HT4335 how to enable ipad

Hi,
I havent used my ipad for a very long period and it is now diabled. when i connect it to my macbook pro it says unable to connect to itunes because the ipad is locked with a password but how am i supposed to put my password in when my ipads disabled?
so could you tell me how to sort this problem out. thank you

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Similar Messages

How to enable iPad with right passcode after entering wrong passcode 6 times

Hi, my iPad is disabled because my daughter entered wrong passcode more than 6 times. I do remember the passcode myself.
How can I enable the iPad without wiping everything? I do not see an option to enter passcode anywhere. I never backed up my iPad. When I connect the iPad to iTunes, it keeps on giving the message that respond on iPad. But the iPad only shows that iPad is disabled.
Find my iPad is also not enabled.
I recently upgraded the OS to iOS 8.
Thank you for your help in advance.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

How to enable ipad 2

Haii
i forgot my passcode...how can i enable my ipadplease help me

iOS: Forgotten passcode or device disabled after entering wrong passcode

How to enable my ipad air..

how to enable ipad air...??can somebody help me..

iPad disabled?
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

How to enable TV out in ipad 3. Am not able to connect with HDMI

How to enable TV out in iPad 3. I am trying to connect HDMI cable in my iPad for hooking up to my tv. Please suggest

Link for iPad in Business -
http://images.apple.com/ipad/business/pdf/iPad_Deployment_Scenarios.pdf
Link for iPhone Configuration Utility -
http://support.apple.com/kb/DL1466

How to enable a disabled iPad?

my brother entered the wrong password on my iPad and it got diabled and it says to connect to itunes. But the computer i have synced the ipad to is not working and i have no idea how to enable my iPad. Does anybody know what i can do for this?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

How to Enable Video Mirror in Original iPad, I don't want to hack on it

How to Enable Video Mirror in Original iPad, I don't want to hack on it

Dave Parker wrote:
Where can I learn more about how core OS services are controlled?
Try the developer forum. You'll find many like minded people there to assist you with questions. Most of the people in this forum are end-users.
http://developer.apple.com/devforums/

How to enable my ipad air coz of wrong password and Findmy ipad air is on

How to enable my ipad air because of wrong password and i cannot recover or restore my device coz Find my ipad setting in my device is on. Itunes said this must be off before anything, but i cannot turn it off in setting because device is disable. Help me

Try DFU mode:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

How to enable my desable ipad?

How to enable my desable ipad

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

How to enable back ipad if on disabled mode?

Anybody can help me on this , I forget my passcode. How to enable back my Ipad?

If you've never synced then you won't have a backup on your computer and you will therefore lose all your content from the iPad. You need to connect your iPad to your computer's iTunes - see this page for a locked iPad : http://support.apple.com/kb/HT1212 . You may need to put the iPad into recovery mode first : http://support.apple.com/kb/ht1808

HT4557 I don't have the 'iPod ' option in my iPad in settings menu as shown here. I have music option shown. I have 5.1 os installed. How to enable sharing/streaming of music now?

I don't have the 'iPod ' option in my iPad in settings menu as shown here. I have music option shown. I have 5.1.1 os installed. How to enable sharing/streaming of music now?

Yes.
You need to,turn on Home Sharing in iTunes on the computer. The computer and the iPad will need to be on the same wireless network. You will also need to make sure the same AppleID accosiared with your iTunes is also added to the Music app in Settings.

My ipad is disabled, how to enable it back?

l had key in the wrong passcode for my ipad and now it is disabled, how to enable it back.
Whenever l switch on the ipad, it shows me:"ipad is disabled, connect to itune."
But if it is disabled, how can l get to itune using it.
l also forget my apple id, so l create another one just to enter this community support.
Please help.

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.

HT201210 How does the Ipad get back to Nigerian Store from American Store to enable it carry out Update aand Downloading?

Dear All, please, How does the Ipad get back to Nigerian Store from American Store to enable it carry out Update and Downloading?

Try this.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store

My ipad doesnt have airplay how do i activate it where is it my ipad is only a year old iv tried looking everywhere but cant find how to enable it please help

My ipad doesnt have airplay how do i activate it where is it my ipad is only a year old iv tried looking everywhere but cant find how to enable it please help
[email protected]

The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

HT4335 how to enable ipad

Similar Messages

Maybe you are looking for