HT4341 which adapter works in Chile? Argentina?

which adapter works in Chile? Argentina?

All you might need is a plug adapter, you don't need a converter, but I believe that Colombia uses the same plug system as the US

Similar Messages

  • HT4341 which adapter is used in Israel?

    which adapter is used in Israel? when reffering to world adapter kit?

    Isreal use "H" type socket.
    http://holytourist.blogsome.com/2008/07/14/electrical-power/
    http://www.adaptelec.com/index.php?main_page=document_general_info&products_id=3 15

  • In terms of performance. Which adapter works better ? ADC-VGA or DVI -VGA

    Or are parameters different ? Presently my CRT 20" Sony requires an adapter
    for my G4. My graphics card suggest that I can add another monitor. It will be a LCD with DVI output. Is the performance better from the ADC-VGA option for the CRT ?
    Thanks

    ADC is a digital output so you will get the best performance from a digital panel LCD. An adapter will always costs a little on performance, but if you go VGA you lose quality by default in some area.

  • Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

    I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer.  How can I get my new Imac to read these dvd's?  Will the mini dvd adapter work or do I need to purchase an external dvd rom device?  Which device works well with the Mac?  Do I need anything else to get the dvd material onto my mac?  Thanks!!

    No DV port in camcorder.  Just a yellow AV port/hole.  I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's.  Can I use this with a Mac?  Could I connect a dvd player to the Canopus and transfer the disks onto my Mac?  Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way?  Thanks again!

  • Which adapter do I need to connect my new Mac Mini to my old Apple Cinema HD monitor?

    I have a perfectly good Apple Cinema HD monitor (model M8536), but it has an ADC connection, and my new Mac Mini isn't compatible with it. I've bought a new screen for the Mac Mini, but there are going to be times when I need to run two screens in parallel on the Mini. Can anyone tell me which adapter I need to do this? I've looked at the Apple DVI to ADC connector  (M8661LL), but I'm not sure this is what I need, and they're quite pricey, even second-hand on eBay, so I don't want to make a mistake!
    Thanks!

    Thanks, dwb ... unfortunately I don't think I'd get very much for my old display, it's so old (> 10 years)! But it still works perfectly, and I'm loathe to throw it away ... and there are going to be times when I need the two screens, so even though I've bought a new 27" Philips monitor, it would be good just to buy an adapter to hook up the old screen ...

  • Will this VGA to DVI adapter work on Mac Mini 2006

    This is a simple question which ssomeone should be able to answet
    will this DVI to VGA adapter work on a Mac Mini 2006
    http://www.amazon.com/gp/aw/d/B000067SOH/ref=mp_s_a_1_3?qid=1419898227&sr=8-3&dp Pl=1&dpID=41daTmtKEEL&ref=plSrch&pi=AC_SY200_QL40

    Yes it will.

  • Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

    Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
    I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

    Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

  • Does the Thunderbolt to Firewire adapter work on windows?

    I'm planning on buying an Asus G55VW-DH71 gaming laptop, which has a thunderbolt port. I would like to be able to control my PreSonus digital audio mixer with it, and unfortunately, it only has a firewire for connecting to it. So, I would want to connect Apple's Thunderbolt to Firewire adapter into the laptop and the mixer's firewire cable.
    Does the adapter work on windows 7/8?
    Also - getting a macbook is out of the question.

    I have pretty much the same need as you and purchased a HP laptop with Thunderbolt port and Windows 8.  I also picked up the Apple Thunderbolt to Firewire adapter.  I have been unable to get Windows to detect the Firewire side of the adapter.  Windows 8 seems to pick up the Thunderbolt controller correctly and shows it as an extension of the PCI express bus.
    I have found no set of drivers that I can add that will get the Firewire side to be recognized by Win8.  Win 8 should have 1394b drivers native, so I don't know what the problem is.  I wish I could get this to work, because I just don't have the option of getting a MacBook for the things I need to do.
    Right now the only other Thunderbolt to Firewire option on the horizon seems to be the Belkin Thunderbolt Express Dock, but that has 2 problems.... 1, it is still in pre-order and 2, it is ~$300.
    Mike

  • Lightning to 30-pin Adapter works great with iPad Keyboard Dock

    In case anyone was wondering, the Lightnng to 30-pin Adapter works great with the original iPad Keyboard Dock and an iPhone 5. In fact it is better than the 4S was, as that tended to pop out. The Lightning adapter stays in place, and there is plenty of support in the back plastic to keep the iPhone in place, with any tiny stress happening at the Dock connector end: the Lightning connector itself seems very solid indeed. All the keys work, and charging is fine.
    (In answer to the implicit question: my employer blocks email at work on its systems, and it's convenient to have the keyboard hold the phone in place, and also charge it, which is the problem with the Bluetooth keyboard.)

    Might be a question better asked of the manufacturer of the iHome device.

  • I recently purchased a MacBook Pro with Retina.  Which adapter do I purchase to connect it to a Samsung TV for the best quality?

    I recently purchased a MacBook Pro with Retina.  Which adapter do I purchase to connect it to a Samsung TV for the best quality? Thanks.

    Doesn't matter. All HDMI cables should work, some are considered better than others, I had a $5 ebay cable work just as good as a $20 monster HDMI cable.

  • Getting message Attempt to determine which Adapter Engines......

    Hello All
    1. I am Getting System message 'Attempt to determine which Adapter Engines are affected by data changes failed' in the Integration Directory.
    Updating SOAP Adapter (Sender channel).
    Refreshed all caches...
    2. Also while testing using SOAP Test client getting response
    HTTP/1.1 500 Internal Server Error
    connection: close
    set-cookie: JSESSIONID=(XIServerName_03)ID1387309050DB21025913116517472411End; Version=1; Path=/
    set-cookie: saplb_*=(XIServerName_03)31556950; Version=1; Path=/
    server: SAP J2EE Engine/6.40
    content-type: text/xml; charset=utf-8
    any idea?
    Thanks in advance

    Hi Naveen
    Thanks for your reply...
    Actaully previously sender channel was working fine, i just updated the default namespace in the channel.
    I was getting the error because of wrong namespace in channel (Case sensitive).
    So i updated this name space and after activation i am getting above message while testing.
    Regards

  • Which adapter to but?

    I am thinking of getting a new Mac Mini, but I don't want to buy another monitor. I have an Apple Cinema Display with a DVI-D (male) port for my older Mac Mini Intel, but the new Mac Mini uses Mini-DVI or Mini Display Port. Which adapter do I get? I think its the Mini DisplayPort to DVI Adapter. Am I wrong?
    Message was edited by: Hatchling001

    Welcome to the Apple discussions.
    The current mini's come with a mini-DVI to DVI connector, which should work for you.

  • How DB adapter works when polling strategy is "remove row selected"?

    How DB adapter works when polling strategy is "delete the rows that were read"?
    I want to know how database adapter works when polling startegy is "remove row".This polling strategy helps for polling the changes to table and remove records after new records are inserted or changes are done to table.Here,i want to understand how DB adapter identifies which record to be deleted.
    For example: there is a table with 100 recorrds.How DB adapter works when polling strategy is "delete the rows that were read"?
    I want to know how database adapter works when polling startegy is "delete the rows that were read".This polling strategy helps for polling the changes to table and remove records after new records are inserted or changes are done to table.Here,i want to understand how DB adapter identifies which record to be deleted.
    For example:
    There is a table EMP with 100 recorrds.Now, i deploy a BPEl process with db adapter polling on table EMP for changes.So that ,if any change happen to records in table that records will be picked up.I use a polling startegy "delete the rows that were read" .
    Now i insert 9 new records and update one existing records.These 10 records should be picked up and then deleted by Db adapter.In this 109 records how DB adapter identifies these 10 records when it polls.How it differentiatess old records with new records when there is no flag field or no sequence id used to identify the new or modified records.
    Please let me know.
    Why i want to know this?
    Some times customer may not allow BPEL process to do any modifications to source table or source database.In this case the options provided by database adapter wizard are not useful.
    If there is any mechanism to identify new or modified records without having a FLAG field or sequence table,then it is possible to have an option like only read the changes from table rather than deleting the records after reading.Which helps in meeting above requirement.
    Please let me know if there is any way to do this.
    thanks
    Arureddy

    Once the record has been read it is deleted. Therefore, you can update rows in this table as many times you like before it is read. Once it is read there will be nothing to update as it will be deleted.
    If you don't want to use a sequence table, you can use a sequence file. You can only use this functionality if the key you are using increments sequentially. e.g. 1,2,3,4. If your key is random, e.g. 2,1,3,5,7,4 then your options are delete or use a processing flag.
    The other option is to create a trigger that inserts a key into a polling table when insert or updates occur. You can then use the delete, which is the most desirable as it uses database locking.
    cheers
    James

  • How to decide which adapter to use from IDOC and RFC?

    Hi All,
    When interating XI with an SAP system,
    How to decide which adapter to use from IDOC and RFC?
    Thanks.

    Hi,
    you can also consider to use ABAP Proxy if you are working with Systems based on SAP Web AS 6.40.
    Here some useful links:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm">ABAP Proxy Runtime</a>
    ABAP Proxies in XI(Client Proxy)
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    ABAP Server Proxies
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    How do you activate ABAP Proxies?
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    XI: Reliable Messaging EOIO in ABAP Proxies
    /people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
    More links for proxy:
    proxies and performance...
    Hope this help
    Francesco

  • How does entity Adapter work ?

    Hi,
    I have an adapter which will update the user attribute based on the email. Attached this as <b>pre-update</b> in the data object manager of design console and the mapped the input variable to email(value from entity field) and output of the method to the entity field(field to be updated in USR form).
    Now if I update the user from the admin console, then my adapter works fine.
    <b>But this adapter is trigerred even if I am creating new user through Admin console?? which should not the case as it is pre-update adapter</b>
    Is there anything which I am missing while configuring the adapter or If this is how it works then whats the difference between pre-insert and pre-update adapter??
    Edited by: hrushi on Mar 8, 2010 7:24 PM

    Hi Rajiv,
    Thanks for the post.. :)
    A small doubt about event handler... Can I use tcUserOperationsIntf and update the record from API and attach this with event handler?? Or Is this process different??
    I mean Will I be again thrown into infinite loop if I update from API ??

Maybe you are looking for