HT4285 my trackpad shows up as a connected device but i cannot control the cursor

my trackpad shows up as a connected bluetooth device but i cannot control the cursor

Reset your computer's PRAM
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html

Similar Messages

How can I get my old iTunes music onto my new computer without access to my old computer? I left my previous job and forgot to transfer my music. I bought iTunes match and it shows my old Mac as a device, but I cannot get the music off it.

How can I get my old iTunes music onto my new computer without access to my old computer? I left my previous job and forgot to transfer my music. I bought iTunes match and it shows my old Mac as a device, but I cannot access any of the old music. All I can find are what was on my iPhone, but that's not what I want. I need all my old music from my old Mac, which has been wiped clean by IT at my old job. BUT, I did have iCloud at that time and I thought all my music would be accessible through it. I don't understand the Cloud! And I'm thinking spending $24.99 on iTunes Match was a waste of money because I still can't access my old music.

When you are done with this issue, consider the computer back at the office may still
have access to your iTunes account, and it should be de-auhorized. You can do that
remotely, but be sure you carefully do not mess up your other computer iTunes libraries.
Good luck & happy computing!

VPN Connection Established but now cannot access the internet

I am running Mac OS X 10.4 and have successfully downloaded Cisco VPN Client version 4.9.01.0080.
Although I can successfully establish a connection, I am no longer able to connect to the internet - my internet connection can only be regained if I disconnect from the VPN.
Please note I am NOT a technical resource so please provide the 'for dumnmies' version of any suggestions!
Thanks.
Debra

I am still unable to get out on the Internet. Ironically, my Skype still works. I cannot reach Internet sites by name. After carefully going through config I already had split-tunneling which is why it works for my Windows machines.
I have only tested this Macbook Pro 17 and no other MAc frankly, but I'll try on another Mac.
Any other ideas a.alekseev?
This is what I have done:
I have split tunneling, I have the newest Cisco VPN Client for Mac, I can VPN in with my username and everything, ut I cannot hit websites by name. Basically I am unable to resolve. I opened a gaping hole on the firewall just to test and still nothing.
What's next?

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

I've also had the same issues, after upgrading to IOS 6.0, the apps in my iPhone 4 were crashing and the battery life run out very fast.
The only solution worked for me was to remove all mail accounts (Exchange/Gmail) from my iPhone (in settings) and then add them back.
The crashing were stopped! also the battery was back to normal.
I found the solution by first looking at the crash logs (in IOS 6). you can find them at Settings -> General -> About (at the bottom of the About menu you will find the option that opens the logs).
There i saw many logs about Low Memory crash. 99% of the logs were pointed that the largest process (use the most memory) during the crashes is "dataaccessd".
I search in the web and found that this process is a deamon process that reponsible the Mail accounts (like Exchange/Gmail) and contancts list.
I've installed the app "System Status - activity monitor" which shows important system info like CPU usage, Memory usage and running processes.
Before apply my solution (deleting the mail accounts) i saw that the CPU usage was very high which consume the battery very fast. Also i saw that the memory (RAM) was run out.. which probably what cause the crashing..
After deleting the mail accounts (at Settings -> Mail, Contacts, Calendars) i check again with the System Status app, and saw that the memory and CPU were back to normal.
Adding the mail accounts back, still everything work ok
Hope this solution will help you too,
Enjoy!

Transfered Videos to Library it shows on my Iphone 4s but in GREY [ on the pc when connected] and thus I cannot play the video, WHY

Transfered Videos to Library it shows on my Iphone 4s but in GREY [ on the pc when connected] and thus I cannot play the video on IPHONE 4s, WHY??

Sorry it IS ios 7.04

TS1398 When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet. The second I turn off the wifi on my iphone, everything runs perfec

When my iphone connects to wifi, everything else in my house will not connect to the internet. They all show 3 to 4 bars on connection strength, but unable to access the internet. The second I turn off the wifi on my iphone, everything in my house runs fine. What is going on?

Had a similar problem a number of years ago with a laptop my daughter had. The probelm turned out to be the router. What kind of router do you have? Have you checked for firmware updates, or at least tried re-booting it?

DexterM - Printer connected wireless but Notebook cannot connect to printer?

Hi all,
I will be a brief and clear as possible. I really hope someone can help! thanks in advance.
DexterM, if your still arond I think maybe you would be familiar with this type of thing. I will be as concise as possible.
I incorrectly removed some HP folders in an effort to remove the bloatware. (shop and participation program etc).
Anyway, I damaged my install because Solution Center disappeared! I needed it to scan multiple page PDF docs.
I tried to uninstall and re-install the Full Software package (my printer is B110a) 10s of times. Each time the Installer showed that 'Solution center' is already installed. It was not installed.
Eventually after days of trying to fix this, I took the drastic measure of remving some HP keys from the registry. Not randomly of course, but from a solution post on this board. I only removed about 4 HP keys. I was very careful not to remove any Windows ones. (I se Win7).
So.. Solution center then installed. Hooray! Everything seemed perfect. EXCEPT....
I had removed 2 keys related to the Network. Something like NET HPz12 and something similar.
Now when I tried to connect my printer wirelessly (using the USB to wireless process) it cold not find any wifi networks even though there were several in the vicinity.
I found a solution on this forum which involved right clicking on the network.msi file and choosing uninstall, then re-installing it. This did the trick! now when I ran the "USB to Wireless" process it instantly found my wireless "your PC is connected to SSID blah blah blah, is this correct". Yes. It continued the network diagnostic but always failed at this point.
I think because some service or reg key is missing the computer cannot commnicate directly with the printer, but it can see it at http://192.18.1.2 etc via browser. so all is connected properly, but something is preventing the laptop from commnicating with the printer.
So to recap.
Laptop works perfectly with printer via USB.
Printer is connected to my wireless without isse. I can see it at http://192.168.1.2 etc
Laptop cannot connect to printer though, and fails everytime I run the 'usb to wireless' process.
I suspect one of the NET keys I deleted frmo the reg is to blame? Or some missing windows service?
The network diagnostic utility says "network software missing, please reinstall or fix and try again". I have uninstalled and reinstalled 10s of times now. It's not putting back no the required network service/key thats missing.
Argh. please can anyone help. Someone must have been here before? I have a screen shot too of the 'USB to wireless' process failing. It shows the connection is there, but something is not right.
image 0 - the 'usb to wireless process' picks up my wireless without any problem. ok
image 1 - during the 'running diagnostic on network' part of the process it fails
image 2 - not much to go on here. I reinstalled and uninstalled 4 or 5 times already. same thing.

Nobody? Im really stuck here... Been onto support 3 times and they cannot help. I need someone with expert skills who will understand which windows service or driver or key is preventing the notebook from talking to the printer even though both are on the same network successfully. No AV or FW on the network either.

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that's not the case because my coworkers are connected. Can someone

I'm trying to connect to my work's VPN. I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable. I know that’s not the case because my coworkers are connected. Can someone please help me?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

If your Mac is new-ish and has one of the Lions as its OS, the drives, cards, USB sticks no longer show up, even though they're there. Go to Finder's Preferences and tick the corresponding items in the General and Sidebar tabs.

I work for a retailer who sends out e-receipts as pdf attachements. When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment. Any ideas?

i work for a retailer who sends out e-receipts as pdf attachements. When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment. Any ideas?

i have scrolled left, right, up and down on iphone4, iphone5 and ipad and the attachment simply does not exist. It has to be something with the apple mail client setup because for any mail client, if they go to the webemail thru safari, the attachment is there and it can be viewed without issue.
I know there are plenty of people out there with this issue with the mail clients set up that you access thru the email icon on the iphone and ipad but i cannot find anyone with a resolution. I cannot find any settings in the mail client setup that has anything to do with attachments or for what attachments can or cannot be read or seen.
Hopefully someone out there has figured something out because this is an odd one.

The 3G symbol is not showing up on my home screen and I cannot browse the net, any suggestions?

The 3G symbol does not show up on my home page and I cannot browse the Internet or receive mail. Any advice?

reset the iphone
1. press the wake/sleep button the top until you get the red slider
2. Slide to power off
3. Wait for phone to power off (you get a spinning gear icon for a while)
4. press the wake/sleep button to turn in back on.
if that doesn't work reset network settings
1. Go to Settings->General->Reset->Reset Network Settings
2. Confirm that you want to do this and the phone will restart itself
if that doesn't work restore the phone in iTunes, but you will want to sync all of your data before you do that.

I plug my ipod in, and it says it needs to be charged and never charges or shows up on my computer. But it works in the charger

I plug my ipod in, and it says it needs to be charged and never charges or shows up on my computer. But it works in the charger. I cannot sync it, and the computer doesn't detect it. It charges in the charger, but as soon as you unplug it, the ipod shuts off. Doesn't charge in the computer at all.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

I downloads the latest iTunes software update and it properly installed. But, I cannot close the window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the

I downloaded the latest iTunes software update and it properly installed. But, I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the window. Tried to quit on both the big window and the software update title in the menu bar. No luck.

Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue. It did not help. Found a very similar question in the discussions and it recommended "Force Quit". That worked and the update works normal and the window is gone. Thanks!

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support?

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support in the UK?
Thanks

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

HT4285 my trackpad shows up as a connected device but i cannot control the cursor

Similar Messages

Maybe you are looking for