HT4314 Gamecenter has problem in connection?

Hello my gamecenter is not connected. I can not either sign out or sign in, it is always turning and trying to connect. When i play my games, they are redirected back to where i was days ago. i am tired, Please help me.

Configuration for cable connection:-Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then again check the WAN Ip address ..... & you will be able to go Online!!!

Similar Messages

  • WRT54G V.8 has problem in connection

    I just opened a new account at Time Warner for my cable modem. And later I came back home, tried to hook-up the modem with an old wireless router which I used before. But there is no linksys wireless connection on my wireless list. My roommate bought the router last year, so it is almost one year till now, and unfortunately, I lost the install CD during moving. I downloaded the manual, and tried to open 196.168.1.1, but it needs username and password. I remembered that I logged on this web before, but I forgot the username or password, so I cannot log on with blank in username and admin in password.
    And I called your technician support, they told me that my router is out of warranty, which I don't know what it means. Does it mean that I have to buy a new router every year?
    I can get online right now through cable, but my roommates need wireless. So we really need some help!

    Configuration for cable connection:-Access the setup page of the router by launching an
    Browser and type on the address bar, 192.168.1.1 and press enter. When
    it prompts for the username and password, leave the username field
    empty and provide password as "admin" (Without quotes)
    click on ok.
    On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    Click Clone & click save settings
    Check WAN Ip on Status page of router ....
    If getting Valid Ip .... try going online
    If not ... power cycle for 4-5 minutes & then again check the WAN Ip address ..... & you will be able to go Online!!!

  • I have problems to connect my iphone 6 with IOS 8.0.2 to my citroen c5.

    My iphone 6 has problems to connect to my citron c5 via bluetooth. After several attempts I was able to pair the phone to the car but neither are the contacts from the phone accessible by the car nor is can I successfully create calls using the car.

    I was having problems with this too. I remember it working okay in iOS 7 and then it breaking in iOS 8.
    Fortunately, I'm now on the iOS 8.1 beta, and can confirm it's working fine for me. Just how it used to. - I guess that's one of the bugs that Apple's new software will bust. We'll just have to wait it out.

  • Macbook sometimes has problems connecting

    The brief summary is that my Macbook (white, core duo) has problems connecting to my G network when it has been on sleep mode. A restart usually fixes the issue until the computer goes to sleep again.
    The G network is comprised of a Linksys WRT54GS that connects using WDS to the AirPort Express (G model). This network is used for any devices that use B/G and to share a printer. I use MAC address filtering (the lists are updated on both the AirPort Express and the Linksys routers), and security is WEP 128 (Because I could never get WPA or WPA2 to work with WDS...)
    Here is what I've done to try to remedy the situation:
    * Tried to remove the wireless security, and just let the MAC filtering work. This had no effect.
    * Tried to remove the MAC filtering, and just let the wireless security work. This also had no effect.
    * Tried to unplug the AirPort Express. _This worked, and allows the Macbook to connect everytime._
    This leaves me somewhat puzzled; why would restarting the macbook allow it to connect? (this would imply the problem is with the airport express, not the macbook?), Is it more likely that it's the AirPort Express device itself or a problem with the WDS linking? (Airport Utility shows everything is fine). I use manually-assigned IPs, but could it be a problem with IP lease times?
    While most computers use the Airport extreme N network (which is wired to the linksys router), all iPod touchs (5 of them), iPhones, and two PCs use the same G network and have never exhibited the same problem. I have reformatted the white macbook, deleted any airport preference files, etc., to no avail.
    Any help or insight is greatly appreciated. Thanks,
    Dave.
    Message was edited by: Dave Luebbert

    Dave,
    Check some settings on your Macbook as follows:
    Open System Preferences and click on Network so that your connections are displayed on the left of the pane.
    Click the small gear shaped icon at the bottom of the connection list area
    Select Set Service Order and make sure your Airport connection is at the top of the list so that it will be first in line for a connection. (If ethernet is set first now, your computer is spending time trying to find an ethernet connection before it looks for an Airport connection).
    Now click on your Airport connection on the left to highlight it and click Advanced at the lower right of the pane.
    Make sure that your network is at the top of the list of wireless networks so your computer won't spend time looking for other wireless networks first.
    Delete any networks that you no longer need.
    Make sure there is a check mark next to "Remember any networks this computer has joined"
    Leave the next two boxes unchecked.
    Any help?

  • This Server has no web connection defined- Problem by publishing a web repo

    Hello.
    My problem is that when I create a query in the Bex and want to publish it on the web I get the error message:
    This Server has no web connection defined.
    When I enter the Url of a template directly in my browser it works.
    Where do I have to define the web connection in the system - because I search now nearly 6 hours to get it to work.
    Rgards
    Tim

    You'll need to add the icm/server_port_0 instance parameter using RZ10 as it probably does not have the port and protocol defined.  SAP needs to be restarted to pick up the change.  You would then need to start transaction SICF and select the services under BW, right-click and then select Activate.  There are OSS notes on this as well, maybe search for SICF.  Transaction SMICM can be used to verify that the services are running.

  • The boundaries of the screen of my iPhone 5S started twinkling and it has problems connecting to wifi (both problems appeared at the same time), does anybody know what to do?

    I have an iPhone 5S, I charged it this morning and after that I noticed that it had two problems:
    1- It detects and connects to wi-fi but has no internet connection (it´s not a problem with the Wi-Fi because it works OK)
    2- The bottom and the sides of the screen started twinkling, it lookes like the distortions that appear when you touch a plasma screen.
    Does anybody know why this happened and how can I fix it?

    Hello, FlorPochi. 
    Thank you for visiting Apple Support Communities.
    This sounds like you may be experiencing a self-assigned IP address.  Try power cycling your router and testing the results.  If the issue persists, I would recommend going through all of the steps in the article below.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    I would go through the steps for display issues in the link below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If the issue persists, see the last section labeled Issue not resolved.
    Cheers,
    Jason H.

  • My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on.

    My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on again. Has anyone else experienced this problem and if so, is there an easy fix. I have been advised by Apple that the latest IOS update may overcome this situation but I'm only on slow download speeds and 690 Mb would take forever. I would appreciate any advice.
    Best regards,
    Rob.

    PinguXeF wrote:
    , while I have taken a backup of the iTunes Library,
    this means nothing if it was not done correctly...
    To have  EVERYTHING on a New Computer...
    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751

  • One Z10 works fine, the other has problems connecting to mobile network

    Hi, my wife and I both have Z10's, and we're both on the same mobile network (Wind Mobile in Canada). The wife's Z10 seems to have no problems connecting to or staying connected to Wind Mobile. Mine on the other hand seems to randomly drop the connection, or has trouble obtaining connection, and sometimes ends up roaming.
    The only difference between the two Z10's is that hers is purchased through Wind Mobile itself, and it is locked to their network for the moment. I purchased mine a bit later, and I bought mine directly through Blackberry's online store, and mine is therefore unlocked. What I have to do sometimes is turn off the mobile connection, and turn it back on, and it works after I do that. However, that's annoying, as I'd rather have it automatically retry the network connection so that it doesn't go roaming within my own city.
    Solved!
    Go to Solution.

    If you're passing by a Wind store in the near future, why not drop in and ask if they'll swap SIM cards for you? It could be something with the SIM.
    In the meantime, try resetting your phone. This is equivalent to doing a battery pull and it's usually the first thing I recommend when troubleshooting an issue. Simply press and hold your power button for about 15 seconds until you see BlackBerry on your screen. Don't release the button before that and ignore anything that appears before BlackBerry.
    Let us know if either of those solutions helps you.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • When i enter my apple id into i message it says it has a network connection problem even though it has full internet?

    when i enter my apple id into i message it says it has a network connection problem even though it has full internet?What can I do???

    See my response to one or your three posts.

  • My MacBook Air has problems connecting to a saved network when I first open it.

    My MacBook Air has problems connecting to a saved network when I first open it. When it idles, the connection gets lost and even clicking on the network won't connect it. Then I have to turn off wireless and turn it back on for it to connect. My boyfriend's MacBook Pro does not have this same problem and this problem started maybe 2 months ago and nothing about our internet or router has changed, and its only my computer having the problem. Its a 2013 MacBook Air and my softward is: OS X 10.9.1 (13B42). Please help!

    Hello, nheredia05. 
    Thank you for visiting Apple Support Communities. 
    There are a couple steps that I could recommend trying.  Power cycle the router and test to see if the behavior persists.  Next, try an remove this prefered network from your list and then add it back again.  Make sure all firmware updates have been processed on the router side and the settings have been optimized for performance.  If the issue still persists try the steps in the second article.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    About Wireless Diagnostics
    http://support.apple.com/kb/HT5606
    Cheers,
    Jason H. 

  • New Apple TV has 2 problems - internet connection and remote disk

    Hi,
    I have a TimeCapsule as main router, connected to a wired Modem for Internet access. My PowerBook G4 connects to it wirelessly using WPA2 no problems connecting to the internet and the TC disk.
    I've just added and synced my new Apple TV which has thrown up 2 problems, not sure if they're related: after copying the WPA2 password, ATV connected successfully to the network, but can't find the internet. It has a correct IP address on the network, I checked that in settings. As it can't find the internet, it can't register for my iTunes account, so can't sync protected content.
    On top of that it has problems syncing items on the TC Drive: I have my main iTunes library on the PowerBook G4 hard-disc, and that part synced fine, but most of my movies and TV Shows are stored on the TC disk due to lack of space on the PB. Although they're in exactly the same format as the items on the PB, when I synced, I got an error saying the file type was not compatible with ATV, so iTunes obviously has problems syncing items on the TC although it plays them fine on the PB (well it takes a bit of time connecting, but provided the TC is turned on, it plays them fine). I don't fancy moving them one by one onto the PB, syncing, deleting, etc so I need to get that fixed.
    Any idea on why either problem happens, and whether they're related?
    Thanks in advance.
    Nadine xxx

    The modem is an ethernet modem connected directly to the Time Capsule, not the Powerbook.
    I checked my ITunes account, it says 3 devices can play my purchased material, so that would be my PowerBook, iPod, Work PC - AppleTV missing. I need to somehow kick it into connecting to Apple's Servers and registering with them, which it obviously didn't do at the initial setup.
    The Network issue seems resolved - I started playing one of the movies that wasn't syncing on the PowerBook, which started the Network Disk, the sync obviously didn't try prompting the drive to wake up. It seems to be synching those films now (which obviously takes ages, so can't check for sure until later).

  • Just one month before i bought iphone 5... but the iphone has the internet connectivity problem... while a iphone 4s is cathcing 3G tower, whereas iphone 5 is catching 2G network only.... I've tried so many things to get recovered, but alas

    Just one month before i bought iphone 5... but the iphone has the internet connectivity problem... while a iphone 4s is cathcing 3G tower, whereas iphone 5 is catching 2G network only.... I've tried so many things to get recovered, but alas, nothing is workable- such as- restaring the iphone, reseting the networks etc... Please help me out from this problem..

    to be clear, my phone works fine when not in motion in a vehicle.  If I pull over and come to a complete stop, remaining in the car, my phone works.
    And while the phone is not working when I'm in motion, an internet search or a text message will go through, but I can not use Siri or any voice assistance when doing the text message or internet search.  The microphone is greyed out.
    So this is a unique issue, which appears to be the iPhone and not Verizon.

  • Our home network has multiple devices connected by iCloud. Having problem with Calendar. On one iMac, all the events are duplicated. How can I correct that problem? Under the Calendar accounts, I had my Apple id listed and also just iCloud.

    Our home network has multiple devices connected by iCloud: 2 iMacs, 2 iPhone 4s, 1 MacPro Laptop, and 1 iPad 2.  When using Calendar, all the events were
    duplicated on my husbands iMac.  On his computer, under Calendar accounts, I had included iCloud and also my iCloud ID.  I thought that because I had two accounts listed that were connected to iCloud, that might be the cause of the duplication.  When I deleted ithe calendars from one of the accounts, it resulted
    in deleting all of the events on all of our network devices!
    I have since entered some new events into Calendar from my iMac and from my iPhone.  These appear correctly on all devices except my husband's iMac where they are again all duplicated.
    I have two questions: 1)  How can I eliminate the duplicated events on my husband's computer and 2) How do I retrieve the old wiped out Calendar events from
    Time Capsule.  I don't know how to find Calendar in the Time Capsule.  If I find the Calendar information in Time Capsule, how do I transfer it to my current Calendars?
    I was obtaining phone help from one of the Apple techs at Apple Support, but our call was disconnected part way through.  Didn't know how to reconnect with the tech.
    Thanks for any help.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK.  Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

    I have a problem.
    I bought Pages and Numbers for my iMac and so far everything was OK.
    Suddenly i have a problem with connection to iCloud.
    Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign  (small shape of iCloud), that they are waiting to be uploaded to iCloud.
    I think the iCloud is OK.
    i can see and manage documents in iCloud. i can create them on iPad and  see them and delete them in iCloud.
    But not on iMac.
    i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

    I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

Maybe you are looking for

  • Ipod syncing problems...?

    Im having several ipod syncing problems. I have an Ipod touch, 4th gen with the standard USB cable that comes with to charge it and sync it with. Today, i plugged it into my computer like normal to sync some new songs onto it from itunes. But, it sta

  • Notification Processing - Work flow Management

    Hello friends, My requirement is - When ever a notification is created it needs to be automatically displayed in the Inbox of 'Person/User Responsible'. Which settings needs to be done to activate this work flow? Regards, Narendra

  • Fetch three tables

    Is it possible to fetch 3 tables with single select query(without using view)

  • How to pick and choose files/itunes library to restore onto MBP

    I recently had my HD fail and want to restore my time machine backup now, but I have a lot of garbage I don't want on it. I want to start fresh and just transfer my old iTunes library and still have all my playlists if possible, and some pictures and

  • Simple Logic but annoying

    I got this code from a web site ...it seems easy....The trouble I am having is : when the page loads it shows 10 record per page but when I click next link it shows 20 records on the page...another next will populate 30 records on page...I need 10 re