HT4262 How to configure Airport Express (first generation) from Mountain Lion 10.8?

In OS X 10.8 / Mountain Lion, when I open the Airport Utility (version 6.1) and attempt to configure my first generation Airport Express (b/g), the Airport Utility displays the error "This version of Airport Express cannot be configured with this version of Airport Utility. Download Airport Utility version 5.6." However, I cannot locate a download location for Airport Utility 5.6 which works on Mountain Lion (there is a version which works on Leopard and Snow Leopard).
Does this mean I can no longer configure my access point?
Or am I just overlooking the download location for Airport Utility 5.6 for Mountain Lion / 10.8?
Thanks!
/eh

See this thread for more info:
https://discussions.apple.com/message/19299375#19299375
The pertinent info is as follows:
The 2nd Generation Express was introduced mid-June this year, so if you purchased your Express before that time, you either have a 1st Generation Express, or an even older model that did not use the "Generation" nomenclature.
Please check the label on the side of the Express and look for the Model No.
If you have the "old" version, you will see Model No A1084 or A1088.
If you have the 1st Generation Express, the Model No will be A1264.
If you do have the older version of the Express, unfortunately Apple will not allow you to install AirPort Utility 5.6 on your Mountain Lion machine. In other words, the "older" versions of the Express are no longer supported in Mountain Lion.
There are some "unofficial" or "unsupported" ways to do this....with no guarantees....so I am not sure whether you want to contact Apple Support or an Apple Store to see if Apple plans to introduce AirPort Utility 5.6 for Mountain Lion, or whether you want to try an unsupported procedure to see if it might work.

Similar Messages

Airport Express 1st Generation and Mountain Lion

I am trying to configure an 1st generation Airport Express. The current version for Mountain Lion does not support this hardware. The last version of Airport Utility will not install on Mountain Lion. Is there another solution? This Express is old but works. Is the only way to configure it is to use a Mac with Lion on it? Thank you.

A 1st Generation AirPort Express will work with Mountain Lion. Check the model number on the side of the Express in the faint print.
A 1st Gen model is A1264.
If you see A1084 or A1088, this is a much older version of the Express.....which Apple likely wants you to replace.
If you want to try to use it, see the information in this thread. This is not supported by Apple, so your results cannot be predicted.
https://discussions.apple.com/message/21397085#21397085

Airport express 1st generation on mountain lion

I have a mac os 10.8 (mountain lion): can i use an airport express 1st generation? The mac doesn't recognize it and tells me to download airport utility 5.6, but 5.6 doesn't seem to exist for 10.8, only 10.7.

Just upgraded to ML and now I can't supervise the Extreme base stations (A1088). Argh.
This should have been mentioned somewhere (during the upgrade or something). Because my devices are 1st generation devices, albeit G-mode ones. This distinction should be made clear in the documentation and/or knowledge base articles.
Also the new airport utility (6.1) suggests I install 5.6, which, even tho, available on the website it doesn't seem to be installable in ML. By the way the KB mentions that it supports Lion (10.7.2) or later.. yeah right!
Now I'm stuck with no solutions available. Any other idea before I hack together a VM just for airport utility 5.6?

Is the Airport Express first Generation compatible with Mavericks?

I've an Airport Express first generation, and since upgrading to Mavericks, it doesn't show anymore in Airport Utility, and the light on it keeps blinking.
The Airport Extreme works fine.
Any help is welcome.
Thanks.
Pedro

The second row in this article discusses AIrPort Utility 6.3.2, which is the current version that runs under Mavericks.
It says the first generation AirPort Express is compatible.
http://support.apple.com/kb/HT1998

AirPort Express (first Generation) doesn't get recognized with latest Itunes. (everything has the latest updates). This is on WIndows 7. Just started today after getting latest Itunes Version.

I am sure this has been addressed, but I will ask again, and then start sifting through prior posts.
I have Windows 7, AirPort Express (First Generation), and the latest Itunes (11, I believe). All updates are current on the both the Itunes and AirPort Express. All of a sudden today, when wanting to play music off of Itunes (it does show that I have both outlets checked and in blue [my computer & airport]) after about a minute it displays a statement saying "The Network Connection Timed Out". And then finally plays on my computer. This just started today. It has always worked, and now, not sure what to do. I have unplugged and plugged back both the airport express and my router.
Any help would be so much appreciated. This is truly why I hesitate to get the newest version of Itunes. There always seems to be an issue. Anyway...HELP!
David

A bizarre update.
Decided to use the XP VM to handle the iPhone and it was downloading the latest update when it failed.
At that point Windows 7 iTunes popped up to say it had found an iPhone in recovery mode. I let it try a restore which also failed (VM couldn't complete the restore either).
Plugged the iPhone back in to my old PC to complete recovery and restore and then plugged it back in to the Windows 7 PC - which now can't see the iPhone!!
So it detected it when in recovery mode but not when it was functioning normally.
Are older versions of iTunes available to allow the backout of 10.4 which just seems so flaky on 64 bit Windows 7?

IP Address Conflicts - iMac and Airport Express, Snow Leopard and Mountain Lion

In our home we have an iMac, two Mac notebooks, an iPad, an Apple TV and a Sony Playstation that all use wi-fi. I have a recurring problem. When several devices are connected to the Internet through Airport Extreme (wi-fi) downloads really slow down. Since the Airport Extreme is connected directly to a Motorola cable modem that also has wi-fi, I often shift my iMac wi-fi connection to the Motorola cable modem to speed up the Internet. Lately I have been getting an IP address conflict message in a pop-up box when I shift to the cable modem wi-fi. The system preference shows the IP address automatically assigned via DCHP. It also offers the option of DHCP plus manual.
I am now using Snow Leopard and intend to upgrade to Mountain Lion.
How can I resolve the conflict? Or, should I consider some other wifi network configuration? Is the upgrade to Mountain Lion likely to resolve the problem or make it worse? Can I use the DHCP plus manual to manually assign an IP address to the iMac to resolve the IP address conflict, and, if so, what it the procedure?

Is the DHCP assignment being done by your cable modem or your AirPort Extreme?
What is the exact text of the conlict message, and where does it pop up?
If your cable modem and your AirPort Extreme are both running DHCP servers for the same subnet (which they really should not be allowed to do), they must be set to assign addresses from disjoint pools.

Airport express not printing in Mountain Lion

Installed Mountain Lion no problem but having trouble printing wirelessly to an Epson R260 connected to an airport express. Worked flawlessly in Lion. Now, I can install and reinstall the printer wirelessly but when it goes to print the process just "processes" and nothing happens. The Epson site is not helpful. It gives instructions for software update with the printer physically connected by USB, but following those instructions the app store says no updates (on anything).

I have three printers up and running connected to an Air Port Express,
and since I upgraded to Lion I can't connect to any of them, so I continued using SL on this MBP17.
System Preferences does not show any of my printers.
I opened Air Port and it says I need to update.
When I click on the update button, it takes me to the App Store, but no Air Port Software — What gives?
Now having the same problems with Mountain Lion.
Hoped ML would fix the problem, but NO.
I find I have to save documents to a flash drive and go to my old PowerMac G4 to print.
Steve we miss you. Apple is going to crap without you.
Message was edited by: random47 to fix typos and add information.

How do I revert to Snow Leopard from Mountain Lion? I do not have the setup disk that came with my MacBook but I do have the Snow Leopard software.

I upgraded to Mountain Lion and very much regret this move. I cannot use Parallels or Bootcamp for Windows XP which I need for some of my 'older' accessories. How do I revert from Mountain Lion back to Snow Leopard? I have the Snow Leopard software but I do not have the original setup software disk that came with the MacBook (leant to a friend and never seen again).

If you do revert to Snow Leopard, be aware of this "feature" I used with my 2009 MacBook Pro:
When it had the original OS (Leopard, I believe) I set up Bootcamp with Windows XP. I also installed Parallels and use the Bootcamp partition for Windows XP within Parallels.
I then upgraded to Snow Leopard and all was fine.
I then upgraded to Lion and still my Bootcamp partition works for Windows XP and also for Parallels.
I have not upgraded to Mountain Lion so I cannot speak to whether or not the Bootcamp paritition of Windows XP will continue to work. If you do and it works, LET US KNOW!

How to configure Airport Express N router and Netgear G router with Extreme

I have a primary Netgear G router (WRT54G) connected to my cable modem box. I have an Airport Express N router streaming music in another room and also extending the wireless network.
I am planning to demote the Netgear router as a switch + wireless network extender connected to my home theater setup (dish+apple tv+ps3) and purchase a new dual band Airport Extreme connected to the cable box and acting as the main router.
My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G? That's the reason why I want the Extreme. If yes, how to go about doing it? If not, I will just buy a cheap switch and use that for the Home theater and leave the current setup alone. Anyone who has a similar network, please advice. Thanks!

My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G?
Yes. To do so, you would need to connect the Netgear to the new 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet, and then, reconfigure it as a bridge (disable both its NAT & DHCP functions).
In this configuration, the AEBSn & AXn can provide the 802.11n network and the Netgear can provide the 802.11g network.

How to configure Airport Express to Extend Wireless Network

I have an Airport Extreme (AE1) as my wireless router, with two other Airport Extremes (AE2 and AE3) connected to it via ethernet and operating in bridge mode. Together they cover the first floor of my house with wifi, but I want to use an Airport Express (AX1) situated on the second floor to connect wirelessly to AE2 and extend my wifi network to the second floor of my house.
Nothing I have tried has allowed AX1 to extend my wireless network. I'm using the latest Airport utility in Mavericks, and AX1 is the old plug-in type but it's the newer "n" version that is still configurable by Airport Utility. Any suggestions would be appreciated.

I almost ALWAYS recommend against wirelessly extending your network. Obviously, I'm unfamiliar with your layout but 3 extremes on the same floor seems like overkill, too, but could make sense depending upon contruction and usage.
In any event -
Adding Wi-Fi base stations when it is unnecessary can reduce Wi-Fi throughput because the Wi-Fi network will require more data management overhead. The network configuration also becomes more complex. In the case of a wirelessly extended network, throughput may be reduced to less than 60 percent of that of a single device.
Risk free test - run some speedtests in the corners then remove an extreme and re-run the tests. Then, buy one of the new tower 'AC' extremes and set it up as your single router and test again. I call this risk free since you have 14 days to return the new 'tower' extreme if you don't want to keep it but its range is THAT much better than the prior gen. You could make this cheaper by buying it from the Apple refurbished store and selling your older extremes.

How can I manage an older airport express base station with Mountain Lion?

This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support."
I tried to install AirPort Utility 5.6 on my Mac OSX 10.8 Mac Book and it will not allow me to. How do I manage my "older" airport?

The 5.6 version can be installed but it does take an alternative route to do so. For example, you can use a utility like Pacifist to first extract the utility, and then, move it to the Utilities folder. Once "installed" by this method, it runs just fine on Mountain Lion.

HT2508 airport Express not working in Mountain Lion

My old airport express stopped working properly since I loaded Mountain Lion. I purchased a new Airport Express and it will work, but the audio fades in and out. I am connected from the airport express unit to my audio receiver via a 3.5 out into RCA (red/white) connector into the receiver. Can someone suggest a cure?

I have three printers up and running connected to an Air Port Express,
and since I upgraded to Lion I can't connect to any of them, so I continued using SL on this MBP17.
System Preferences does not show any of my printers.
I opened Air Port and it says I need to update.
When I click on the update button, it takes me to the App Store, but no Air Port Software — What gives?
Now having the same problems with Mountain Lion.
Hoped ML would fix the problem, but NO.
I find I have to save documents to a flash drive and go to my old PowerMac G4 to print.
Steve we miss you. Apple is going to crap without you.
Message was edited by: random47 to fix typos and add information.

Problems streaming music to Airport Express via Airtunes in Mountain Lion

Ever since upgrading to Mountain Lion, I have been encountering some strange behavior regarding my ability to stream music to speakers connected to my network via Airport Expresses. Initially, the speakers appear in iTunes, and I can select them and stream music to them perfectly. Eventually, however, they no longer stream music and appear unselected in iTunes. When I try to select them again, I cannot. After clicking on them, they appear connected for a few milliseconds before disconnecting again. I have found that restarting my computer resolves this problem.
I believe this is a Mountain Lion issue because, even when I can no longer select the speakers, I can still stream music to these speakers from both my iPhone and my iPad.
I also have a set of Airplay enabled speakers (Zeppelin Air) and I can stream to these speakers even when the Airport Express ones are not functioning. I interpret this to mean that my computer, iTunes, and my router are all capable of streaming music.
I had hoped that iTunes 11 would fix this issue, but it hasn't. I have found posts to simiar problems on these forums, but they often involve receiving various error messages from iTunes. I never receive any error messages, streaming to the speakers just stops and cannot be restarted. Streaming worked perfectly in Snow Leopard and for the brief time I had Lion. I find needing to restart my computer repeatedly to be a rather inelegant solution to this problem. Any insight is appreciated.

What's also strange, is that if I log onto another user on the same computer, the streaming works fine. That means that the problem lies within my user account, doesn't it?
Are there any preference files that I can safely delete within my user library to reset any preferences that are ****** up?
Also, I don't know if it might have something to do with it, but I'm running Little Snitch. Don't see that there are any rules I've set up that might interfere with AirTunes, though!

How do i reboot to factory condition from mountain lion startup disc

I have a 2009 macbook pro 2.4 Ghz 8GB which had snow leopard installed but has been upgraded yo mountain lion, when I purchased mountain lion I made a bootable drive on a usb drive, what I need to know is how do I reset my macbook pro to factory condition.
Thanks in advance
Nonebutfrank

Information.
Selling old Mac
Selling old Mac (2)
Selling old Mac (3)

How to configure AirPort Express 802.11n (1st generation) in OS X 10.7.5

I have an old Airport axpress and cannot configure it anymore since I updated to OSX 10.7.5.
Can somebody explain how I can fix this?
Greets

Contact the softwareproducer.
That would be Apple.
If you are sure that you have downloaded the correct version of AirPort Utility 5.6 for Mac OS X Lion and you continue to see this error message, you will likely need to re-install the Lion operating system on your Mac.
Contact Apple Support first, before you attempt this.
http://www.apple.com/support/contact/

HT4262 How to configure Airport Express (first generation) from Mountain Lion 10.8?

Similar Messages

Maybe you are looking for