize the people in my apartment building to share an internet connection wirelessly.
The connection is originating from a friend's apartment; he has a Linksys router, probably "g" flavor.
We're going to put one Airport Express in a neighbor's apartment to extend that.
I have an Airport Express connected to my stereo which I use only for Airtunes.
So I'm wondering: can I connect my Airport Express to this network and extend it and ALSO use it for Airtunes?
Also: Can I prevent my neighbors from seeing my Airport Express for Airtunes purposes? IE, I don't want my stereo to show up in the "multiple speakers" drop down of iTunes for other people connecting to the network...
Hope there's a way to work this out...

can I connect my Airport Express to this network and extend it and ALSO use it for Airtunes?
In order to extend the wireless range of the Linksys router, you would have to configure your AX and the Linksys in a Wireless Distribution System (WDS). Unfortunately, very few non-AirPort router are WDS-compatible. The few Linksys models that are reported to be compatible are the WRT54G & WRT54GS.
If you can create a WDS, streaming iTunes should not be a problem.
Also: Can I prevent my neighbors from seeing my Airport Express for Airtunes purposes? IE, I don't want my stereo to show up in the "multiple speakers" drop down of iTunes for other people connecting to the network...
No, but you can establish an iTunes Speaker password so they would not be able to stream to it.

How to create extended range network using three apple airport extremes?

Hello! The idea is, I want to use Apple routers to create a large range network for a hotel that has 300 FT Hallway. I have tried everything in the airport utility but nothing works. The idea is, in the whole 300 FT hallway, i want to put three apple airport extreams. one in the middle of the hallway which will be connected to the modem, one on the each end of the hallway that will be connected to the middle airport extreme via eithernet or extend network range option from airport utility.
Image shows, what I am trying to achieve.
http://imageshack.us/scaled/landing/35/10e6.jpg
These what I have tried so far. Airport extreme is refered here as "airport"
1. Connect Airport 1 to modem, then on Airport 2 use extend network feature to extend the range of airport 1 network. This did not work. Airport 2 keeps on blinking yellow.
2. Did same thing as step 1 but also tried it using ethernet cable going from Airport 1 in to Airport 2's ethernet inbound port.
3. Connected modem to switch, from swith one ethernet cable goes in to Airport 1 and one cable from SWITCH goes in to the airport 2's ethernet port.
Only thing that works is, if I connect ONLY ONE airport to the modem or the switch. I am not able to use two airport extremes together.
Please advise what I can do using these or other apple products to have extended wifi coverage in the entire hallway.
I, however do need to use three extremes as one is not enough to cover the area.
Thank you.
Hopefully some one can help me and correct me where I am doing something wrong.
Thanks.

Exactly what model extreme are you using??
What device is being used as setup with airport utility?
1. Connect Airport 1 to modem, then on Airport 2 use extend network feature to extend the range of airport 1 network. This did not work. Airport 2 keeps on blinking yellow.
Amber blinking just means something needs adjusting.. it should still show up in the utility and you can find out what the extreme is complaining about. If not start over.. it is absolutely crucial you factory reset and start over.. the extreme must present as a new wireless device in wifi and then you can setup to extend the existing wireless.
2. Did same thing as step 1 but also tried it using ethernet cable going from Airport 1 in to Airport 2's ethernet inbound port.
This is a much better arrangement.. The Extreme plugged into the Modem.. what mode is it in? It must create a wireless network.. make sure the network name is short.. no spaces and pure alphanumeric.
The extreme plugged into to give better range.. must be in bridge mode.
It must create a wireless network of the exact same name.. exact same security settings and same password.
Follow the instructions here if you do not follow.
http://support.apple.com/kb/HT4260
3. Connected modem to switch, from swith one ethernet cable goes in to Airport 1 and one cable from SWITCH goes in to the airport 2's ethernet port.
This is the same configuration as 2. There is no difference where you put the switch.
Only thing that works is, if I connect ONLY ONE airport to the modem or the switch. I am not able to use two airport extremes together.
Setup according to the apple instructions for roaming network.. it will work.
If it fails give us more info.. what model AE. etc.
Also give us the IP address and screenshot of each units setup for wireless.

How can i transfer my music from iphone to itune. currently itune wouldnt allow this as i have also used my ipad? the message i get it says: the iphone is synced with another itunes library. do you want to erasethis iphone and sync with this itune?

an iphone can be synced with one itune library at one time. erasing and syncing replaces the contents of this iphone with the contents of this itune library!!
apple..... ypu sale these gadgets which i love but I dont want to earse the music on my iphone i would like to save them into my library, how can i do this? most of the music i have bought and i dont want to loose any of it!!!
Please someone help me.

The iphone is not a storage/backup device. The sync is one way - computer to iphone. The exception is itunes purchases: File>Transfer Purchases
Copy everything from your other library/computer, or your backup copy, to your new library/computer

TS1277 In The last Apple Itunes update it deleted the file MSVCR80.DLL, how do I get it back, i have followed all the instructions to remedy this lost file to no avail.

In the last Apple Itunes update it deleted the file Msvcr80.dll, how do get it back so I can download Itunes again?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT5552 how do I purchase items from wish list-none of the choices are purchase this song in version for computer-this is crazy!

in recent dowwload of I tunes-how do you purchase items listed in your wish list. There are 5 choices beside each song but none say-"purchase this song. Where do you go to actually purchase songs?

You need to click on the item's actual price, not the downward pointing arrow next to the price - you should then get a prompt to buy it. You will need to buy each one individually.

HT4259 In Airport fireware 7.6.4 how do I extend my network... there is no longer the checkbox to allow this?

Similar Messages

Maybe you are looking for