HT4291 need help to get ipod working again

reseted my ipod touch, now its stuck on the appe logo n does nothing else.. is there anythhing i can else i can do

- Try a reset;
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect to computer and try to restore via iTunes
- If logo still showing, let the battery fully drain. After charging for an hour, try the above again.

Similar Messages

I have my ipad locked and need help to get it working again

how can I unlock my ipad

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808

HT6154 My iphone 4GS is disabled due to trying to log on too many time. I need help to get phone working again what do I do?

I lost my I phone and I tried to find it. It put a passcode on it and I didn't know it. I tried to long on too many times and now my iphone is disabled. How do I restore?

See this support document for instructions. You need to restore the phone. http://support.apple.com/kb/ht1212

Error 213.5 Please help me get DW working again. Thanks CaptJim4685

I have a Mac OS 10.10 used the Migration Assistant to move all files from old computer to new computer yesterday. Now can not use my Dreamweaver CS 5.5 program I have my original install disk. Tried that. get error 213.5 Please help me get DW working again. Thanks CaptJim4685

Hi Nancy O.
Thing is, I was using it on my old MacBookPro, also w/ yosemite. No problem. So I think it should run on the new one with the same OS.
I did figure out how to find the CC cleaner log file. It had a lot of stuff in it, but did not indicate any kind of failures. I did not see the word “failure in the log file at all.
After your suggestions, I went thru all the steps again - twice - very carefully emptying the trash between steps and restarting. Got the same error message at the end.
Now, I still have 5.5 working on the old computer. That was my first and only install. My notes suggest I installed it in 2011.
If I knew for sure that if I deactivated it (if I knew how to do that) on the old computer, and uninstalled it, AND I could then count on the install working on my new computer, I would do it, but I am afraid to do that for fear that then I wouldn’t have it to use at all.
I had expected it to transfer over, and then I would clean the old computer, as my son wants it for his wife, They have no use for DW.
I also had trouble w/ MS Office, but they allowed me to call them and get a new install code. Now that Works fine.
I wish Adobe were as accommodating. I have my original install disk & code. I never expected any of this trouble.
I hope you can come up with a new plan. I really can’t afford to buy a new copy, especially when I know that this one should work, if it would just get rid of this blocking action.
I only use it for editing my own personal family website: http:www.americanfenner.com. I am not a webmaster/webwriter/ computer programmer or anything like that. Just an old guy doing personal stuff on my mac.
Jim Fenner
[email protected]

HT1430 my ipod id disabled and says connect to itunes how do i get ipod working again

My ipod is disabled and says connect to itunes, i can't seem to get it working, help!!!

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Toshiba 3D TV conked off after automatic Software Update!! Need help to get it working like before

Hi there,
I' Using the Toshiba 46TL963G TV since 5 monts, recetly i asked for the **bleep** new software update and I let it install (ofcourse its connected via ethernet cable). After instalment the TV restarted automatically and everything was fine. I could watch TV well and I turned it OFF. and later Next morning When I turned On, it doesn't function anymore!!
How Crap is this TV.. It does the automatic software update and it conks off itself!!!
and the most annoying thing is that I went to this website "http://support.toshiba.com/" to get the support for this TV and when I entered the 8 charachter moderl of my TV , it say, wrong entry. WTF!!!! You dont clain your own product as yours??
Please help me how can I get my TV working fine as before, else I really have to start working on creating a blog "Reason Why one SHOULD not buy TV from TOSHIBA"
- Many thanks
Aravind

Peter, You _know_ that the firmware update crashes the TV. There have been enough reports of this online, and so much of it here on this forum that you cannot have missed it. Users need to resort to auto-flashing the firmware with files that are not publicly available from your site. Could you not at least remove the offending firmware from the list of things the television can automatically download? Aravind, you might try contacting the toshiba support to get them to send you the correct file to put on an USB device to force the TV to launch the update once plugged. Roaming the forums, it seems like this file should be something like "46TL963G_******_INIT_CLEAR.bin". Kellindil

I need help to get this working I can't get anything to load in my SWF.

// drop shadow filter class import
import flash.filters.DropShadowFilter;
// transitions imports
import fl.transitions.*;
import fl.transitions.easing.*;
// Determine where on the stage we want to have the thumbnail images start
xStartPos = 40;
yStartPos = 20;
// Create our XML object
var imageList:XML;
// Setup our XML loader and tell it the file path to our XML file.
// Also, add an event listener to call the loadComplete() function
// when the loading of our XML file is complete.
var xmlURLLoader:URLLoader = new URLLoader();
xmlURLLoader.load(new URLRequest(xmlURLRequest("loadImages.xml")));
xmlURLLoader.addEventListener(Event.COMPLETE, loadComplete);
function loadComplete(e:Event):void
try {
// Build new instance of XML object (imageList) and copy into
// it the data from e.target which is the xml_loader object (which
// contains the data loaded from our XML file).
var imageList:XML = new XML(e.target.data);
// Grab all of the file_type elements (tags) from our imageList
// XML object (which now contains all of the data from our XML file)
// and store them in an XMLList object (somewhat like an array).
var imageList:XMLList = imageList.file_type; // our image file locations
var imageArray:Array = new Array();
var i:int = 0;
numImages = xml.ImageList.length;
// Place all of our image filenames into our imageArray by
// stepping through the xmlImageList XMLList object one element at a time
for (i = 0; i < numImages; i++)
   // push the filename text from each element of our XMLList object
   // (xmlImageList), which contains all the file_type elements (tags)
   // from our XML file, onto our array one element at a time.
   // Note: we created a property called our_source in our imageArray
   //       which we will access again in function stageImages().
   imageArray.push({our_source:xmlImageList[i].text()});
// Call stageImages() function which will put the images on the stage
stageImages(imageArray);
catch (error:Error)
// ignore errors for now - could put trace() statements here
} // end function loadComplete()
function stageImages(imgArray:Array):void
// Build a loop that creates the image movie clips and puts them on the stage.
// When we say the image movie clips we really mean the movie clips that hold
// the images.
for (var i:int = 0; i < imgArray.length; i++)
// Begin the image loader
var imgLoader:Loader = new Loader();
imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, imgLoadCompletes);
// Reference our image array
imgLoader.load(new URLRequest(imgArray[i].our_source));
// Create a movie clip called pic_mc which is the instance name
// of ALL of our images. This will allow us to apply effects like
// drop shadows or whatever we want to our image movie clip instances
// all at once.
var pics_mc:MovieClip = new MovieClip();
// Now, tell our movie clips what their x and y positions will be
pics_mc.x = xStartPos;
pics_mc.y = yStartPos;
// Add the just-added image movie clip as a child of our pics_mc movie clip.
//     So, another way of saying it is we are throwing each loaded image
//     movie clip inside our pics_mc movie clip as we load each image in the loop.
// imgLoader is an array of images (our entire list of images) and it is
// being loaded here INTO our pic_mc movie clip AS A CHILD.
pics_mc.addChild(imgLoader);   // pics_mc is a container for our images
// Here is how we set the number of columns for our thumbnails (based
// on 7 columns). CHANGE THE 7 TO HAVE DIFFERENT NUMBER OF COLUMNS
if (((i + 1) % 7) == 0)
   // Let's set the x and y positions...
   // This is how we separate the amount of space we want in between
   // images as they slide out or stack up. Change these values if you
   // wish to have more or less columns.
   xStartPos = 10;    // CHANGING THIS VALUE WILL PUSH THE COLUMNS LEFT/RIGHT
   yStartPos += 40;   // CHANGING THIS VALUE WILL ALTER VERTICAL SPACING OF PICS
else
   // CHANGE THE 100 TO DRAMATICALLY CHANGE WIDTH BETWEEN COLUMNS
   // AND THE 46 TO CREATE MORE SUBTLE DISTANCE BETWEEN COLUMNS
   xStartPos += 100 + 46;
} // end function stageImages()
// Define what happens once our images are loaded...
function imgLoadCompletes(e:Event)
// Get access to our image loader object we were using when this
// function was called.
// Type-cast e.currentTarget (our imgLoader object from above) as
// a LoaderInfo object and access its loader property which is the
// loader object associated with this LoaderInfo object (in our case
// the imgLoader object which the event listener was listening on above
// in the stageImages() function).
// We are now calling it by the name image_loader.
var image_loader:Loader = e.currentTarget as Loader;
// Access the parent movie clip of our image loader object. We called this
// pics_mc above in the stageImages() function.
var pics_mc:MovieClip = image_loader.parent;
// Begin our fill and drawing of graphics - the Polaroid Effect - did this LATER
var imgWidth:Number = image_loader.width;
var imgHeight:Number = image_loader.height;
var spacingFillWidth:Number = 15;
var totalSpacing:Number = spacingFillWidth;
var totalSpacingFillWidth:Number = imgWidth + (totalSpacing * 2);
var totalSpacingFillHeight:Number = imgHeight + (totalSpacing * 2);
// TRY THIS and then COMMENT IT OUT as we'll be using drop shadow rather than stroke
// Set a stroke width value and place a stroke around our parent_mc movie clip
//var strokeWidth:Number = 1;
//parent_mc.graphics.lineStyle(strokeWidth, 0x000066, 100);
// Begin drawing art for the fill
pics_mc.graphics.beginFill(0xCCCCCC, 100);
// Draw rectangle (add 100 to height to get Polaroid background look)
pics_mc.graphics.drawRect(-totalSpacing, -totalSpacing, totalSpacingFillWidth, totalSpacingFillHeight + 100);
// End fill
pics_mc.graphics.endFill();
// Create drop shadow instance (shadow) and set its parameters (same as
// you would if you were manually adding a drop shadow filter
// DO THIS AFTER COMMENTING OUT STROKE LINESTYLE ABOVE!
var shadow:DropShadowFilter = new DropShadowFilter();
shadow.alpha = .5;      // alpha of 50%
shadow.distance = 15;   // distance of drop shadow from movie clip
shadow.angle = 90;
shadow.blurX = 15;
shadow.blurY = 15;
// Apply our drop shadow to our movie clip
pics_mc.filters = [shadow];
// Scale the image clips down as thumbnails for the initial display of
// images on the stage. Set this according to your own image sizes
pics_mc.scaleX = .05;
pics_mc.scaleY = .4;
// optional - rotate our fake_mc movie clip in a random fashion.
// CAN PLAY WITH THE 3 TO ALTER ROTATION
pics_mc.rotation = Math.round(Math.random() * - 10) + 3;
// set up dummy placeholder properties to hold a copy of our
// x and y position values.
pics_mc.origX = pics_mc.x;
pics_mc.origY = pics_mc.y;
pics_mc.addEventListener(MouseEvent.MOUSE_DOWN, onMouseClick);
pics_mc.addEventListener(MouseEvent.MOUSE_UP, onMouseRelease);
} // end function imgLoadCompletes()
// Called if user clicks on one of the thumbnail images
function onMouseClick(e:MouseEvent):void
// Make each separate movie clip its own target
var thumb_mc:MovieClip = e.currentTarget as MovieClip; // cast it as a MovieClip object
// Expand thumbnail that was clicked so it scales to full size
thumb_mc.scaleX = 1;     // note 1 = 100% for scaling in AS 3.0
thumb_mc.scaleY = 1;
// Last thumbnail image clicked on will be on top -- this part is optional
// Each item on stage has a childIndex number which defines its depth (z-axis)
// in the stacking order of items on the stage (or within another object). The
// higher the childIndex number of an object the closer the object will be to the front.
// numChildren is a property that contains the number of children in an object (in
// our case the stage).
setChildIndex(thumb_mc, numChildren - 1);
// Set location of thumbnail image on the stage. Note that these
// values are based on the bottom of where our images line up and
// our stage dimensions of 1000x700.
thumb_mc.x = 250;
thumb_mc.y = 250;
// Set transitions once thumbnail images are clicked
//var showImage:Object = {type:Fade, direction:0, duration:1, easing:Strong.easeOut};
// Blinds has a problem letting us select larger image and move it back to thumbnail
//var showImage:Object = {type:Blinds, direction:0, duration:1, easing:Strong.easeOut};
// PixelDissolve doesn't always allow us to easily select larger image either
//var showImage:Object = {type:PixelDissolve, direction:0, duration:1, easing:Strong.easeOut, xSections:30, ySections:30};
var showImage:Object = (type:Photo, direction:Transition.IN, duration:1, easing:Strong.easeOut);
TransitionManager.start(thumb_mc, showImage);
// For more info on Transitions, search for Transition class in Help docs
} // end function onMouseClick()
function onMouseRelease(e:MouseEvent):void
// Get reference to the larger image that was "moused up" on.
var big_mc:MovieClip = e.currentTarget as MovieClip;
// Tell the image to return to its starting location as a thumbnail image
big_mc.x = int(big_mc.origX);   // Typecast origX and origY properties to int
big_mc.y = int(big_mc.origY);
// Scale the larger image back down to thumbnail image
big_mc.scaleX = 0.2;
big_mc.scaleY = 0.2;
} // end function onMouseRelease()

Here it is without comments. No didnt do any tracing. I only get one error saying Scene 1, Layer 'Actions', Frame 1, Line 236 1084: Syntax error: expecting rightparen before colon. I know there has to be more wrong with the code please help me find them.
import flash.filters.DropShadowFilter;
import fl.transitions.*;
import fl.transitions.easing.*;
xStartPos = 40;
yStartPos = 20;
var imageList:XML;
var xmlURLLoader:URLLoader = new URLLoader();
xmlURLLoader.load(new URLRequest(xmlURLRequest("loadImages.xml")));
xmlURLLoader.addEventListener(Event.COMPLETE, loadComplete);
function loadComplete(e:Event):void
try {
var imageList:XML = new XML(e.target.data);
var imageList:XMLList = imageList.file_type;
var imageArray:Array = new Array();
var i:int = 0;
numImages = xml.ImageList.length;
for (i = 0; i < numImages; i++)
   imageArray.push({our_source:xmlImageList[i].text()});
    stageImages(imageArray);
catch (error:Error)
} // end function loadComplete()
function stageImages(imgArray:Array):void
for (var i:int = 0; i < imgArray.length; i++)
var imgLoader:Loader = new Loader();
imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, imgLoadCompletes);
imgLoader.load(new URLRequest(imgArray[i].our_source));
pics_mc.x = xStartPos;
pics_mc.y = yStartPos;
pics_mc.addChild(imgLoader);
if (((i + 1) % 7) == 0)
   xStartPos = 10;
   yStartPos += 40;
else
   xStartPos += 100 + 46;
} // end function stageImages()
function imgLoadCompletes(e:Event)
var image_loader:Loader = e.currentTarget as Loader;
var pics_mc:MovieClip = image_loader.parent;
var imgWidth:Number = image_loader.width;
var imgHeight:Number = image_loader.height;
var spacingFillWidth:Number = 15;
var totalSpacing:Number = spacingFillWidth;
var totalSpacingFillWidth:Number = imgWidth + (totalSpacing * 2);
var totalSpacingFillHeight:Number = imgHeight + (totalSpacing * 2);
pics_mc.graphics.beginFill(0xCCCCCC, 100);
pics_mc.graphics.drawRect(-totalSpacing, -totalSpacing, totalSpacingFillWidth, totalSpacingFillHeight + 100);
pics_mc.graphics.endFill();
var shadow:DropShadowFilter = new DropShadowFilter();
shadow.alpha = .5;
shadow.distance = 15;
shadow.angle = 90;
shadow.blurX = 15;
shadow.blurY = 15;
pics_mc.filters = [shadow];
pics_mc.scaleX = .05;
pics_mc.scaleY = .4;
pics_mc.rotation = Math.round(Math.random() * - 10) + 3;
pics_mc.origX = pics_mc.x;
pics_mc.origY = pics_mc.y;
pics_mc.addEventListener(MouseEvent.MOUSE_DOWN, onMouseClick);
pics_mc.addEventListener(MouseEvent.MOUSE_UP, onMouseRelease);
function onMouseClick(e:MouseEvent):void
var thumb_mc:MovieClip = e.currentTarget as MovieClip;
thumb_mc.scaleX = 1;
thumb_mc.scaleY = 1;
setChildIndex(thumb_mc, numChildren - 1);
thumb_mc.x = 250;
thumb_mc.y = 250;
var showImage:Object = (type:Photo, direction:Transition.IN, duration:1, easing:Strong.easeOut);
TransitionManager.start(thumb_mc, showImage);
} // end function onMouseClick()
function onMouseRelease(e:MouseEvent):void
var big_mc:MovieClip = e.currentTarget as MovieClip;
big_mc.x = int(big_mc.origX);
big_mc.y = int(big_mc.origY);

IPhone 6 saying no Service need help to get it working agian

still no joy i have been in to a local EE shop and got a new sim card its still saying No Service. what is the wait on a new sim card activation?

Right day 3 with this issue went agian in to a EE store last night on my way home and tested the issue phone with a working EE sim card and it worked fine (so the phone is fine and working). so the sales person had a look at the submissinon of the sim update (or activation) and the request has been put thought and was told to wait a few hours for it to refresh. So i waited a few hours and still nothing. so i called tech support i was told that there is a issue with my account this an issue that quite a few iphone users are having the lady on the phone said that this issue would be resloved this morning after 8am and still no signal (still saying no service). has any one got any update on when my service will be back to normal?

Need help re-synching iPods with new computer and getting iTunes to...

Need help re-synching iPods with new computer and getting iTunes to recognize our iPods (it doesn't even recognize them when they're plugged in).
Hubby wiped my harddrive for me, so now I need to get everything back in proper places. I'm using windows XP and installed iTunes once again (I believe it's version 8). I also installed all of my iTunes songs. Now I need to know where to go from here. We have 3 iPods and I need to get them all synched once again. I know how to create different libraries for each of us, but I can't figure out how to get our songs back into our iTunes libraries. When I open iTunes and plug in an iPod, iTunes doesn't even show that an iPod is plugged in.
What do I do now to get each of our iPods synched with our own libraries?
TIA
Brandy

Thanks Zevoneer. The "Restart ipod service" worked and itunes is now recognizing my ipod! Hooray!
Okay, now how do I synch all of our ipods with our individual libraries (I don't want all of my kids' songs and vice versa)? We each have hundreds of songs on our ipods that we don't want to lose.
Thanks again!

Itunes stops working when accessing the store what needs to be done to get it working again?

itune stops working when accessing the store. What needs to be done to get it working again?

Hey Baitmaster61!
Here is an article that will help you troubleshoot this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If you are still experiencing issues with reaching the iTunes Store, you may also need to reference this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Hi. my ipad battery is not charging well. max at around 20%. what do i need to do to get it working again?

hi. my ipad battery is not charging well. max at around 20%. what do i need to do to get it working again?

You may need to recalibrate the battery. See link below.
Are you using the wall charger?
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

HT4623 My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My ipod classic 120gb doesn't restore when i try??? error 1429 pops up? how can i get it work again?

my ipod classic 120gb doesn't restore when itry? error 1429 pops up. what can i do to get my ipod working again??

Found an article that describe the issue you are facing:
http://support.apple.com/kb/ts1372

My daughter has forgotten the password to her ipod? What do i have to do to get it working again?

My daughter has forgotten the password to her ipod? What do i have to do to get it working again?

Connect the iPod to the computer she uses and restore the iPod via iTunes. Place the iPod in Recovery mode if necessary to allow the restore.

HT1222 hey i need help with my ipod, i try to download facebook app and it wouldn't let me because it say ios 4.1 require and i dont have ios how do i get it ?

hey i need help with my ipod, i try to download facebook app and it wouldn't let me because it say ios 4.1 require and i dont have ios how do i get it ? please i need help ASAP

What generation of iPod touch do you have? If you don't know, see:
http://support.apple.com/kb/HT1353
If you have an first-generation iPod touch, it can only go to iOS 3.1.3 and hence will not run the Facebook app. If you have a second-generation iPod touch, see:
http://support.apple.com/kb/HT4623
Regards.

HT4291 need help to get ipod working again

Similar Messages

Maybe you are looking for