HT4314 Game Center will not connect and will not disable in Hayday, even if I am connected in  the game center app

I cannot get connecting to Game Center except periodically.  When playing Hayday not only will it not connect it will no disable either so it pops up so often you just can't even play the game.  It happen on another game that is connected to game center also.  I will not get involved with any other game that requires game center at this point if it cannot be fixed.  I already changed my password with is a major pain and now I have this long password and before I had a short one.

Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

Similar Messages

  • After trying to down ios 7, iPad will not charge, will not open and will not connect to itunes.  The only display I will get is the apple logo, or low battery warning.

    After trying to download ios 7, iPad will not charge, will not open and will not connect to itunes.  Sometimes, screen will switch from Apple logo to low battery notification, but doesn't look as if battery is charging.

    Connect with cable to computer.   Your ipad is in recovery mode.
    Follow directions to fix
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • HT6162 My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

    My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

    Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
    The app store always gives you the option to use a previous version of the app IF it is available for your device.
    Sorry but you are stuck without new hardware.
    PJRS

  • Why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • My 30-pin dock is connected to my lightning to 30-pin connector which is connected to my iPod touch 5g. But my iPod will only charge, and will not play music through my dock.

    My 30-pin dock is connected to my lightning to 30-pin connector which is connected to my iPod touch 5g. But my iPod will only charge, and will not play music through my dock, only through the iPod's internal speaker. Help please!

    Have you tried resetting both the iPod and dock? To reset the iPod, press and hold the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    To reset the dock, unplug it and plug it back in.
    B-rock

  • Hi, I just bought the new i phone 5. I have plugged it into my computer a few times to run the back up and it has previously worked fine. When i try to connect it into the computer it is not recognised and will not do anything at all??

    few times to run the back up and it has previously worked fine. When i try to connect it into the computer it is not recognised and will not do anything at all??

    By calling iPod tech support while you are under warranty.  You also have 14 days to return it w/no questions asked for a replacement or your $$$ back. 

  • TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

    My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

    Hello Jane Benstock,
    Thank you for using Apple Support Communities
    It sounds like the next best step to take would be to reset the iPod Shuffle.
    Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
    All the best,
    Sterling

  • TS3367 My FaceTime will make the call but will not connect and will sometimes say call failed. What do i do?

    My FaceTime will make the call but will not connect and will sometimes say call failed. What do i do?

    don't update to iOS7 just yet if you prefer 6.  Many are saying that's the cure, but there are lots of iOS7 users here who can't make Facetime work either.
    It would seem Apple has either a big problem on their hands, as this is now a week old, or they don't know how to fix it.  Either way, email Apple tech support your concerns

  • My shuffle will not connect and is not recognized anywhere

    I have had my shuffle for quite awhile... just after they came out with them. Everything has been going fine with it until about a week ago I connected to update it and a window popped up that said "Your iPod may be corrupt...". Since then I have not been able to connect my shuffle to my computer, it will not charge, and is not recognized by any computer. If anyone can help me I would greatly appreciate it, if not I guess its time to get a new iPod. Thanks!
      Windows XP  

    A good news/bad news post...
    I had the same problem, with my shuffle (original
    512k). I couldn't run the reset utility because the
    computer (imac) wouldn't even recognize that it was
    connected. I pretty much gave up on it, but last
    night I plugged it into the USB port to try it one
    last time - nothing happened. But I forgot to pull
    it out when I shut down and this morning while I was
    working suddenly the shuffle was recognized by the
    computer (actually a box came up saying the device
    needs to be initialized or something). I quickly ran
    the reset utility, the shuffle was recognized, itunes
    launched and I was able to add music. I was so
    excited I decided to share the news with the forum,
    but while typing this very message the shuffle
    disappeared from the desktop and I got a message
    saying the device was removed improperly. Now the
    bad news... if I plug in the shuffle it is once again
    unrecognized by the computer. But at least I got
    some tunes back on it, until I buy a replacement! And
    it did charge...
    iBook
    G3, iMac G5 Mac OS X (10.4.9)
    Try it in the iBook's USB ports...

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • My mail will not open and will not let me quit it. Help?

    My mail will not open and will not let me quit it. Ive tried to restart my computer but it wont let me do that because it says the Mail has canceled the restart. It does the same thing when I try to shut it down. Can someone help?

    Welcome to Apple Support Communities
    Press Alt, Command and Esc keys, select Mail and force close it. Finally, restart or turn off your computer

  • Ipod shuffle will not charge and is not recognized by itunes or computer

    HELP, My G2 ipod shuffle will not charge and is not recognized at all by my computer or itunes. it is like there is nothing even pligged in to the usb port. and when i plug in my ipod to the charger my ipod blinks orange 4 times and then stops whats going on?

    Is your phone itself working OK?

  • HT1476 upgraded my IPOD 5 to iOS 7.0.2 and will not charge battery. when plugged in gives message "This cable or accessory is not certified and may not work reliably with this IPOD".

    Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
    When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
    Anyone else have this issue after they upgraded the iOS system?
    Thanks,

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • Compiler warning: Source folder "server" does not exist and will be ignored

    Hi,
    i am using NWDS 7.0 SP16. I have a development component type "J2EE Sever Library", which uses a java component. Everything works fine, except during the build i get a warning "Warning: Source folder "server" does not exist and will be ignored.".
    Then i created the folder named "server" manually, but the build finished again with warning, now saying:
    "Warning: Source folder "server" exists but is empty and will be ignored."
    I created a dummy-file in the directory "server" and now the compilation is fine, no warnings.
    I like to get my build free of any warnings, so what's wrong here? I found no documentation to create the folder/file manually.
    Any help is appreciated.
    Regards,
    Thomas

    Hi Raman,
    I am also getting the same error . i moved my srm transports from DEV to QA and replicated the datasources into BI . and then i moved the BW transports from dev to QA.
    when i check the datasource it is pointing to D60 instead of Q60 . when i check the transformations getting the same error :
    source system dosen't exist.
    can you please let me know how you resolved this issue. your reply will be  highly appreciated.
    Regards,
    Sri

  • Iphone 4 not recognized and will not sync after latest itunes update.  I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

    iphone 4 not recognized and will not sync after latest itunes update.  I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Maybe you are looking for